閲覧無料 · 投稿は無料アカウントでAnticars(2000年)の後継

BMW 7シリーズ E65

2001–2008 · 不具合12件 · 3市場

技術サービス通報(TSB)は、既知の不具合についてメーカーが販売店に送る修理指示です。安全リコールではありませんが、不具合の裏付けになることがよくあります。

技術通報重大サスペンションNA

技術通報

0Replacement of Steering Gear Due to Accident Damage. INFORMATION The steering gear does NOT have to be replaced if: ? There is no visible damage to front axle parts such as spring struts, hubs or spindles, control arms or wishbones, thrust or tension rods or stabilizers performing a locating function, steering drop arms or Pitman arms, track rods or drag links, tie rods, front axle subframe, steering column, and attachment points for suspension components to body. ? There is no binding or increase in turning effort when operating the steering gear from lock to lock with engine off. ? The impact has not caused the wheel alignment to become not adjustable within specified tolerances using normal adjustment procedures. The steering gear MUST be replaced if: ? There is visible damage to the steering gear, including blackening or discoloration of the housing from fire damage. ? Electric steering gear (EPS) version: Examine the control unit with all plug connections for damage and hairline cracks. ? There is any permanent deformation or cracks on: ? Wheel rims in the event of a negative result from the wheel/axle alignment check ? Spring struts, steering stubs, wheel carriers ? Wishbones ? Struts, trailing links or the anti-roll bar with this function ? Body side screwing/attachment points for wheel guide control components ? Front axle support ? Pitman arms https://www.minitis.net/tiscode/cgi-bin/bulletin.aspx?sie_path=/tsb/bulletins/htm_store/21101.1.M320405....3/2/2015 Page 2 of 2 ? Tie rods ? Steering box fixtures ? Steering column The steering column MUST be replaced if visibly damaged, deformed or broken. If a recommended replacement with the criteria described above is refused by the customer or insurance company, this should be noted in the repair order and signed by the refusing party.

NHTSA · メーカー通報10147112原文(英語)で表示中 · 翻訳待ち詳細を見る →
技術通報重大電装NA

技術通報

Bmw: See document search button for owner letter. On certain model year 2008-2011 vehicles, a defect involving the electric auxiliary water pump can over heat or fail to cool engine and fire may occur in vehicle or engine compartment. *pe

NHTSA · メーカー通報10044281モデルイヤー 2008原文(英語)で表示中 · 翻訳待ち詳細を見る →
技術通報中程度エンジンNA

技術通報

Engine will crank, but no start.

NHTSA · メーカー通報10236386原文(英語)で表示中 · 翻訳待ち詳細を見る →
技術通報中程度ブレーキNA

技術通報

Brake pad/disc.

NHTSA · メーカー通報10236388原文(英語)で表示中 · 翻訳待ち詳細を見る →
技術通報中程度サスペンションNA

技術通報

Vehicle cannot be opened or closed using comfort access, engine start is not possible, and the vehicle may not start when placing the key against the steering column. Note: Opening, closing and starting via the BMW Digital Key or the Digital Key Card are not affected.

NHTSA · メーカー通報10218384原文(英語)で表示中 · 翻訳待ち詳細を見る →
技術通報中程度その他NA

技術通報

もしBN2000モーターサイクルに接続する際、次のいずれかの状況が発生することがあります: 1. ISTAで読み出しを行うと、搭載されている制御ユニットが見つからない。バスの概要および制御ユニットリストでは、すべての制御ユニットが黄色で表示される(制御ユニットが自己識別しない)。故障メモリに車両との通信障害に関するエントリが表示される。 2. 車両に接続した直後は制御ユニットと通信できるが、その後通信が停止する。 Wait, "If" is wrong grammar; I should fix the opening. Corrected: 次のいずれかの状況が、BN2000モーターサイクルへの接続時に発生することがあります: 1. ISTAで読み出しを行うと、搭載されている制御ユニットが見つからない。バスの概要および制御ユニットリストでは、すべての制御ユニットが黄色で表示される(制御ユニットが自己識別しない)。故障メモリに、車両との通信障害に関するエントリが表示される。 2. 車両への接続後、当初は制御ユニットと通信できるが、その後通信が停止する。

NHTSA · メーカー通報10200253自動翻訳 · 原文:英語詳細を見る →
技術通報中程度その他NA

技術通報

ISTAで読み出しを行った際、取り付けられているコントロールユニットが検出されない。

NHTSA · メーカー通報10194313自動翻訳 · 原文:英語詳細を見る →
技術通報中程度エンジンNA

技術通報

Oil leak at the sealing surface between the oil sump and engine housing.

