I bollettini tecnici (TSB) sono istruzioni di riparazione che i costruttori inviano ai concessionari su problemi noti. Non sono richiami di sicurezza, ma spesso confermano un difetto.
"subaru has determined that affected vehicles equipped with optional genuine subaru puddle lights may develop a short circuit and cause the related components to overheat and potentially melt. A short circuit can develop when either the puddle lights or connectors are exposed to an electrolytic moisture source (i.E.- salt water) and it penetrates the circuit board of the puddle light or the pins of the puddle light connector(s). If the puddle lights or connectors were to overheat, they could melt and pose a risk of a fire. This recall will involve vehicle inspection and installation of inline fuses as necessary."
NHTSA · bollettino del costruttore10083646Anni modello 2012Mostrato in inglese originale · traduzione in attesaVedi dettagli →
Subaru has determined that affected vehicles equipped with optional genuine subaru puddle lights may develop a short circuit and cause the related components to overheat and potentially melt. A short circuit can develop when either the puddle lights or their connectors are exposed to an electrolytic moisture source (i.E. Salt water) and it penetrates the circuit board of the puddle light or the pins of the puddle light connector(s). If the puddle lights or connectors were to overheat, they could melt and pose a risk of a fire. To correct this condition, dealers will inspect and, if necessary, repair the puddle lights. As a precautionary measure, it will be necessary to add in-line fuses for both the left and right side puddle lights to those vehicles that do not already have fuses contained in the wire harnesses.
NHTSA · bollettino del costruttore10080094Anni modello 2012Mostrato in inglese originale · traduzione in attesaVedi dettagli →
SUBARU OF AMERICA, INC. ha determinato che un difetto, relativo alla sicurezza dei veicoli a motore, esiste in alcuni veicoli Subaru elencati, equipaggiati con un airbag frontale frontale dal lato passeggero non disidratato proveniente da Takata contenente il propellente Nitrato di Ammonio Stabilizzato in Fase (solo per alcuni veicoli specifici).
NHTSA · bollettino del costruttore10248224Anni modello 2012Tradotto automaticamente · originale: ingleseVedi dettagli →
This bulletin announces a revised replacement procedure for installation of the front crankshaft oil seal. Includes all 2011MY+ vehicles with FA or FB Engines.
NHTSA · bollettino del costruttore10179379Anni modello 2011Mostrato in inglese originale · traduzione in attesaVedi dettagli →
SUBARU OF AMERICA, INC. has determined that a defect, which relates to motor vehicle safety, exists in certain Subaru vehicles listed above, equipped with a non-desiccated Takata-sourced passenger side frontal airbag containing the propellant Phase Stabilized Ammonium Nitrate (PSAN).
NHTSA · bollettino del costruttore10160503Anni modello 2012Mostrato in inglese originale · traduzione in attesaVedi dettagli →
SUBARU OF AMERICA, INC. has determined that a defect, which relates to motor vehicle safety, exists in certain Subaru vehicles listed above, equipped with a non-desiccated Takata-sourced passenger side frontal airbag containing the propellant Phase Stabilized Ammonium Nitrate (PSAN).
NHTSA · bollettino del costruttore10160205Anni modello 2012Mostrato in inglese originale · traduzione in attesaVedi dettagli →
SUBARU OF AMERICA, INC. has determined that a defect, which relates to motor vehicle safety, exists in certain Subaru vehicles listed above, equipped with a non-desiccated Takata-sourced passenger side frontal airbag containing the propellant Phase Stabilized Ammonium Nitrate (PSAN). This phase of the Takata recall expansion includes all remaining vehicles equipped with a non-desciccated Takata-sourced passenger side frontal air bag containing the propellant PSAN. Recall Codes TKA-19-TKB-19-TKC-19
NHTSA · bollettino del costruttore10154411Anni modello 2012Mostrato in inglese originale · traduzione in attesaVedi dettagli →
This Service Information bulletin announces instruction for application of additional lubrication between the brake caliper support and pad clips. This will prevent the pad from dragging due to corrosion buildup which may result in uneven or premature wear of the replacement brake pads. This additional instruction applies to all models with brake pads using the upper and lower pad clips and has been added to the brake pad installation procedures found in the related Service Manuals.
NHTSA · bollettino del costruttore10154419Anni modello 2012Mostrato in inglese originale · traduzione in attesaVedi dettagli →
"this service information bulletin announces a design change to the oil pressure switch assembly. Nickel plating has been applied to the internal switch contacts to enhance their durability and reduce the possibility of poor contact which could affect operation or cause improper illumination of the oil pressure warning lamp. A small pilot portion was added to the threaded area on p.N. 25240ka051 as shown in the illustration below."
NHTSA · bollettino del costruttore10093067Anni modello 2012Mostrato in inglese originale · traduzione in attesaVedi dettagli →
If you encounter a vehicle that has the oil temperature warning lamp flashing with p0751, p0756, p0761, p0766, p0771, p1840, p1841, p1842, p1843 or p1844 stored in memory and possibly an intermittent stalling condition, it may be the result of contamination in the valve body. Instead of replacing the valve body, flush the transmission and perform the dynamic check mode procedure.
NHTSA · bollettino del costruttore10067834Anni modello 2012Mostrato in inglese originale · traduzione in attesaVedi dettagli →
The purpose of this bulletin is to provide a description of current changes to Service Manuals available via the Subaru Technical Information System (STIS) web site.
NHTSA · bollettino del costruttore10199932Anni modello 2012Mostrato in inglese originale · traduzione in attesaVedi dettagli →
This bulletin announces availability of new front wheel hub assemblies incorporating bearing surfaces having increased resistance to imperfections resulting from shock loads.
NHTSA · bollettino del costruttore10188201Anni modello 2012Mostrato in inglese originale · traduzione in attesaVedi dettagli →
Fonti: NHTSA (Stati Uniti, pubblico dominio), Transport Canada (Open Government Licence – Canada), DVSA (Regno Unito, Open Government Licence v3.0), RappelConso e Safety Gate UE (Francia, Licence Ouverte 2.0), MLIT (Giappone, Public Data License 1.0) e MOLIT (Corea del Sud, car.go.kr).