閲覧無料 · 投稿は無料アカウントでAnticars(2000年)の後継

DodgeDodge デュランゴ

1997– · 3 世代 · 不具合46件 · 3市場
世代

技術サービス通報(TSB)は、既知の不具合についてメーカーが販売店に送る修理指示です。安全リコールではありませんが、不具合の裏付けになることがよくあります。

年式
デュランゴ III · 2010–
技術通報中程度エンジンNA

技術通報

"Engine Oil Cooler Leak Customers may comment on one or more of the following: Vehicle overheats. Coolant overflow recovery bottle contains milky fluid. Coolant found leaking under the vehicle. Engine oil cooler is leaking. This bulletin involves installing a coolant flow restrictor and possibly replacing the engine oil cooler."

NHTSA · メーカー通報11011752モデルイヤー 2024原文(英語)で表示中 · 翻訳待ち詳細を見る →
デュランゴ III · 2010–
技術通報中程度エンジンNA

技術通報

COOLER Engine Oil Please be aware that the oil cooler seal is serviceable as a standalone part and should be considered for replacement as a remedy for fluid leak.

NHTSA · メーカー通報10248850モデルイヤー 2023原文(英語)で表示中 · 翻訳待ち詳細を見る →
デュランゴ III · 2010–
技術通報中程度エンジンNA

技術通報

PUMP Water For 2016-2024MY 3.6L Pentastar Upgrade with suspected coolant leak. PRIOR TO PERFORMING ANY WATER PUMP REPLACEMENT, PROCEED WITH INSPECTION INSTRUCTIONS FROM THE LATEST VERSION OF STAR ONLINE PUBLICATION S2307000002. Please submit pictures of the leak area thru the DIDI process outlined in the STAR Online document. NOTE: Some coolant residue may be found at the water pump weep hole plug area which may be normal, but coolant should not be dripping from this location. If unsure about, use the Pressurized Coolant System Inspection process as found in the Dealer Connect Cooling Diagnosis and Testing Procedures.

NHTSA · メーカー通報10248505モデルイヤー 2023原文(英語)で表示中 · 翻訳待ち詳細を見る →
デュランゴ III · 2010–
技術通報中程度エンジンNA

技術通報

PUMP Water For 2016-2024MY 3.6L Pentastar Upgrade with suspected coolant leak. PRIOR TO PERFORMING ANY WATER PUMP REPLACEMENT, PROCEED WITH INSPECTION INSTRUCTIONS FROM THE LATEST VERSION OF STAR ONLINE PUBLICATION S2307000002. Please submit pictures of the leak area thru the DIDI process outlined in the STAR Online document. NOTE: Some coolant residue may be found at the water pump weep hole plug area which may be normal, but coolant should not be dripping from this location. If unsure about, use the Pressurized Coolant System Inspection process as found in the Dealer Connect Cooling Diagnosis and Testing Procedures.

NHTSA · メーカー通報10244344モデルイヤー 2023原文(英語)で表示中 · 翻訳待ち詳細を見る →
デュランゴ III · 2010–
技術通報中程度エンジンNA

技術通報

Suspected engine coolant leak.

NHTSA · メーカー通報10243192モデルイヤー 2023原文(英語)で表示中 · 翻訳待ち詳細を見る →
デュランゴ III · 2010–
技術通報中程度エンジンNA

技術通報

Missing Upper Fuel Tank Heat Shield This bulletin involves installing the upper heat shield on the top of the fuel tank. Customers or technicians may notice that a vehicle that is equipped with a tow n go package that the upper fuel tank shield is missing.

NHTSA · メーカー通報10221357モデルイヤー 2021原文(英語)で表示中 · 翻訳待ち詳細を見る →
デュランゴ III · 2010–
技術通報中程度エンジンNA

技術通報

Missing Upper Fuel Tank Heat Shield This bulletin involves installing the upper heat shield on the top of the fuel tank. Customers or technicians may notice that a vehicle that is equipped with a tow n go package that the upper fuel tank shield is missing.

NHTSA · メーカー通報10212499モデルイヤー 2021原文(英語)で表示中 · 翻訳待ち詳細を見る →
デュランゴ II · 2003–2008
技術通報中程度エンジンNA

技術通報

Part Description: 5.7L ロングブロック Issue Description: この5.7Lロングブロックアセンブリは、EGRおよび非EGR仕様の両方に対応しています。非EGR仕様に本ロングブロックアセンブリを取り付ける場合は、EGRブロックオフプレート(53032739AA)を注文する必要があります。ただし、古いエンジンからEGRブロックオフプレートを移設する場合はこの限りではありません。

NHTSA · メーカー通報10229181モデルイヤー 2007自動翻訳 · 原文:英語詳細を見る →
デュランゴ III · 2010–
技術通報中程度エンジンNA

技術通報

Customer Satisfaction Notification T12 VECI Label The Vehicle Emission Control Information (VECI) label on about 120,000 of the above vehicles may be missing emission control information. The VECI label is often used during in-use Inspection and Maintenance (I/M) testing to verify proper emissions related components. Incorrect VECI label information could result in denial of vehicle registration for the vehicle in the state of California. A new VECI label must be installed.