NHTSA · メーカー通報10190875原文(英語)で表示中 · 翻訳待ち詳細を見る →
技術通報中程度その他NA

技術通報

The installed control units cannot be found when reading out with IST

NHTSA · メーカー通報10190873原文(英語)で表示中 · 翻訳待ち詳細を見る →
技術通報中程度エンジンNA

技術通報

Over the course of quality monitoring, BMW Motorrad has discovered that on F750- and F850-models the air filter element might have been installed incorrectly. The intake air may not be filtered enough, which would lead to increased wear of the engine.

NHTSA · メーカー通報10159161原文(英語)で表示中 · 翻訳待ち詳細を見る →
技術通報中程度その他NA

技術通報

Fork Leg Leaking

NHTSA · メーカー通報10152366原文(英語)で表示中 · 翻訳待ち詳細を見る →
技術通報中程度エンジンNA

技術通報

End cap in the cylinder head is leaking oil. Installation error.

NHTSA · メーカー通報10151063原文(英語)で表示中 · 翻訳待ち詳細を見る →
技術通報中程度その他NA

技術通報

BMW Parts Bulletin TEC6S Screw Return BMW AG has requested the return of the following part number: 18 30 7 639 098 Stock should not be sold or installed on any vehicle. Please return the part(s) to your facing Regional Distribution Center (RDC). Submit for return using a YR26 damage claim with order reason BM2. A valid BMW delivery and delivery item number must be entered, and TEC6S must appear in the text of your TEC claim. TEC6S is valid from May 30, 2013, through June 13, 2013.The deadline for filing a claim under TEC6S is June 13, 2013. All parts must be returned to your facing RDC no later than June 27, 2013. Please refer to the ETK with a VIN and order the correct part number as needed. (c) 2013, BMW of North America, LLC. The contents of this document are confidential and should not be shared with third parties for distribution.

NHTSA · メーカー通報10150082原文(英語)で表示中 · 翻訳待ち詳細を見る →
技術通報中程度その他NA

技術通報

BMW AG has requested a return of the following part number: 36 10 6 856 227 Stock should not be sold or installed on any vehicle. Please return the part(s) to your facing Regional Distribution Center (RDC). Submit for return using a YR26 damage claim with order reason BM2. A valid BMW delivery and delivery item number must be entered, and TEC2T must appear in the text of your TEC claim

NHTSA · メーカー通報10150081原文(英語)で表示中 · 翻訳待ち詳細を見る →
技術通報中程度その他NA

技術通報

BMW Parts Bulletin TEC7S Floor Mat Return BMW AG has requested the return of the following part number: 51 47 2 166 147 Stock should not be sold or installed on any vehicle. Please return the part(s) to your facing Regional Distribution Center (RDC). Submit for return using a YR26 damage claim with order reason BM2. A valid BMW delivery and delivery item number must be entered, and TEC7S must appear in the text of your TEC claim. TEC7S is valid from May 30, 2013, through June 13, 2013.The deadline for filing a claim under TEC7S is June 13, 2013. All parts must be returned to your facing RDC no later than June 27, 2013. Please re-order the same part number as needed. (c) 2013, BMW of North America, LLC. The contents of this document are confidential and should not be shared with third parties for distribution.

