閲覧無料 · 投稿は無料アカウントでAnticars(2000年)の後継

Ford プローブ

1988–1997 · 2 世代 · 不具合24件 · 1市場
世代
年式
プローブ I (1989) · 1988–1992プローブ II (1993) · 1992–1997
リコール重大電装JP

その他(その他)

音響機器のオーディオ本体の配線基盤において、当該基盤の製造工程が不適切なため、コ ンデンサが損傷しているものがあり、そのままの状態で使用を続けると、当該コンデンサ の端子間が短絡して、スピーカに過大な電流が流れ、最悪の場合、火災にいたるおそれが ある。

国土交通省 · 日本1997年12月17日1206640モデルイヤー 1991–1993詳細を見る →
プローブ II (1993) · 1992–1997
リコール重大内装NA

Seats And Restraints

The passenger side supplemental restraint system (air bag) may have a cracked inflator body. If the vehicle is involved in a deployment level crash, the passenger side air bag may not inflate properly which could result in reduced occupant protection. In addition, the igniter plug could separate from the inflator, which could result in the release of hot gases and could ignite flammable material or potentially cause personal injury. Correction: Vehicles will be inspected and a new passenger side air bag module will be installed if necessary.

カナダ運輸省1995年2月21日1995032モデルイヤー 1995原文(英語)で表示中 · 翻訳待ち詳細を見る →
プローブ I (1989) · 1988–1992
リコール重大内装NA

Seat belts:Front:Anchorage

Brackets mounting automatic shoulder belt retractor assembly may have an understrength spot weld.

NHTSA · 米国1991年1月1日91V016000モデルイヤー 1991原文(英語)で表示中 · 翻訳待ち詳細を見る →
プローブ II (1993) · 1992–1997
リコール中程度エンジンJP

その他(燃料装置)

燃料注入口のアウターパイプに嵌合しているインナーパイプの溶接位置に不適切なものが あるため、インナーパイプが燃料フィラーキャプのシールと干渉するものがあり、そのま まの状態で使用を続けると、フィラーキャップとアウターパイプの気密性が損なわれ、最 悪の場合、当該部位から燃料蒸発ガスが大気に排出するおそれがある。

国土交通省 · 日本1999年10月13日1207600モデルイヤー 1995–1996詳細を見る →
プローブ II (1993) · 1992–1997
リコール中程度エンジンNA

Emissions

Certain vehicles may not comply with the requirements of CMVSS 1105 - Evaporative Emissions. Fuel vapour may leak from between the fuel cap and the fuel filler pipe. Correction: Filler cap will be replaced with one that incorporates an o-ring that will positively seal the suspect fuel filler pipes.

カナダ運輸省1999年7月26日1999134モデルイヤー 1995–1997原文(英語)で表示中 · 翻訳待ち詳細を見る →
プローブ II (1993) · 1992–1997
リコール中程度エンジンNA

Engine

On certain vehicles, an external spring in the timing belt auto tensioner may break. The broken spring may get caught in the timing belt, resulting in possible engine stalling. Correction: Vehicles will be inspected and affected tensioners will be replaced.

カナダ運輸省1998年11月16日1998225モデルイヤー 1997原文(英語)で表示中 · 翻訳待ち詳細を見る →
プローブ II (1993) · 1992–1997
リコール中程度エンジンNA

Engine and engine cooling:Engine

Vehicle description: Passenger vehicles. An external spring in the timing belt tensioner can break and get caught in the timing belt.

NHTSA · 米国1998年11月3日98V206002モデルイヤー 1997原文(英語)で表示中 · 翻訳待ち詳細を見る →
プローブ I (1989) · 1988–1992
リコール中程度内装NA

Seats And Restraints

The rail of the motorized seat belt track assembly may wear sufficiently under certain conditions to cause the cable which pushes and pulls the moveable buckle assembly to jam in the track, causing the seat belt track assembly to be inoperative. Correction: Driver side motorized shoulder belt tracks will be replaced with increased durability tracks. Passenger side belt tracks will be inspected and/or replaced as necessary.

