Customer Satisfaction Program. Certain vehicles may have an incomplete or missing braze between the harness bulkhead support bracket and the fuel rail assembly. If the braze is incomplete the support bracket may detach from the fuel rail assembly over time. Wiring may sever and compromise the function of the fuel pump and/or the 4 passenger side injectors. If the function of the fuel pump and/or injectors is compromised, the Check Engine Light will come on, and you could experience reduced engine power. Loss of propulsion is possible, and there is a remote chance of fire if there is a fuel leak. Replace fuel rail assembly.
Customer Satisfaction Program. Certain vehicles may have an incomplete or missing braze between the harness bulkhead support bracket and the fuel rail assembly. If the braze is incomplete the support bracket may detach from the fuel rail assembly over time. Wiring may sever and compromise the function of the fuel pump and/or the 4 passenger side injectors. If the function of the fuel pump and/or injectors is compromised, the Check Engine Light will come on, and you could experience reduced engine power. Loss of propulsion is possible, and there is a remote chance of fire if there is a fuel leak. Replace fuel rail assembly.
15577 - customer satisfaction program (message only instructing dealers of process to order missing labels). Some vehicles have an incorrect electrical circuit label on the instrument panel left end cap cover that shows four incorrect fuse positions. This condition could lead to service confusion, and possible improper fuse installation. Fuses protect wiring circuits, and if a higher than required fuse is installed, the circuit wire may fault open or increased risk of fire may result.
15577 - customer satisfaction program. Vehicles have an incorrect electrical circuit label on the instrument panel left end cap cover that shows four incorrect fuse positions. This condition could lead to service confusion, and possible improper fuse installation. Fuses protect wiring circuits, and if a higher than required fuse is installed, the circuit wire may fault open or increased risk of fire may result. Dealers are to install a corrected label. Since a new label can be easily installed, and to reduce customer inconvenience, the label was sent directly to customers of record along with the installation instructions. Customers may install the label, or if they desire, they may bring the label to their dealer for installation at no charge.
Fixes to reduce activations of Automatic Emergency Braking Disabled light. Improvements to availability for Lane Keep Assist. Fixes to help ensure proper functionality for Brake Assist. Fixes for active cabin ventilation. Improvements to the performance of vehicle software updates. Fixes to help ensure successful vehicle software updates.
Certain vehicles listed above may have a condition in which hard braking may unexpectedly engage. Dealers will re-program the IPM or Front View Camera depending on what the vehicle is equipped with.
Certain vehicles listed above may have a condition in which hard braking may unexpectedly engage. Dealers will re-program the IPM or Front View Camera depending on what the vehicle is equipped with.
This PI communicates an issue where the Brake System Control ModuleDTC: U0028-88 and U0037-88 diagnostics are backwards and follow the diagnostic procedure for U0037 if U0028 is set and vice versa.
Fixes to help ensure proper functionality for Brake Assist. Fixes to help ensure successful vehicle software updates. During the update process, your radio may stay on up to 5 minutes after you exit the vehicle. This is expected behavior when an update package is onboard the vehicle. Do not service your vehicle during installation.
Improvements to the performance of Automatic Emergency Braking and Adaptive Cruise Control braking. Fixes to help ensure proper functionality of Forward Collision Alert and availability of driver assistance features. During the update process, your radio may stay on up to 5 minutes after you exit the vehicle. This is expected behavior when an update package is onboard the vehicle. Do not service your vehicle during installation.
Fixes to help protect battery health. Improvements to traction while driving on difficult terrain and using Four-Wheel Drive Low. During the update process, your radio may stay on up to 5 minutes after you exit the vehicle. This is expected behavior when an update package is onboard the vehicle. Do not service your vehicle during installation.
This PI communicates information that the Collision / Detection Systems will revert to default setting of Alert and Brake after an Ignition Cycle due to an Engineering change.
This PI communicates an issue where the Brake System Control ModuleDTC: U0028-88 and U0037-88 diagnostics are backwards and follow the diagnostic procedure for U0037 if U0028 is set and vice versa.
Certain vehicles may have a condition in which the Upper Intermediate Steering Shaft Bolt is below torque specification. Dealers will torque the Upper Intermediate Steering Shaft Bolt to specification.
This preliminary information communicates an issue with a Service Brake system message and DTC C0597 C055F. Dealers are to replace the brake master cylinder.
This preliminary information communicates an issue with a Service Brake system message and DTC C0597. Dealers are to replace the brake master cylinder.
This preliminary information communicates an issue with the brake system control module calibrations not being available when the GM dealership installed brake kit RPO 5JL and explains the calibrations are only for the brake pad life monitoring system.
This PI communicates information that the Collision / Detection Systems will revert to default setting of Alert and Brake after an Ignition Cycle due to an Engineering change.
This PI communicates information that the Collision / Detection Systems will revert to default setting of Alert and Brake after an Ignition Cycle due to an Engineering change.
This preliminary information communicates an issue with the brake system control module calibrations not being available when the GM dealership installed brake kit RPO 5JL and explains the calibrations are only for the brake pad life monitoring system.
This informational bulletin provides information on Automated Brake Bleed and/or Brake Hydraulic Test procedure fails when attempting to perform either procedure.
出典:NHTSA(米国、パブリックドメイン)、カナダ運輸省(Open Government Licence – Canada)、DVSA(英国、Open Government Licence v3.0)、RappelConso および EU Safety Gate(フランス、Licence Ouverte 2.0)、国土交通省(日本、公共データ利用規約1.0)、韓国国土交通部(car.go.kr)。