影響を受けた車両のセルモジュールは仕様通りに生産されておらず、それは...
影響を受けた車両のセルモジュールは仕様通りに製造されておらず、モジュールフレームの破損を引き起こす可能性があります。これにより高電圧システムの停止や火災が発生する可能性があります。
🔔 無料アカウントを作成して BMW i4 (すべての世代) のメール通知を受け取る
影響を受けた車両のセルモジュールは仕様通りに製造されておらず、モジュールフレームの破損を引き起こす可能性があります。これにより高電圧システムの停止や火災が発生する可能性があります。
スターター発電機の正極のバッテリーケーブルが正しく製造されていない可能性があります。これにより電気接続が緩み、過剰な接触抵抗が生じる可能性があります。車両は充電や始動ができません。スターター発電機の接点が過熱し、車両が火災を引き起こす可能性があります。
BMWオブノースアメリカLLC(BMW)は、2025年型I4 EDRIVE40車1台をリコールしています。ポジティブバッテリーケーブルとリアパワーディストリビューターの接続が緩む可能性があります。
The cell modules in the vehicles concerned were not produced in accordance with the specifications, which may cause the module frame to fail. This may lead to a shutdown of the high-voltage system and fire.
The positive battery cable of the starter-generator may not have been manufactured correctly. This could result in a loose electrical connection, leading to excessive contact resistance. The vehicle cannot charge or start. Contact points in the starter-generator could overheat and cause a vehicle fire.
BMW of North America, LLC (BMW) is recalling certain 2022-2025 i4, 2022-2024 IX, 2023-2024 I7, and 2024 I5 vehicles. The electric drive motor software may shut down the high-voltage system, causing a loss of drive power.
BMW of North America, LLC (BMW) is recalling certain 2022-2025 IX, 2023-2024 I7, and 2022-2023 i4 vehicles. The high-voltage battery cell modules may not have been assembled properly, resulting in stress on the module frame and possible module failure.
Due to incorrectly produced high-voltage cell modules, the cell terminal and the cell-contact system in the battery are not in contact anymore. When strong electricity is flowing, that may cause the cell to overheat and create a risk of fire.
BMW of North America, LLC (BMW) is recalling certain 2024 i4 xDrive40, i4 M50 and i5 eDrive40 vehicles. The high-voltage battery module may contain insufficient weld seams, which can result in the battery overheating.
高電圧バッテリーの製造上の欠陥は、バッテリーの故障を引き起こし、火災のリスクを高める可能性があります。
Les coussinets d’écrasement de la batterie haute tension peuvent ne pas avoir été assemblés. cela peut causer des dommages à la batterie haute tension en cas de collision latérale grave et peut entraîner un court-circuit augmentant le risque d’incendie.
배터리 셀 생산 공정 중에 손상된 음극판 조각이 배터리 셀 내부에 유입되어 고전압 배터리에 단락이 발생할 수 있으며, 이런 경우 셀 모듈이 방전될 수 있고, 화재가 발생할 수 있는 가능성에 따른 리콜
BMW of North America, LLC (BMW) is recalling certain 2022-2023 iX xDrive40, iX xDrive50, iX M60, i4 eDrive35, i4 eDrive40, i4 M50, and 2023 i7 xDrive60 vehicles. The high voltage battery electronic control unit (ECU) software may cause an interruption of electrical power.
高電圧バッテリーのセルモジュールの製造不良により、高電圧バッテリーが誤作動するおそれがある。そのため、稀にではあるが高電圧バッテリーが放電し、最悪の場合、火災につながる可能性がある。
배터리 셀 생산 공정 중에 손상된 음극판 조각이 배터리 셀 내부에 유입되어 고전압 배터리에 단락이 발생할 수 있고, 이로 인해 셀 모듈이 방전될 수 있으며 화재가 발생할 수 있는 가능성에 따른 리콜 <*대상차량별 생산일자> BMW i4 eDrive40: 2021.11.30~2022.07.15 BMW i4 M50: 2021.11.22~2022.06.08 BMW i7 xDrive60: 2022.08.04~2022.08.04 BMW iX M60: 2022.05.04~2022.05.09 BMW iX xDrive50: 2022.04.28~2022.06.01 ?
