閲覧無料 · 投稿は無料アカウントでAnticars(2000年)の後継

Hyundai XG

1986– · 7 世代 · 不具合0件 · 3市場
世代

Hyundai XG のすべての世代をまとめて:不具合、リコール、サービス情報、ディスカッション。世代を選ぶと絞り込めます。

重大な不具合

この条件で掲載されている不具合はまだありません。

最新の公式リコール

すべて表示 (28) →
XG V · 2011–2016
リコール重大ブレーキNA修理まで屋外に駐車してください

Service brakes, hydraulic:Antilock/traction control/electronic limited slip:Control unit/module

Hyundai Motor America (Hyundai) is recalling certain 2011-2015 Elantra, Genesis Coupe, Sonata Hybrid, 2012-2015 Accent, Azera, Veloster, 2013-2015 Elantra Coupe, Santa Fe, 2014-2015 Equus, 2010-2012 Veracruz, 2010-2013 Tucson, 2015 Tucson Fuel Cell, and 2013 Santa Fe Sport vehicles. The Anti-Lock Brake System (ABS) module may leak brake fluid internally and cause an electrical short, which can result in an engine compartment fire while parked or driving.

NHTSA · 米国2023年9月22日23V651000モデルイヤー 2012–2015原文(英語)で表示中 · 翻訳待ち詳細を見る →
XG V · 2011–2016XG VI · 2016–2022
リコール中程度ボディNA

Latches/locks/linkages:Trunk lid:Latch

Hyundai Motor America (Hyundai) is recalling certain 2017-2018 Sonata, 2016-2018 Sonata Hybrid, 2018-2020 Accent, and 2016-2017 Azera vehicles. The trunk latch may become damaged, preventing the opening of the trunk from the inside. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 401, "Internal Trunk Release."

NHTSA · 米国2021年8月6日21V619000モデルイヤー 2016–2017原文(英語)で表示中 · 翻訳待ち詳細を見る →
XG IV · 2005–2011
リコール重大ブレーキNA

Brakes

On certain vehicles equipped with an anti-lock brake system (ABS), the ABS module remains powered on when the vehicle is turned off. If moisture were to enter the module, over time, an electrical short could occur, which could increase the risk of an underhood fire causing injury and/or property damage. Correction: Dealers will install a relay in the vehicle’s main junction box to ensure the ABS module is powered off upon the vehicle being turned off.

カナダ運輸省2018年1月16日2018033モデルイヤー 2006–2009原文(英語)で表示中 · 翻訳待ち詳細を見る →

最新の技術サービス通報

すべて表示 (158) →
XG III · 1998–2005
技術通報中程度内装NA

技術通報

The National Highway Traffic Safety Administration (NHTSA) has identified the presence of substandard and dangerous drivers-side airbag inflators manufactured by Jilin Province Detiannuo Automobile Safety System Co., Ltd. (DTN). These inflators were not supplied, approved, or authorized by the vehicle manufacturers and have primarily been found in vehicles that previously experienced a crash and underwent airbag replacement using non-genuine parts. These dangerous inflators have ruptured during deployment, posing a serious risk of injury or death due to metal fragments entering the vehicle cabin. To date, Hyundai is aware of three people who have died while driving a Hyundai vehicle with one of these substandard replacement airbag inflators that deployed in what likely would have been a survivable crash. NHTSA has issued a public advisory urging vehicle owners and service professionals to have vehicles inspected if there is reason to believe that a non-genuine replacement airbag may have been installed. Vehicles with salvage or rebuilt titles, prior airbag deployments, or unknown repair histories may present a higher risk. NHTSA strongly cautions against self-inspection by vehicle owners and recommends inspection by trained technicians.

NHTSA · メーカー通報11032523モデルイヤー 2002原文(英語)で表示中 · 翻訳待ち詳細を見る →
XG III · 1998–2005
技術通報中程度内装NA

技術通報

The National Highway Traffic Safety Administration (NHTSA) has issued an urgent safety advisory regarding dangerous, counterfeit driverside airbag inflators manufactured by Jilin Province Detiannuo Automobile Safety System Co., Ltd. (DTN), that have been identified in U.S. vehicles following prior crashes, theft, or noncertified airbag replacements. These inflators are not approved for use, may rupture during deployment, and have caused serious injuries and fatalities. Please see attached announcement, provided by NHTSA, for more details.

NHTSA · メーカー通報11032522モデルイヤー 2002原文(英語)で表示中 · 翻訳待ち詳細を見る →
XG III · 1998–2005
技術通報軽微ボディNA

技術通報

This bulletin contains information about the proper removal of the windshield wiper blade protective cover on all models. If the protective cover is not removed correctly, there is a possibility of the rubber insert and rail spring becoming partially separated on the inner side of the wiper blade, which could lead to poor wiping performance and/or possible scratching of the windshield glass. Follow the procedure in this bulletin to properly remove the windshield wiper blade protective cover on all new wiper blades.

NHTSA · メーカー通報10251285モデルイヤー 2004原文(英語)で表示中 · 翻訳待ち詳細を見る →

最新のフォーラム

まだディスカッションはありません。

不具合とディスカッションは世代ごとに整理されています。投稿するには上で世代を選んでください。

出典:NHTSA(米国、パブリックドメイン)、カナダ運輸省(Open Government Licence – Canada)、DVSA(英国、Open Government Licence v3.0)、RappelConso および EU Safety Gate(フランス、Licence Ouverte 2.0)、国土交通省(日本、公共データ利用規約1.0)、韓国国土交通部(car.go.kr)。