Continued flexing of the inboard front seat belt buckle assembly straps can result in eventual strap failure near the anchor location. This could result in the increased risk of front seat occupant injury during a sudden stop or vehicle crash. Correction: Straps will be inspected and reinforced or replaced with a strengthened version as required.
On certain vehicles, fuel tanks may have been constructed of incorrect material which would prevent proper welding of the seam joining the upper and lower tank halves. This would result in fuel leakage and in the presence of an ignition source a vehicle fire. Correction: Fuel tanks will be inspected and replaced if required.
On certain vehicles, the date code on the fuel tank may have been improperly stamped, either causing a puncture or an extremely thin section of metal which could result in fuel leakage. Under some circumstances this could cause an underbody fire which could be hazardous to vehicle occupants. Correction: Vehicles will be inspected and fuel tanks replaced where required.
First rear seats were installed with an incorrect left side seat riser which causes failure to comply with the seat and seat belt loading requirements of fmvss 207, seating systems. Consequence of defect: If an accident occurred, the seats may become detached, causing serious injuries to its occupants.
The fuel supply tube from the fuel pump to the fuel filter could experience fatigue cracking at the fuel pump end as the result of resonant vibration during vehicle operation. This could result in fuel leakage and present the potential for fire.
The metal fuel supply tube may crack at the fuel pump end due to vibration. The crack may result in fuel leakage. (the fuel supply tube connects the fuel pump to the fuel filter.)
Vans equipped with the optional sunscreen rear glass which has less than 70 percent luminous transmittance and does not have a passenger side outside rearview mirror are not in compliance with fmvss 111, rear view mirrors. Consequence of defect: The drivers of these vans do not have the minimum field of vision required by fmvss 111. Without this minimum field of vision the driver cannot maneuver his vehicle safely and may cause an accident.
On certain vehicles, stones could become lodged in the height sensing brake proportioning valve. Inhibited valve function, due to stone intrusion, may result in increased stopping distances during severe braking with light loads.
Roadway stones may become lodged in the height sensing brake proportioning valve. This may cause the proportioning valve to fail. Consequence of defect: Proportioning valve malfunction results in increased stopping distances during hard braking with a light load and may cause an accident.
出典:NHTSA(米国、パブリックドメイン)、カナダ運輸省(Open Government Licence – Canada)、DVSA(英国、Open Government Licence v3.0)、RappelConso および EU Safety Gate(フランス、Licence Ouverte 2.0)、国土交通省(日本、公共データ利用規約1.0)、韓国国土交通部(car.go.kr)。