高電圧バッテリーのセルモジュールの製造不良により、高電圧バッテリーが誤作動するおそれがある。そのため、稀にではあるが高電圧バッテリーが放電し、最悪の場合、火災につながる可能性がある。
製造上の欠陥により高電圧バッテリーが故障し、火災のリスクが高まる可能性があります。
배터리 셀 생산 공정 중에 손상된 음극판 조각이 배터리 셀 내부에 유입되어 고전압 배터리에 단락이 발생할 수 있으며, 이런 경우 셀 모듈이 방전될 수 있고 화재가 발생할 수 있는 가능성에 따른 리콜 <*대상차량별 생산일자> BMW i4 eDrive40: 2022.02.10~2022.08.11 BMW i4 M50: 2022.04.25~2022.06.07 BMW i7 xDrive60: 2022.07.29 BMW iX xDrive50: 2021.09.20
高電圧バッテリーのセルモジュールの製造不良により、高電圧バッテリーが誤作動するおそれがある。そのため、稀にではあるが高電圧バッテリーが放電し、最悪の場合、火災につながる可能性がある。
배터리 셀 생산 공정 중에 손상된 음극판 조각이 배터리 셀 내부에 유입되어 고전압 배터리에 단락이 발생할 수 있으며, 이런 경우 셀 모듈이 방전될 수 있고, 화재가 발생할 수 있는 가능성에 따른 리콜 <*대상차량별 생산일자> BMW i4 eDrive40: 2021.11.24~2022.06.01 BMW i4 M50: 2021.11.23~2022.06.23 BMW iX M60: 2022.03.30~2022.03.30 BMW iX xDrive50: 2021.12.17~2022.06.27?
BMW of North America, LLC (BMW) is recalling certain 2022-2023 iX xDrive50, iX M60, 2022 i4 eDrive40, and i4 M50 vehicles. The high voltage battery may have internal damage, resulting in an electrical short-circuit.
The crash pads for the high-voltage battery may not have been assembled. This can cause damage to the high-voltage battery in the event of a serious side crash and may cause a short-circuit increasing the risk of a fire.
생산 과정에서 고전압 배터리 충격 완화 패드가 장착되지 않았을 가능성이 있으며, 매우 드문 경우지만 강한 측면 충돌의 경우 고전압 배터리 손상이 발생할 수 있고, 이로인해 고전압 배터리에서 단락이 발생하여 화재가 발생할 수 있는 가능성에 따른 리콜 <*대상차량별 생산일자> BMW i4 eDrive40: 2021.11.23~2021.11.30 BMW i4 M50: 2021.11.22~2021.11.25
On affected vehicles the battery module frame may have been manufactured using too much force. In conjunction with swelling force of the battery this could lead to failure and a possible thermal event within the vehicles life time.
Issue: On certain vehicles, a problem with the electric drive motor software could cause the vehicle to enter a fail-safe mode. If this happens, there could be a loss of power to the wheels. Note: This problem would cause a warning light to turn on and a warning message to be displayed. Safety Risk: A loss of power to the wheels could increase the risk of a crash. Corrective Actions: BMW will notify owners by mail and send a wireless over-the-air software update to eligible vehicles to update the electric drive motor software. Alternatively, you may schedule an appointment to have the update performed at a BMW dealership.
出典:NHTSA(米国、パブリックドメイン)、カナダ運輸省(Open Government Licence – Canada)、DVSA(英国、Open Government Licence v3.0)、RappelConso および EU Safety Gate(フランス、Licence Ouverte 2.0)、国土交通省(日本、公共データ利用規約1.0)、韓国国土交通部(car.go.kr)。