その他(燃料装置)
燃料注入口のアウターパイプに嵌合しているインナーパイプの溶接位置に不適切なものが あるため、インナーパイプが燃料フィラーキャプのシールと干渉するものがあり、そのま まの状態で使用を続けると、フィラーキャップとアウターパイプの気密性が損なわれ、最 悪の場合、当該部位から燃料蒸発ガスが大気に排出するおそれがある。
🔔 無料アカウントを作成して Ford プローブ (すべての世代) のメール通知を受け取る
燃料注入口のアウターパイプに嵌合しているインナーパイプの溶接位置に不適切なものが あるため、インナーパイプが燃料フィラーキャプのシールと干渉するものがあり、そのま まの状態で使用を続けると、フィラーキャップとアウターパイプの気密性が損なわれ、最 悪の場合、当該部位から燃料蒸発ガスが大気に排出するおそれがある。
Certain vehicles may not comply with the requirements of CMVSS 1105 - Evaporative Emissions. Fuel vapour may leak from between the fuel cap and the fuel filler pipe. Correction: Filler cap will be replaced with one that incorporates an o-ring that will positively seal the suspect fuel filler pipes.
On certain vehicles, an external spring in the timing belt auto tensioner may break. The broken spring may get caught in the timing belt, resulting in possible engine stalling. Correction: Vehicles will be inspected and affected tensioners will be replaced.
Vehicle description: Passenger vehicles. An external spring in the timing belt tensioner can break and get caught in the timing belt.
コンプライアンス試験の結果、これらの車両は c.M.V.S.S. 1103 - 排気ガス排出の要件を超える一酸化炭素(CO)を排出している可能性があることが示されています。是正措置:対象車両の触媒コンバーターを交換します。
注記:95038により置き換えられました。これらの車両は、C.M.V.S.S 1103(排気ガス排出)に適合していない可能性があります。触媒が規制値を超える排出ガスを排出している可能性があります。是正措置:対象車両の排気システム触媒を交換します。
Note: Vehicles with 3.0 litre engine. These vehicles may not comply with c.M.V.S.S. 1103 - exhaust emissions. Throttle position sensor may wear prematurely causing interruption of the sensor signal. Correction: Throttle position sensor will be inspected and replaced if necessary.
Vehicles with 3.0l engines and automatic transmissions only. These vehicles do not comply with c.M.V.S.S 1103 - exhaust emissions. Carbon monoxide levels exceed standard. Correction: Dealers will replace the electronic engine control (eec) processor and attach two decals.
Vehicles with 3 litre engines may have throttle levers that were bent during vehicle assembly. If this condition exists, there is a potential that the throttle may stick and not return fully to the idle position. This could cause possible loss of vehicle control. Correction: Vehicles will be inspected and if necessary, the intake manifold assembly will be replaced.
Throttle levers may have been bent during assembly.
車体の中央下部にある副消音器後部の排気管接合部に溶接不良のものがあるため、そのま まの状態で使用を続けると、当該溶接部位に亀裂が発生し、そこから排気ガスが漏れると ともに、騒音が増大するおそれがある。
出典:NHTSA(米国、パブリックドメイン)、カナダ運輸省(Open Government Licence – Canada)、DVSA(英国、Open Government Licence v3.0)、RappelConso および EU Safety Gate(フランス、Licence Ouverte 2.0)、国土交通省(日本、公共データ利用規約1.0)、韓国国土交通部(car.go.kr)。