技術通報
この保留サービスソリューション(PSS)では、MILが点灯している場合に、技術者がPSSデータベースに記録を登録することを求めています。対象は、Evalリーク検知ポンプ回路、DTC240700です。
🔔 無料アカウントを作成して Audi Q3 (すべての世代) のメール通知を受け取る
技術サービス通報(TSB)は、既知の不具合についてメーカーが販売店に送る修理指示です。安全リコールではありませんが、不具合の裏付けになることがよくあります。
この保留サービスソリューション(PSS)では、MILが点灯している場合に、技術者がPSSデータベースに記録を登録することを求めています。対象は、Evalリーク検知ポンプ回路、DTC240700です。
This bulletin provides information when the MIL is on, DTC P240700 present; Leak Detenction Pump curent fluctuating.
This bulletin provides information when the MIL is on, DTC P240700 present; Leak Detenction Pump curent fluctuating.
This bulletin provides information when the MIL is on, DTC P240700 Leak Detection Pump Current Fluctuating,
リフト上点検セクション: 取り外し 「ELSAで冷却水リザーバーキャップの圧力試験を実施する -> VIN番号を入力 -> 修理マニュアル Engine -> 4-Cylinder Direct Injection 1.8L; 2.0L 4V TFSI Engine (Generation III) -> 19 Cooling System -> Coolant System/Coolant -> Cooling System, Checking for Leaks -> Pressure Relief Valve in Cap, Checking」。文書「Cooling System, Checking for Leaks」では、手順「Pressure Relief Valve in Cap, Checking」のみを実施すること。
"settings section: Added: Load onboard video tutorials from sd card requirements: 1 sd card at least 2gb in size. 1. Website: Download installation content from http:// www.Audiiqs.Com/. Select in-car video tutorials from the main screen. Choose 2017 and select download tutorial for the 2017 q3. Refer to the file extraction document for instructions to copy data to sd card. 2. Car: Load onboard video tutorials> turn ignition on> insert the created sd card for 2017 q3 into sd1 slot> select the car function button. System will initialize> select the owners man. Function by selecting the upper right control button> select yes> select sd1> select start update> turn off ignition to start update (the update will take approx. 5 minutes)> once completed, remove the sd card and store to be used again for the next vehicle."
"settings section: Added: Load onboard video tutorials from sd card requirements: 1 sd card at least 2gb in size. 1. Website: Download installation content from http:// www.Audiiqs.Com/. Select in-car video tutorials from the main screen. Choose 2017 and select download tutorial for the 2017 q3. Refer to the file extraction document for instructions to copy data to sd card. 2. Car: Load onboard video tutorials> turn ignition on> insert the created sd card for 2017 q3 into sd1 slot> select the car function button. System will initialize> select the owners man. Function by selecting the upper right control button> select yes> select sd1> select start update> turn off ignition to start update (the update will take approx. 5 minutes)> once completed, remove the sd card and store to be used again for the next vehicle."
This Repair Authorization requests that technicians supply technical information in instances where the fuel gauge is not reading correctly.
OIL CHART SECTION: CHANGED - Castrol Oil to 'Audi approved XXXX-Refer to the Parts Catalog' for all models.
OIL CHART SECTION: CHANGED - Castrol Oil to 'Audi approved XXXX-Refer to the Parts Catalog' for all models.
OIL CHART SECTION: Changed oil viscosities: 502.00 - Castrol EDGE Professional 5W-40 and 504.00 / (507.00 Diesel) - Castrol EDGE Professional 0W-30 LL03 (Updated from 5W-30) TTRS
Oil Capacity Table: Changed Oil Specs for all models
Oil Capacity Table: Changed Oil Specs for all models
Added Oil Capacity Chart at the end of the document.
Added Oil Capacity Chart at the end of the document.