NHTSA · メーカー通報10150083原文(英語)で表示中 · 翻訳待ち詳細を見る →
技術通報中程度電装NA

技術通報

BMW Parts Bulletin TEC1T RDC Module Return BMW NA has requested the inspection of the following part numbers: 36 10 6 856 227 and 36 10 6 798 872 Stock should not be sold or installed on any vehicle. Please return the part(s) to your facing Regional Distribution Center (RDC). Submit for return using a YR26 damage claim with order reason BM2. A valid BMW delivery and delivery item number must be entered, and TEC1T must appear in the text of your TEC claim. TEC1T is valid from May 30, 2013, through June 13, 2013.The deadline for filing a claim under TEC1T is June 13, 2013. All parts must be returned to your facing RDC no later than June 27, 2013. Part number 36 10 6 856 227: All parts with an index of 02 and older must be returned. All parts with an index of 03 are correct. Part number 36 10 6 798 872: All parts with an index of 03 and older must be returned. All parts with an index of 04 are correct. The Index is the two digit code under the bar code located on the box label. The Index can also be found on the part itself just after the part number. Please re-order the same part number as needed. (c) 2013, BMW of North America, LLC. The contents of this document are confidential and should not be shared with third parties for distribution.

NHTSA · メーカー通報10150084原文(英語)で表示中 · 翻訳待ち詳細を見る →
技術通報中程度サスペンションNA

技術通報

At MlNl,we are committed to maintaining a level of automotive and service excellence that exceeds your expectation now and in the future. Consistent with this philosophy, we want to help you avoid problems and minimize your in convenience. This letter addresses an issue involving the power-assist steering pump and associated pump cooling fan on certain model year 2002-2005 Mini Cooper and Mini Cooper S Models. We are extending the warranty coverage for the power assist steering pump and associated cooling fan on yoiur vehicle to 13 years / 150000 miles, whichever comes first.

NHTSA · メーカー通報10150085原文(英語)で表示中 · 翻訳待ち詳細を見る →
技術通報中程度その他NA

技術通報

BMW Parts Bulletin TEC8S Floor Mat Return BMW AG has requested the return of the following part number: 51 47 2 166 151 Stock should not be sold or installed on any vehicle. Please return the part(s) to your facing Regional Distribution Center (RDC). Submit for return using a YR26 damage claim with order reason BM2. A valid BMW delivery and delivery item number must be entered, and TEC8S must appear in the text of your TEC claim. TEC8S is valid from May 30, 2013, through June 13, 2013.The deadline for filing a claim under TEC8S is June 13, 2013. All parts must be returned to your facing RDC no later than June 27, 2013. Please re-order the same part number as needed. (c) 2013, BMW of North America, LLC. The contents of this document are confidential and should not be shared with third parties for distribution.

NHTSA · メーカー通報10150079原文(英語)で表示中 · 翻訳待ち詳細を見る →
技術通報中程度その他NA

技術通報

BMW AG has requested a return of the following part number: 36 11 1 509 164 Stock should not be sold or installed on any vehicle. Please return the part(s) to your facing Regional Distribution Center (RDC). Submit for return using a YR26 damage claim with order reason BM2. A valid BMW delivery and delivery item number must be entered, and TEC9S must appear in the text of your TEC claim.

NHTSA · メーカー通報10150080原文(英語)で表示中 · 翻訳待ち詳細を見る →
技術通報中程度サスペンションNA

技術通報

High-pressure Direct Injection Fuel System Repairs. INFORMATION Failure to follow the repair procedures, including the use of the special tools and correct torque specifications during the removal, installation and/or replacement of the high-pressure fuel system components, can result in damage to the high-pressure fuel lines, high-pressure fuel injectors, high-pressure pump and the cylinder head. The use of aftermarket slide hammers and pry bar-type tools is not allowed when removing and installing or replacing these components. Using tools that abruptly shock the injector housing to remove the injector from the cylinder head can lead to failures of the cylinder head and/or the injector itself. The use of power or pneumatic tools is not allowed when removing and installing or replacing these components. Always refer to the proper ISTA/D repair instruction for the approved tools and procedures applicable to the vehicle in the work shop.

