BMW of North America, LLC (BMW) is recalling certain model year 2014-2015 MINI Cooper Hardtop 2 Door, and Cooper S Hardtop 2 Door vehicles manufactured January 6, 2014, to October 17, 2014. During service appointments, dealers may have inadvertently reprogrammed the transmission control unit with software that may allow drivers to exit the vehicle when the transmission is not in Park. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) No. 114, "Theft Protection and Rollaway Prevention."
NHTSA · Stati Uniti15 dic 201414V789000Anni modello 2014–2015Mostrato in inglese originale · traduzione in attesaVedi dettagli →
Certain vehicles may fail to conform to Canada Motor Vehicle Safety Standard (CMVSS) 114 - Theft Protection and Rollaway Prevention. During service appointments with dealers, the automatic transmission control unit may have been inadvertently programmed with software that does not conform to the standard. As a result, drivers could exit the vehicle and may not realize that the vehicle's transmission is not in the PARK position. If this were to occur without the parking brake applied, the vehicle could roll away, which could result in a crash causing injury and/or damage to property. Correction: Dealers will reprogram the automatic transmission control unit software.
Transport Canada11 dic 20142014561Anni modello 2014–2015Mostrato in inglese originale · traduzione in attesaVedi dettagli →
On certain vehicles equipped with a constant velocity transmission (CVT), the connection between the transmission gear selector rod and the lock plate may not have been laser-welded correctly. If the weld were to break, the gear currently engaged would remain in position. It would no longer be possible to shift transmission gear positions using the selector lever. The display for the transmission in the instrument cluster may then show a gear position that does not correspond to the actual gear position of the transmission. The potential exists for the vehicle to pull away from stop in the opposition direction to that desired, or if the vehicle was parked on an incline of sufficient grade, and the parking brake was not engaged, this could result in a vehicle rollaway condition. Correction: Dealers will inspect the transmission gear selector rod to lock plate weld and, if necessary, will replace the CVT transmission.
Transport Canada16 gen 20062006013Anni modello 2006Mostrato in inglese originale · traduzione in attesaVedi dettagli →
On certain vehicles equipped with manual transmissions, the shift cable could detach from the transmission shift linkage while the driver is attempting to change gears. If the transmission moves into neutral and remains there, the ability to accelerate or maintain speed will be lost, increasing the risk of a crash. Correction: Dealers will inspect the shift cable and, if necessary, install a retaining clip over the end of the shift cable to prevent it from detaching from the transmission.
Transport Canada25 lug 20022002144Anni modello 2002Mostrato in inglese originale · traduzione in attesaVedi dettagli →
On certain passenger vehicles equipped with manual transmissions, the transmission shift cable connects the gearshift lever in the vehicle interior to the shift linkage on the transmission. It is possible for the shift cable to detach from the transmission shift linkage while the driver is attempting to change gears. If the cable detaches from the shift linkage, gear changes will no longer be possible and the transmission will remain in the last gear selected.
NHTSA · Stati Uniti25 lug 200202V201000Anni modello 2002Mostrato in inglese originale · traduzione in attesaVedi dettagli →
Fonti: NHTSA (Stati Uniti, pubblico dominio), Transport Canada (Open Government Licence – Canada), DVSA (Regno Unito, Open Government Licence v3.0), RappelConso e Safety Gate UE (Francia, Licence Ouverte 2.0), MLIT (Giappone, Public Data License 1.0) e MOLIT (Corea del Sud, car.go.kr).