NHTSA · メーカー通報10224875モデルイヤー 2015原文(英語)で表示中 · 翻訳待ち詳細を見る →
デュランゴ II · 2003–2008
技術通報中程度エンジンNA

技術通報

Service - Four Piece Oil Pan Gasket All Cummins Equipped Vehicles ONLY - The replacement oil pan gasket can be a four piece gasket rather than a single piece gasket. This applies to Cummins 5.9L and 6.7L engines only. Installation: 1. Clean the oil pan T-joints.~ 2. Fill the T-joint between the pan rail/gear housing and pan rail/rear seal retainer with sealant. Use Mopar Silicone Rubber Adhesive Sealant or equivalent. 3. Apply a 2-mm [0.063-in] bead of Mopar Engine Sealant RTV Silicone Rubber Adhesive, to the oil pan flange.~ 4. The four piece gasket will need to be assembled to make a complete oil pan gasket. 5. Lay the oil pan gasket(s) onto the oil pan flange.~ 6. Ensure the oil pan gasket segment joints are properly aligned. 7. Apply a 2-mm [0.063-in] bead of Mopar Engine Sealant RTV Silicone Rubber Adhesive, to the top of the oil pan gasket.~ 8. Install the oil pan. Starting from the center and working outward, tighten the oil pan bolts to 28 Nm [21 ft. lbs.].

NHTSA · メーカー通報10223854モデルイヤー 2007原文(英語)で表示中 · 翻訳待ち詳細を見る →
デュランゴ III · 2010–
技術通報中程度エンジンNA

技術通報

Replace Vehicle Emission Certification Information Label This bulletin involves replacing the Vehicle Emission Certification Information (VECI) Label.Owner may be turned away from Inspection and Maintenance (IM) station or fail IM testing because of missing emission components on VECI label. The customer may notice that some info is missing on their VECI labels.is missing. If information is shown in this area, do not replace the label.All vehicles were built with the correct emission components installed and there is no impact on emission performance or drivability.

NHTSA · メーカー通報10223853モデルイヤー 2015原文(英語)で表示中 · 翻訳待ち詳細を見る →
デュランゴ III · 2010–
技術通報中程度エンジンNA

技術通報

SEAL, Crankshaft Oil, Front Front crankshaft oil seal leak: For concern of front crankshaft seal leak please send an email to brenton.swank@fcagroup.com with VIN, Mileage, Photos and indicate where the leak is identified using dye such as: 1. Leak between the outer diameter of the seal to front cover? 2. Leak between the seal and damper 3. Leak through the damper bolt This will help in determining root cause and corrective action. For additional questions, please contact: Brenton Swank: Cell (248) 804-9386 or brenton.swank@fcagroup.com If no response in 15 minutes, proceed with repair.

NHTSA · メーカー通報10166535モデルイヤー 2019原文(英語)で表示中 · 翻訳待ち詳細を見る →
デュランゴ III · 2010–
技術通報中程度エンジンNA

技術通報

Replace Vehicle Emission Certification Information Label This bulletin involves replacing the Vehicle Emission Certification Information (VECI) Label.Owner may be turned away from Inspection and Maintenance (IM) station or fail IM testing because of missing emission components on VECI label. The customer may notice that some info is missing on their VECI labels.is missing. If information is shown in this area, do not replace the label.All vehicles were built with the correct emission components installed and there is no impact on emission performance or drivability.

NHTSA · メーカー通報10121890モデルイヤー 2015原文(英語)で表示中 · 翻訳待ち詳細を見る →
デュランゴ III · 2010–
技術通報中程度エンジンNA

技術通報

"pentastar oil filter adapter before replacing this part, please call any one of the following people. Engineering is seeking information regarding this part.~ dye must be used to determine where the leak is coming from before replacing. Also please check the recently updated service bulletin number 09-008-15. ~ first: Nick morand cell (248) 410-5078 - nick.Morand@fcagroup.Com second: Bob jackson cell (248) 944-0466 - bob.Jackson@fcagroup.Com third: Joe lovell cell (734 309-6467 - joe.Lovell@fcagroup.Com if a response is not received within 15 mins, then proceed with the necessary repair."

