閲覧無料 · 投稿は無料アカウントでAnticars(2000年)の後継

Infiniti EX

2007–2025 · 2 世代 · 不具合4件 · 5市場
世代

Infiniti EX のすべての世代をまとめて:不具合、リコール、サービス情報、ディスカッション。世代を選ぶと絞り込めます。

重大な不具合

すべて表示 (4) →
m
重大内装NAEX I · 2007–2013

Airbags: problems reported by owners

21 owners in the United States reported problems with the airbags of this car to NHTSA (model years 2008–2012), typically at around 82,000 miles. Reported consequences: 3 crashes, 3 injuries.

✓ 公的データに基づくMecafileの分析2008–2012原文(英語)で表示中 · 翻訳待ち詳細を見る →

最新の公式リコール

すべて表示 (8) →
EX I · 2007–2013
EX I · 2007–2013
リコール中程度サスペンションNA

Steering

On certain vehicles, the steering column upper bearing retainer may fail due to a manufacturing defect. if this occurs, the upper bearing may experience additional stress causing excessive play in the steering wheel. This could result in vehicle instability and increase the risk of injury and/or damage to property. Correction: Dealers will replace steering shaft on EX35/FX35/45 and replace steering column assembly on GT-R.

カナダ運輸省2015年2月11日2015060モデルイヤー 2008原文(英語)で表示中 · 翻訳待ち詳細を見る →
EX I · 2007–2013
リコール重大サスペンションNA

Steering:Column

Nissan North America, Inc. (Nissan) is recalling certain model year 2008 Infiniti EX35 vehicles equipped with the power tilt/telescope option included in the premium package, manufactured June 29, 2007, to April 25, 2008, 2009 Infiniti FX35 and FX45 vehicles manufactured October 31, 2007, to April 16, 2008, and 2009 Nissan GT-R vehicles manufactured March 14, 2007, to April 25, 2008. The steering column outer tube may not be round, resulting in extra stress being applied to the upper steering bearing. This stress may cause the bearing retainer to fracture, creating extra play in the steering wheel or a possible loss of steering.

NHTSA · 米国2015年2月2日15V054000モデルイヤー 2008原文(英語)で表示中 · 翻訳待ち詳細を見る →

最新の技術サービス通報

すべて表示 (34) →
EX I · 2007–2013
技術通報軽微その他NA

技術通報

TELEMATICS CONTROL UNIT RESET AFTER AUTOMATIC COLLISION NOTIFICATION SERVICE INFORMATION The Telematics Control Unit (TCU) has the ability to send an automatic collision notification when the vehicle is involved in an accident. Once an automatic collision notification is performed, the function becomes disabled and the TCU must be reset to re-enable the automatic collision notification function. Some models will store DTC B2E1B-97 for Automatic eCAll locked as CURRENT when this function is disabled. This bulletin describes how to reset the TCU after an automatic collision notification has been performed. For models with B2E1B-97 for Automatic eCAll locked set as CURRENT, complete the SERVICE PROCEDURE starting on page 2, and then erase DTCs after confirming the TCU condition is UNLOCK.

NHTSA · メーカー通報11006966モデルイヤー 2012原文(英語)で表示中 · 翻訳待ち詳細を見る →
EX I · 2007–2013
技術通報軽微電装NA

技術通報

BATTERY QUICK CHARGE NOTICE SERVICE INFORMATION When charging the vehicles 12 volt battery with the high amperage quick charge function, the ignition should never be ON, or turned ON, while charging. Attempting to start the vehicle, or turning the ignition ON, while using the high amperage quick charge could potentially damage the fuel pump control module. Only turn the ignition ON when either the ESM or a technical service bulletin service procedure states to do so, and only while using a battery maintainer or smart charger set to reflash mode, or a similar setting. Battery voltage should not exceed 16V during a reprograming operation.

NHTSA · メーカー通報10208943モデルイヤー 2013原文(英語)で表示中 · 翻訳待ち詳細を見る →
EX I · 2007–2013
技術通報軽微電装NA

技術通報

CLEANING FRONT OR REAR COMBINATION LAMP ASSEMBLIES This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.

NHTSA · メーカー通報10206343モデルイヤー 2013原文(英語)で表示中 · 翻訳待ち詳細を見る →

最新のフォーラム

まだディスカッションはありません。

不具合とディスカッションは世代ごとに整理されています。投稿するには上で世代を選んでください。

出典:NHTSA(米国、パブリックドメイン)、カナダ運輸省(Open Government Licence – Canada)、DVSA(英国、Open Government Licence v3.0)、RappelConso および EU Safety Gate(フランス、Licence Ouverte 2.0)。