閲覧無料 · 投稿は無料アカウントでAnticars(2000年)の後継
ログインアカウント作成
NANHTSA · メーカー通報10223854

技術サービス通報

原文(英語)で表示中 · 翻訳待ち

Service - Four Piece Oil Pan Gasket All Cummins Equipped Vehicles ONLY - The replacement oil pan gasket can be a four piece gasket rather than a single piece gasket. This applies to Cummins 5.9L and 6.7L engines only. Installation: 1. Clean the oil pan T-joints.~ 2. Fill the T-joint between the pan rail/gear housing and pan rail/rear seal retainer with sealant. Use Mopar Silicone Rubber Adhesive Sealant or equivalent. 3. Apply a 2-mm [0.063-in] bead of Mopar Engine Sealant RTV Silicone Rubber Adhesive, to the oil pan flange.~ 4. The four piece gasket will need to be assembled to make a complete oil pan gasket. 5. Lay the oil pan gasket(s) onto the oil pan flange.~ 6. Ensure the oil pan gasket segment joints are properly aligned. 7. Apply a 2-mm [0.063-in] bead of Mopar Engine Sealant RTV Silicone Rubber Adhesive, to the top of the oil pan gasket.~ 8. Install the oil pan. Starting from the center and working outward, tighten the oil pan bolts to 28 Nm [21 ft. lbs.].

対象: Dodge Avenger sedan (モデルイヤー 2008) · Dodge Caravan IV (モデルイヤー 2007) · Dodge Challenger (モデルイヤー 2008) · Dodge Durango II (モデルイヤー 2007) · Dodge Magnum (2005–2008) (モデルイヤー 2007) · Dodge Neon II (モデルイヤー 2001) · Dodge Nitro (モデルイヤー 2007) · Dodge Ram II (モデルイヤー 1998) · Dodge Ram SRT-10 (モデルイヤー 2006) · Dodge Ram Van III (モデルイヤー 2001) · Dodge SRT-4 (モデルイヤー 2005) · Ram ProMaster III (モデルイヤー 2015–2016)

公式情報 ↗

出典:NHTSA(米国、パブリックドメイン)、カナダ運輸省(Open Government Licence – Canada)、DVSA(英国、Open Government Licence v3.0)、RappelConso および EU Safety Gate(フランス、Licence Ouverte 2.0)、国土交通省(日本、公共データ利用規約1.0)、韓国国土交通部(car.go.kr)。