NHTSA · メーカー通報10080203モデルイヤー 2014原文(英語)で表示中 · 翻訳待ち詳細を見る →
デュランゴ III · 2010–
技術通報中程度エンジンNA

技術通報

Various vehicles are experiencing loss of oil, and possibly an oil leakage pooling in engine valley and possibly need replacing oil filter housing. Model 2014. *pe

NHTSA · メーカー通報10058301モデルイヤー 2014原文(英語)で表示中 · 翻訳待ち詳細を見る →
デュランゴ I · 1997–2003
技術通報中程度エンジンNA

技術通報

Concerns on incorrect fault mature time - dtc $b7 leak detection pump solenoid circuit. *nlm

NHTSA · メーカー通報6089148モデルイヤー 1998原文(英語)で表示中 · 翻訳待ち詳細を見る →
デュランゴ III · 2010–
技術通報軽微エンジンNA

技術通報

Emission Recall 83A Sales Code Alignment

NHTSA · メーカー通報10251814モデルイヤー 2022–2023原文(英語)で表示中 · 翻訳待ち詳細を見る →
デュランゴ III · 2010–
技術通報軽微エンジンNA

技術通報

PSU Oil Pump Assy

NHTSA · メーカー通報10248966モデルイヤー 2023原文(英語)で表示中 · 翻訳待ち詳細を見る →
デュランゴ III · 2010–
技術通報軽微エンジンNA

技術通報

ENGINE ASSY - 3.6L AUTO TRANS Before replacing the engine due to an abnormal ticking noise, please check that the INTAKE Hydraulic Lash Adjusters are not "collapsed". If a collapsed INTAKE HLA is found, replace all INTAKE HLAs on the suspect cylinder head. The noise can occur at low or high RPMs, and at low or high temperatures. There are no Diagnostic Trouble Codes (DTC)s present. CAUSE: INTAKE Hydraulic Lash Adjuster may have a manufacturing issue that can cause the plunger to stick, generating valvetrain noise.

NHTSA · メーカー通報10247902モデルイヤー 2022–2023原文(英語)で表示中 · 翻訳待ち詳細を見る →
デュランゴ III · 2010–
技術通報軽微エンジンNA

技術通報

Fuel Nozzle Premature Shut Off The customer may experience the following: ? Hard to fill fuel tank, premature fuel nozzle shut off. This bulletin involves inspecting and replacing the fuel filler tube

NHTSA · メーカー通報10242824モデルイヤー 2023原文(英語)で表示中 · 翻訳待ち詳細を見る →
デュランゴ III · 2010–
技術通報軽微エンジンNA

技術通報

Engine Ticking Noise Engine makes an abnormal ticking noise. There may be Diagnostic Trouble Codes (DTC)s present. This bulletin involves inspecting and if needed, replacing the intake HLAs. NOTE: **ALL VEHICLES ON THE RSU VIN LIST REQUIRE ALL 12 INTAKE HYDRAULIC LASH ADJUSTERS TO BE REPLACED**.

NHTSA · メーカー通報10239951モデルイヤー 2022–2023原文(英語)で表示中 · 翻訳待ち詳細を見る →
デュランゴ III · 2010–
技術通報軽微エンジンNA

技術通報

Water Quality When Mixed With Engine Coolant

NHTSA · メーカー通報10239957モデルイヤー 2023原文(英語)で表示中 · 翻訳待ち詳細を見る →
デュランゴ III · 2010–
技術通報軽微エンジンNA

技術通報

Engine makes an abnormal ticking noise. There may be Diagnostic Trouble Codes (DTC)s present.

NHTSA · メーカー通報10239995モデルイヤー 2022–2023原文(英語)で表示中 · 翻訳待ち詳細を見る →
デュランゴ III · 2010–
技術通報軽微エンジンNA

技術通報

Engine makes an abnormal ticking noise. There may be Diagnostic Trouble Codes (DTCs) present.

NHTSA · メーカー通報10239996モデルイヤー 2022–2023原文(英語)で表示中 · 翻訳待ち詳細を見る →
デュランゴ III · 2010–
技術通報軽微エンジンNA

技術通報

PSU right intake camshaft Case 1) If you are to flash the PSU (Pentastar Upgrade Engine) PCM due to P0300 code presence, only AB or previous LEVEL PSU right intake camshaft PN 05047913AA or AB (old version) should be replaced. If the engine is equipped with the AC/AD LEVEL PSU right intake camshaft PN 05047913AC or AD (new version), camshaft should NOT be replaced. Case 2) If the intake camshaft or intake rocker arm has excessive wear on the high lift profile (Rocker arm: slider, Camshaft: central lobe), replace the intake camshaft (1) in that cylinder head and all intake rocker arms (6).

NHTSA · メーカー通報10239855モデルイヤー 2023原文(英語)で表示中 · 翻訳待ち詳細を見る →
古いもの →

出典:NHTSA(米国、パブリックドメイン)、カナダ運輸省(Open Government Licence – Canada)、DVSA(英国、Open Government Licence v3.0)、RappelConso および EU Safety Gate(フランス、Licence Ouverte 2.0)、国土交通省(日本、公共データ利用規約1.0)、韓国国土交通部(car.go.kr)。