Lettura libera · account gratuito per contribuireErede di Anticars (2000)

MercuryMercury Capri

1979–1994 · 2 generazioni · 9 difetti documentati · 1 mercati
Generazioni
Anno modello
MercatoTuttiNA
Capri III · 1991–1994
RichiamoCriticoCarrozzeriaNA

Controllo della velocità del veicolo

Su alcuni pick-up, autovetture, sport utility vehicle e telai di camper, l'interruttore di disattivazione del controllo di velocità può, in determinate condizioni, presentare una perdita interna e quindi surriscaldarsi, emettere fumo o bruciarsi.

NHTSA · Stati Uniti3 ago 200707V336000Anni modello 1994Tradotto automaticamente · originale: ingleseVedi dettagli →
Capri III · 1991–1994
RichiamoCriticoCambioNA

Power train:Automatic transmission:Cooling unit and lines

The transmission fluid rubber tube connecting the transmission to the transmission oil cooler located in the radiator can become disconnected from the transmission, resulting in discharge of transmission fluid.

NHTSA · Stati Uniti5 nov 199393V180000Anni modello 1993Mostrato in inglese originale · traduzione in attesaVedi dettagli →
Capri II · 1979–1986
RichiamoCriticoAbitacoloNA

Sedili e sistemi di ritenuta

Un'esposizione prolungata alla luce solare può causare il deterioramento e lo spostamento della boccola in plastica del gruppo linguetta della cintura di sicurezza anteriore che trattiene la barra di blocco. Ciò potrebbe comportare il distacco della linguetta dal nastro della cintura, rendendo la cintura inutilizzabile per l'occupante del veicolo. Correzione: ai proprietari verrà comunicato che Ford riparerà le cinture di sicurezza che presentano questa condizione.

Transport Canada28 set 19921992117Anni modello 1984–1985Tradotto automaticamente · originale: ingleseVedi dettagli →
Capri II · 1979–1986
RichiamoCriticoAbitacoloNA

Seat belts:Front:Anchorage

The plastic sleeve in the front safety belt tongue assembly which retains the lock bar can deteriorate from prolonged exposure to sunlight and become displaced, causing the tongue to detach from the safety belt webbing.

NHTSA · Stati Uniti29 apr 199292V063000Anni modello 1984–1985Mostrato in inglese originale · traduzione in attesaVedi dettagli →
Capri III · 1991–1994
Capri II · 1979–1986
RichiamoCriticoMotoreNA

Sistema di alimentazione

On vehicles with EFI or CFI, the spring-lock fuel line coupling used to connect the fuel supply and return lines to the EFI fuel rails or to the CFI throttle bodies, as well as other fuel line connections near the dash panels on some vehicles, could disengage during vehicle use. Should this occur, loss of fuel will result, providing the potential for a vehicle fire. Correction: Coupling retainer clips will be installed on affected vehicles. Note: Escort vehicles are equipped with EFI and CFI. Lynx vehicles are equipped with CFI only. EFI - electronic fuel injection; CFI - central fuel injection

Transport Canada9 set 19871987098Anni modello 1986–1987Tradotto automaticamente · originale: ingleseVedi dettagli →
Capri II · 1979–1986
RichiamoCriticoFreniNA

Richiamo

The tandem power brake booster rear shells may have been produced with reduced wall thicknesses. Repeated brake applications could cau se such a shell to crack and the booster assembly to come apart.This could result in a total loss of braking capabilty without prior warn ing and present the possibility for loss of control and vehicle cras h.

Transport Canada31 mag 19851985070Anni modello 1985Mostrato in inglese originale · traduzione in attesaVedi dettagli →
Capri III · 1991–1994
RichiamoModeratoAbitacoloNA

Air bags

The air bag modules do not meet the ford specifications for high ambient temperature performance.

NHTSA · Stati Uniti2 giu 199292V080000Anni modello 1991–1992Mostrato in inglese originale · traduzione in attesaVedi dettagli →
Capri II · 1979–1986
RichiamoModeratoAbitacoloNA

Seats And Restraints

The forward screw which provides part of the attachment between the driver`s seat back assembly and the seat cushion frame could fracture and permit the driver's seat back to pivot rearward. Such a condition could adversely affect the driver's ability to control the vehicle and could result in a vehicle crash. Correction: New driver's seat cushion attachment screws will be installed on affected vehicles.

Transport Canada17 mag 19881988066Anni modello 1981–1983Mostrato in inglese originale · traduzione in attesaVedi dettagli →
Capri II · 1979–1986
RichiamoModeratoFreniNA

Service brakes, hydraulic:Power assist:Vacuum

Brake booster rear shells may have reduced wall thicknesses which could cause the shell to break. Consequence of defect: Repeated brake use could cause the shell to crack and the booster assembly to come apart. Service brakes capability would be totally lost without warning and could result in an accident.

NHTSA · Stati Uniti21 mag 198585V068000Anni modello 1985Mostrato in inglese originale · traduzione in attesaVedi dettagli →
Capri II · 1979–1986
Capri II · 1979–1986
RichiamoModeratoMotoreNA

Richiamo

Carburetor throttle shafts may be susceptible to dirt contamination and wear of the bearing coatings. This could cause the secondary throttle plates to remain partially open after the driver has released the accelerator pedal. This this were to occur, engine speed would not return to idle potentially affecting vehicle control and stopping distances.

Transport Canada28 set 19841984117Anni modello 1984Mostrato in inglese originale · traduzione in attesaVedi dettagli →
Capri II · 1979–1986
RichiamoModeratoAbitacoloNA

Seat belts:Front:Anchorage

The bolts that attach the d-shaped ring for the shoulder belt are inadequately supported by the material in which they are mounted. The attachment does not comply with the requirements of federal motor vehicle safety standard no. 210, "seat belt assembly anchorages".