カナダ運輸省1996年9月30日1996153モデルイヤー 1990–1992原文(英語)で表示中 · 翻訳待ち詳細を見る →
プローブ I (1989) · 1988–1992
リコール中程度内装NA

Seat belts:Front:Webbing

Note: Driver's side (left) passive seat belt assembly. The rail of the automatic shoulder belt can wear sufficiently such that the cable which retracts the buckle assembly will become jammed in the rail rendering the shoulder belt inoperative.

NHTSA · 米国1996年9月6日96V172001モデルイヤー 1990–1992原文(英語)で表示中 · 翻訳待ち詳細を見る →
プローブ I (1989) · 1988–1992
リコール中程度内装NA

Seat belts:Front:Webbing

Note: Passenger side (right) seat belt assembly. The rail of the automatic shoulder belt can wear sufficiently such that the cable which retracts the buckle assembly will become jammed in the rail rendering the shoulder belt inoperative.

NHTSA · 米国1996年9月6日96V172002モデルイヤー 1990–1992原文(英語)で表示中 · 翻訳待ち詳細を見る →
プローブ I (1989) · 1988–1992プローブ II (1993) · 1992–1997
リコール中程度電装NA

Electrical

The fuel pump wiring assembly may corrode due to road salt, possibly resulting in an electrical bridge developing between the fuel pump electrical circuit and the fuel gauge sender terminals. This could cause the fuel sender ground circuit to overheat the wiring and melt its insulation causing smoke and possible damage to other wiring. Correction: A fused jumper harness will be installed in the fuel pump/sender electrical circuit.

カナダ運輸省1995年6月13日1995099モデルイヤー 1989–1995原文(英語)で表示中 · 翻訳待ち詳細を見る →
プローブ I (1989) · 1988–1992
リコール中程度エンジンNA

Emissions

コンプライアンス試験の結果、これらの車両は c.M.V.S.S. 1103 - 排気ガス排出の要件を超える一酸化炭素(CO)を排出している可能性があることが示されています。是正措置:対象車両の触媒コンバーターを交換します。

カナダ運輸省1995年2月27日1995038モデルイヤー 1990自動翻訳 · 原文:英語詳細を見る →
プローブ I (1989) · 1988–1992
リコール中程度エンジンNA

Emissions Translated heading: 排出ガス

注記:95038により置き換えられました。これらの車両は、C.M.V.S.S 1103(排気ガス排出)に適合していない可能性があります。触媒が規制値を超える排出ガスを排出している可能性があります。是正措置:対象車両の排気システム触媒を交換します。

カナダ運輸省1995年2月16日1995027モデルイヤー 1990自動翻訳 · 原文:英語詳細を見る →
プローブ II (1993) · 1992–1997
リコール中程度内装NA

Seats And Restraints

These vehicles do not comply with c.M.V.S.S. 210.1 tether anchorages for child restraints. The english tether bolt and metric anchor nut combination is not compatible with the standard. Also, information concerning the installation of the bolt contained in the owner guide is incorrect. Correction: New child restraint anchor bolt kits will be mailed to owners along with two revised stick-on owner guide pages. Also, dealers will replace incorrect panel weld nut if required.

カナダ運輸省1994年3月22日1994060モデルイヤー 1993原文(英語)で表示中 · 翻訳待ち詳細を見る →
プローブ II (1993) · 1992–1997
リコール中程度内装NA

Air bags:Frontal

If the passenger-side air bag deploys in an accident and there is no passenger in that seating position, the air bag can detach from, and deform, the mounting bracket.

NHTSA · 米国1993年10月15日93V169000モデルイヤー 1994原文(英語)で表示中 · 翻訳待ち詳細を見る →
プローブ II (1993) · 1992–1997
リコール中程度ボディNA

Structure

The lower pivot pin that joins the liftgate gas strut to the body may separate from the lower strut mounting bracket due to an undersized rivet head. If the pin separates, the liftgate could fall and possibly cause injury to persons under the falling liftgate. Correction: Vehicles will be inspected and, if one or both of the rivet heads are undersized, that liftgate will be replaced.