Major Maintenance Section: ADDED: "(except A3 e-tron)" at the end of "Cooling system - Check coolant level, add coolant if necessary, and check protection to spec -25C"
Oil Capacity Table: For A3 B-Cycle 2.0 TFSI engine: Changed oil spec from 508/509** Castrol EDGE Professional 5W40 to 508/509** Castrol EDGE Professional 0W20 Long Life IV
Spark Plugs: replace at 55,000 miles (85,000 km) or 6 years, whichever occurs first. Thereafter, every 60,000 miles (90,000 km) or 6 years, whichever occurs first Added: 2.0L TFSI (Q3) For 35/75/115 Mile Spark Plug interval: Added Q3 to exclusion of Flex Fuel Engines.
This document contains the Audi maintenance schedule. The intervals shown in this table are based on vehicles operating under normal conditions. In case of severe conditions, such as extremely low temperatures, excessive dust, etc., it is necessary for certain operations to be carried out in between the given intervals. This applies particularly to engine oil changes and the cleaning or replacing of the air cleaner filter element.
This document contains the Audi maintenance schedule. First standard maintenance service at 5,000 miles or 1 year after delivery, whichever occurs first. Standard maintenance services thereafter occur at intervals of 10,000 miles or 1 year after the last standard maintenance service, whichever occurs first. First major maintenance service at 15,000 miles or 2 years after delivery, whichever occurs first. Major maintenance services thereafter occur at intervals of 20,000 miles or 2 years after the last major maintenance service, whichever occurs first. The intervals shown in this table are based on vehicles operating under normal conditions. In case of severe conditions, such as extremely low temperatures, excessive dust, etc., it is necessary for certain operations to be carried out in between the given intervals. This applies particularly to engine oil changes and the cleaning or replacing of the air cleaner filter element.
This document contains the Audi maintenance schedule. First standard maintenance service at 5,000 miles or 1 year after delivery, whichever occurs first. Standard maintenance services thereafter occur at intervals of 10,000 miles or 1 year after the last standard maintenance service, whichever occurs first. First major maintenance service at 15,000 miles or 2 years after delivery, whichever occurs first. Major maintenance services thereafter occur at intervals of 20,000 miles or 2 years after the last major maintenance service, whichever occurs first. The intervals shown in this table are based on vehicles operating under normal conditions. In case of severe conditions, such as extremely low temperatures, excessive dust, etc., it is necessary for certain operations to be carried out in between the given intervals. This applies particularly to engine oil changes and the cleaning or replacing of the air cleaner filter element.
This document contains the communication to dealerships on the upcoming Update 90i7. Update programming to provide a warning (yellow indicator) when the oil level is at the minimum required level prior to the warning (red indicator) when the oil is below the minimum required level.
The MIL is on. "Coolant System: Fault Turn Off Engine" and the coolant symbol appears in the information panel. DTC P1B1C00 is stored in the ECM.
Fuel Filter ? replace: Added A3 2.0L TDI
Change oil viscosities for a3, a4, s4, a4 allroad, a6, a7, a8l, q5, q7, r8 coupe; remove a4 tdi, a5 tdi, rs3, rs4, rs6, rs6 plus from maintenance items. Added "(includes minor maintenance service)" to standard maintenance service section title. Remove r8 from the following list item: "rear spoiler hinges: Lubricate according to description in elsapro" "added the following maintenance interval: ""perform first at 20,000 miles or 6 years, whichever occurs first. Thereafter, every 20,000 miles or 6 years, whichever occurs first. Spark plugs - replace (rs7 performance only)"" corrected hp for the following vehicles: A4, s4, q7, r8; added a3, s3, a3 e-tron, a4 allroad, a4 sedan, a4 b-cycle, a5, s5, a6, s6, a7, s7, rs7, rs7 performance, a8, a8l, s8, q3, q5, q5 hybrid, sq5, tt, tts, tt roadster vehicles to oil capacity list
出典:NHTSA(米国、パブリックドメイン)、カナダ運輸省(Open Government Licence – Canada)、DVSA(英国、Open Government Licence v3.0)、RappelConso および EU Safety Gate(フランス、Licence Ouverte 2.0)、国土交通省(日本、公共データ利用規約1.0)、韓国国土交通部(car.go.kr)。