NHTSA · メーカー通報10149588原文(英語)で表示中 · 翻訳待ち詳細を見る →
技術通報中程度内装NA

技術通報

BMW Parts Bulletin TEC142 Airbag Return BMW AG has requested the return of the following part numbers: 72 12 9 394 543 (E46 Passenger Air Bag Interim) 72 12 9 394 542, 72 12 7 112 351, 72 12 7 112 351, 72 12 9 384 807, 72 12 9 330 942, 72 12 7 065 920 Stock should not be sold or installed on any vehicle. Recall SIBs (B65 15 13, B65 17 14) are currently being updated. Please reorder the new final remedy part number 72 12 6 998 949 immediately so there is no lack of availability for E46 Passenger air bag repairs. If you plan on ordering more than 20 pcs a month, please order 45 pcs on one line (1 pallet of 45). For accident vehicles not affected by an open recall, please refer to EPC with VIN for replacement part number. Concerned are all parts delivered and shipped so far. Please return all part(s) to your facing Regional Distribution Center (RDC). Submit for return using a YR26 damage claim with order reason BM2. A valid BMW delivery and delivery item number must be entered, and TEC142 must appear in the text of your TEC claim. TEC142 is valid from October 31, 2018, through November 14, 2018. The deadline for filing a claim under TEC142 is November 14, 2018. All parts must be returned to your facing RDC no later than November 28, 2018. When submitting a return claim, please specify in the comment section if the part is in its original factory seal or if it was previously opened. (c) 2018, BMW of North America, LLC. The contents of this document are confidential and should not be shared with third parties for distribution.

NHTSA · メーカー通報10149563原文(英語)で表示中 · 翻訳待ち詳細を見る →
技術通報中程度内装NA

技術通報

BMW Parts Bulletin TEC141 Seat Pad Return BMW AG has requested the return of the following part numbers: 52 10 7 478 172, 52 10 7 478 175, 52 10 7 478 176 52 10 7 478 177, 52 10 7 478 178, 52 10 7 478 180 Stock should not be sold or installed on any vehicle. Concerned are all parts delivered and shipped so far.

NHTSA · メーカー通報10149562原文(英語)で表示中 · 翻訳待ち詳細を見る →
技術通報中程度電装NA

技術通報

CLOSED-CIRCUIT CURRENT MONITORING. Increased closed-circuit currents may occur permanently or intermittently and cause the battery to discharge prematurely. The increase in closed-circuit current may be caused by a faulty control module or by the installation of a non-approved accessory. In a situation where a vehicle has broken down due to a discharged battery, for diagnostic purposes it is important not to disconnect the battery. This is because a control module will be reset if the battery is disconnected. Following a reset, the faulty control module may start functioning correctly again, making accurate diagnosis impossible. To correctly measure closed-circuit current, the 50-amp or 100-amp clip-on probe can be used in conjunction with the IMIB (Integrated Measurement Interface Box) to properly diagnose closed-circuit current problems over an extended period of time.

NHTSA · メーカー通報10149555原文(英語)で表示中 · 翻訳待ち詳細を見る →
技術通報中程度エンジンNA

技術通報

Delivery Stop: 2013 3 Series Emissions Label. A Delivery Stop has been issued by BMW AG to correct the Vehicle Emissions Control Information (VECI) label. Affected are certain 2013 Model Year 3 Series vehicles with xDrive. Vehicles included in the attached chassis number list must not be delivered until the correct VECI label has been installed. Service and parts instructions will be provided as soon as the labels are available for ordering (estimate: 1 week).

NHTSA · メーカー通報10149497原文(英語)で表示中 · 翻訳待ち詳細を見る →
技術通報中程度電装NA

技術通報

2013 MINI JCW Paddle Shifter Retrofit. SZL to EGS harness installation. For necessary preliminary tasks, refer to ISTA and perform the following steps listed in this document.

NHTSA · メーカー通報10149498原文(英語)で表示中 · 翻訳待ち詳細を見る →
古いもの →

出典:NHTSA(米国、パブリックドメイン)、カナダ運輸省(Open Government Licence – Canada)、DVSA(英国、Open Government Licence v3.0)、RappelConso および EU Safety Gate(フランス、Licence Ouverte 2.0)、国土交通省(日本、公共データ利用規約1.0)、韓国国土交通部(car.go.kr)。