カナダ運輸省1993年6月1日1993079モデルイヤー 1993原文(英語)で表示中 · 翻訳待ち詳細を見る →
プローブ II (1993) · 1992–1997
リコール中程度ボディNA

Structure:Body:Hatchback/liftgate:Support device/strut

Vehicle description: Passenger vehicles. The lower pivot pin that joins the liftgate gas strut to the body can separate from the lower strut mounting bracket due to an undersized rivet head.

NHTSA · 米国1993年4月13日93V058000モデルイヤー 1993原文(英語)で表示中 · 翻訳待ち詳細を見る →
プローブ I (1989) · 1988–1992
リコール中程度エンジンNA

Emissions

Note: Vehicles with 3.0 litre engine. These vehicles may not comply with c.M.V.S.S. 1103 - exhaust emissions. Throttle position sensor may wear prematurely causing interruption of the sensor signal. Correction: Throttle position sensor will be inspected and replaced if necessary.

カナダ運輸省1992年8月21日1992100モデルイヤー 1990–1991原文(英語)で表示中 · 翻訳待ち詳細を見る →
プローブ I (1989) · 1988–1992
リコール中程度エンジンNA

Emissions

Vehicles with 3.0l engines and automatic transmissions only. These vehicles do not comply with c.M.V.S.S 1103 - exhaust emissions. Carbon monoxide levels exceed standard. Correction: Dealers will replace the electronic engine control (eec) processor and attach two decals.

カナダ運輸省1991年10月29日1991145モデルイヤー 1990原文(英語)で表示中 · 翻訳待ち詳細を見る →
プローブ I (1989) · 1988–1992
リコール中程度内装NA

Seats And Restraints

The brackets to which the automatic shoulder belt retractor assembly is mounted under the centre console may have understrength spot welds that might reduce the effectiveness of the shoulder belt in the event of a vehicle collision. Correction: Dealers will install two bolts to secure the brackets on affected vehicles.

カナダ運輸省1991年3月12日1991040モデルイヤー 1991原文(英語)で表示中 · 翻訳待ち詳細を見る →
プローブ I (1989) · 1988–1992
リコール中程度電装NA

Lights And Instruments

These vehicles do not comply with c.M.V.S.S. 108 - lighting. Daytime running lights shut off whenever signal lights are activated. Correction: A revised design drl module will be installed on affected vehicles.

カナダ運輸省1991年2月11日1991020モデルイヤー 1990原文(英語)で表示中 · 翻訳待ち詳細を見る →
プローブ I (1989) · 1988–1992
リコール中程度エンジンNA

Engine

Vehicles with 3 litre engines may have throttle levers that were bent during vehicle assembly. If this condition exists, there is a potential that the throttle may stick and not return fully to the idle position. This could cause possible loss of vehicle control. Correction: Vehicles will be inspected and if necessary, the intake manifold assembly will be replaced.

カナダ運輸省1989年9月28日1989133モデルイヤー 1990原文(英語)で表示中 · 翻訳待ち詳細を見る →
プローブ I (1989) · 1988–1992
プローブ I (1989) · 1988–1992プローブ II (1993) · 1992–1997
リコール軽微エンジンJP

排気管

車体の中央下部にある副消音器後部の排気管接合部に溶接不良のものがあるため、そのま まの状態で使用を続けると、当該溶接部位に亀裂が発生し、そこから排気ガスが漏れると ともに、騒音が増大するおそれがある。

国土交通省 · 日本1997年3月27日1206330モデルイヤー 1992–1993詳細を見る →
プローブ II (1993) · 1992–1997
リコール軽微内装NA

Air bags

The supplementary air bag inflatable restraint caution label located on the driver side sun visor does not contain the statement, "do not install rearward facing child seats in any front passenger seat position." this does not comply with the requirements of fmvss no. 208, "occupant crash protection."

NHTSA · 米国1996年6月3日96V090000モデルイヤー 1996原文(英語)で表示中 · 翻訳待ち詳細を見る →

出典:NHTSA(米国、パブリックドメイン)、カナダ運輸省(Open Government Licence – Canada)、DVSA(英国、Open Government Licence v3.0)、RappelConso および EU Safety Gate(フランス、Licence Ouverte 2.0)、国土交通省(日本、公共データ利用規約1.0)、韓国国土交通部(car.go.kr)。