NHTSA · Stati Uniti20 dic 198383V134000Anni modello 1984Mostrato in inglese originale · traduzione in attesaVedi dettagli →
Capri II · 1979–1986
RichiamoModeratoAbitacoloNA

Richiamo

The upper torso restraint d-ring which attaches the shoulder belt to the b pillar, under certain test conditions, separated from its anchorage, and may not comply with cmvss 210 - belt anchorage.

Transport Canada17 dic 19831983114Anni modello 1984Mostrato in inglese originale · traduzione in attesaVedi dettagli →
Capri II · 1979–1986
RichiamoModeratoCarrozzeriaNA

Richiamo

Some of the vehciles affected by the recall may have been produced with incorrect hoods - the incorrect hoods were intended for use with conventional (non-turbo) engines and maynot provide a sufficient clearnace between the throttle linkage and the hood undersides. As a result, under certain conditions, the throttle linkage may come in contact with the hood potentially causing damage to the linkage and preventing the throttle from returning to its idle position.

Transport Canada21 ott 19831983088Anni modello 1983Mostrato in inglese originale · traduzione in attesaVedi dettagli →
Capri II · 1979–1986
RichiamoModeratoCarrozzeriaNA

Structure:Body:Hood

Inadequate clearance between the underside of the hood and the throttle linkage could damage the linkage and prevent the throttle from returning to idle position. This condition is due to installation of the incorrect hood style during vehicle assembly.

NHTSA · Stati Uniti21 ott 198383V110000Anni modello 1983Mostrato in inglese originale · traduzione in attesaVedi dettagli →
Capri II · 1979–1986
RichiamoModeratoAbitacoloNA

Richiamo

These vehicles do not comply with cmvss 209 - seat belt assemblies.

Transport Canada20 dic 19821982102Anni modello 1980–1981Mostrato in inglese originale · traduzione in attesaVedi dettagli →
Capri II · 1979–1986
RichiamoModeratoAbitacoloNA

Seats:Front assembly:Recliner

The housing plates on the driver seat back latch recliner assemblies were manufactured with substandard material products. This tainted steel was used to produce seatback latches for both the right and left side seat assemblies. Under certain conditions, the defective housing plates may distort, allowing the locking teeth to disengage and tear off. This permits the seatback to pivot backwards.

NHTSA · Stati Uniti8 set 198181V102000Anni modello 1981Mostrato in inglese originale · traduzione in attesaVedi dettagli →
Capri II · 1979–1986
RichiamoModeratoAbitacoloNA

Richiamo

Vehicles produced at dearborn assembly plant. Vehicles may have been equipped with driver seat back latch recliner assemblies that contain housing plates manufactured from suspect steel material. Under certain types of driver induced seat loading the recliner mechanism housing plates might distort allowing the locking teeth to disengage. This would allow the seat back to rotate rearward into a reclined position.

Transport Canada4 set 19811981092Anni modello 1981Mostrato in inglese originale · traduzione in attesaVedi dettagli →
Capri II · 1979–1986
RichiamoModeratoCambioNA

Richiamo

Vehicles equipped with turbocharged 2.3l engines and manual transmissions. Vehicles may have been built without a particular electric curcuit in the idle tracking system wiring harness. This condition may cause exhaust emissions of hydrocarbon (hc) and carbon monoxide (co) gases to exceed the limits specified by canada motor vehicle safety standard 1103 - exhaust emissions.

Transport Canada7 mag 19801980073Anni modello 1980Mostrato in inglese originale · traduzione in attesaVedi dettagli →
Capri II · 1979–1986
RichiamoModeratoMotoreNA

Emissions

During the railcar chain-down operation or during in-transit railcar movement, the chain could interfere with and break the evaporative emission carbon canister. These vehicles would then not comply with canada motor vehicle safety standard 1105 - evaporative emissions.

Transport Canada6 nov 19791979182Anni modello 1980Mostrato in inglese originale · traduzione in attesaVedi dettagli →
Capri II · 1979–1986
RichiamoLieveMotoreNA

Emissioni

Nota: veicoli con motori da 3,8 litri. Questi veicoli potrebbero non essere conformi alla norma C.M.V.S.S. 1103 - emissioni di gas di scarico. Il materiale di supporto nei catalizzatori può vibrare e sgretolarsi durante il normale utilizzo, facendo sì che le emissioni di gas di scarico superino i limiti previsti dalla norma. Correzione: i veicoli saranno ispezionati e il catalizzatore sarà sostituito ove necessario.

Transport Canada21 ago 19921992098Anni modello 1986Tradotto automaticamente · originale: ingleseVedi dettagli →
Capri II · 1979–1986
RichiamoLieveMotoreNA

Emissioni

Alcune Mustang 2.3 litri del 1987-89, Mustang e Capri 5.0 litri HO del 1986 e Mustang e Mark VII 5.0 litri HO del 1987-89. Questi veicoli potrebbero non essere conformi alla norma C.M.V.S.S. 1103 - emissioni di gas di scarico. Il substrato del catalizzatore può vibrare e disgregarsi durante il normale utilizzo, causando emissioni di gas di scarico superiori ai limiti previsti dalla norma. Correzione: il catalizzatore verrà sostituito ove necessario.

Transport Canada20 ago 19921992097Anni modello 1986Tradotto automaticamente · originale: ingleseVedi dettagli →

Fonti: NHTSA (Stati Uniti, pubblico dominio), Transport Canada (Open Government Licence – Canada), DVSA (Regno Unito, Open Government Licence v3.0), RappelConso e Safety Gate UE (Francia, Licence Ouverte 2.0), MLIT (Giappone, Public Data License 1.0) e MOLIT (Corea del Sud, car.go.kr).