1,039 owners in the United States reported problems with the electrical system of this car to NHTSA (model years 2009–2013), typically at around 66,000 miles. Reported consequences: 14 crashes, 64 fires, 14 injuries.
842 owners in the United States reported problems with the brakes of this car to NHTSA (model years 2009–2013), typically at around 57,000 miles. Reported consequences: 73 crashes, 5 fires, 31 injuries, 4 deaths.
NHTSA, the US road safety agency, opened an engineering analysis (EA15006) into this problem on 16 October 2015 for 2011–2012 models; it was closed on 28 April 2016 without a recall.
Ford Motor Company (Ford) is recalling certain 2013 F-150 vehicles equipped with 5.0L or 6.2L gasoline engines, that previously had the powertrain control module (PCM) software reprogrammed under recall 19V-075. The software used to reprogram the PCM did not have the necessary updates to prevent the transmission from unexpectedly downshifting into first gear, regardless of vehicle speed.
Ford Motor Company (Ford) is recalling certain 2011-2013 F-150 vehicles equipped with a 6-speed automatic transmission. The transmission may unexpectedly downshift into first gear, regardless of vehicle speed.
Some 2019 F-150 Raptor vehicles built on or before 15-Nov-2018 may exhibit a harsh or bumpy ride during all driving conditions. To resolve this concern, reprogram the vehicle dynamics control module (VDM) using the latest software version of the appropriate Ford diagnostic scan tool. For claiming, use causal part 18B008 and applicable labor operations in Section 10 of the Service Labor Time Standards (SLTS) Manual.
Some vehicles may exhibit a no start condition with an illuminated malfunction indicator lamp (MIL) and a DTC P161A after PCM replacement. This may be due to the parameter reset procedure not being properly completed. To clear this DTC, use the Ford Integrated Diagnostic System (IDS) service tool or Ford J2534 Diagnostic Software, select - Toolbox - Body - Security - PATS Functions - Parameter Reset. Follow the on-screen instructions to complete the procedure. This procedure will transfer the existing Key ID information between the modules without the need of having 2 programmed PATS keys present. There is no need to program keys when the PCM is going to be replaced. Additional information can be found in the Workshop Manual (WSM), Section 419-01. Missing or lost keys are not warrantable.
出典:NHTSA(米国、パブリックドメイン)、カナダ運輸省(Open Government Licence – Canada)、DVSA(英国、Open Government Licence v3.0)、RappelConso および EU Safety Gate(フランス、Licence Ouverte 2.0)、国土交通省(日本、公共データ利用規約1.0)、韓国国土交通部(car.go.kr)。