Flash: Drivetrain Control Module (DTCM) Updates Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must SYMPTOM: exhibit/set the following Diagnostic Trouble Code (DTC): C147B-92 - Front Axle Disconnect Sensor Performance or Incorrect Operation. Customers may comment on one or more of the following: 4WD system warning lights, service messages, or flashing indicators are displayed in the Instrument Panel Cluster (IPC). The vehicle does not engage 4WD properly. This bulletin involves reprogramming the DTCM with the latest available software.
Flash: Drivetrain Control Module (DTCM) Updates Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must SYMPTOM: exhibit/set the following Diagnostic Trouble Code (DTC): C147B-92 - Front Axle Disconnect Sensor Performance or Incorrect Operation. Customers may comment on one or more of the following: 4WD system warning lights, service messages, or flashing indicators are displayed in the Instrument Panel Cluster (IPC). The vehicle does not engage 4WD properly. This bulletin involves reprogramming the DTCM with the latest available software.
Flash: Drivetrain Control Module (DTCM) Updates Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must SYMPTOM: exhibit/set the following Diagnostic Trouble Code (DTC): C147B-92 - Front Axle Disconnect Sensor Performance or Incorrect Operation Customers may comment on one or more of the following: 4WD system warning lights, service messages, or flashing indicators are displayed in the Instrument Panel Cluster (IPC). The vehicle does not engage 4WD properly. This bulletin involves reprogramming the DTCM with the latest available software.
Flash: Drivetrain Control Module (DTCM) Updates Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must SYMPTOM: exhibit/set the following Diagnostic Trouble Code (DTC): C147B-92 - Front Axle Disconnect Sensor Performance or Incorrect Operation Customers may comment on one or more of the following: 4WD system warning lights, service messages, or flashing indicators are displayed in the Instrument Panel Cluster (IPC). The vehicle does not engage 4WD properly. This bulletin involves reprogramming the DTCM with the latest available software.
Flash: Drivetrain Control Module (DTCM) Updates Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must SYMPTOM: exhibit/set the following Diagnostic Trouble Code (DTC): C147B-92 - Front Axle Disconnect Sensor Performance or Incorrect Operation Customers may comment on one or more of the following: 4WD system warning lights, service messages, or flashing indicators are displayed in the Instrument Panel Cluster (IPC). The vehicle does not engage 4WD properly. This bulletin involves reprogramming the DTCM with the latest available software.
Flash: Drivetrain Control Module (DTCM) Updates Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must SYMPTOM: exhibit/set the following Diagnostic Trouble Code (DTC): C147B-92 - Front Axle Disconnect Sensor Performance or Incorrect Operation Customers may comment on one or more of the following: 4WD system warning lights, service messages, or flashing indicators are displayed in the Instrument Panel Cluster (IPC). The vehicle does not engage 4WD properly. This bulletin involves reprogramming the DTCM with the latest available software.
Flash: Drivetrain Control Module (DTCM) Updates Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must SYMPTOM: exhibit/set the following Diagnostic Trouble Code (DTC): C147B-92 - Front Axle Disconnect Sensor Performance or Incorrect Operation Customers may comment on one or more of the following: 4WD system warning lights, service messages, or flashing indicators are displayed in the Instrument Panel Cluster (IPC). The vehicle does not engage 4WD properly. This bulletin involves reprogramming the DTCM with the latest available software.
Flash: Drivetrain Control Module (DTCM) Updates Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must SYMPTOM: exhibit/set the following Diagnostic Trouble Code (DTC): C147B-92 - Front Axle Disconnect Sensor Performance or Incorrect Operation Customers may comment on one or more of the following: 4WD system warning lights, service messages, or flashing indicators are displayed in the Instrument Panel Cluster (IPC). The vehicle does not engage 4WD properly. This bulletin involves reprogramming the DTCM with the latest available software.
Flash: Drivetrain Control Module (DTCM) Updates Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must SYMPTOM: exhibit/set the following Diagnostic Trouble Code (DTC): C147B-92 - Front Axle Disconnect Sensor Performance or Incorrect Operation Customers may comment on one or more of the following: 4WD system warning lights, service messages, or flashing indicators are displayed in the Instrument Panel Cluster (IPC). The vehicle does not engage 4WD properly. This bulletin involves reprogramming the DTCM with the latest available software.
Flash: Drivetrain Control Module (DTCM) Updates Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must SYMPTOM: exhibit/set the following Diagnostic Trouble Code (DTC): C147B-92 - Front Axle Disconnect Sensor Performance or Incorrect Operation Customers may comment on one or more of the following: 4WD system warning lights, service messages, or flashing indicators are displayed in the Instrument Panel Cluster (IPC). The vehicle does not engage 4WD properly. This bulletin involves reprogramming the DTCM with the latest available software.
Flash: Drivetrain Control Module (DTCM) Updates Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must SYMPTOM: exhibit/set the following Diagnostic Trouble Code (DTC): C147B-92 - Front Axle Disconnect Sensor Performance or Incorrect Operation Customers may comment on one or more of the following: 4WD system warning lights, service messages, or flashing indicators are displayed in the Instrument Panel Cluster (IPC). The vehicle does not engage 4WD properly. This bulletin involves reprogramming the DTCM with the latest available software.
Flash: Drivetrain Control Module (DTCM) Updates Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must SYMPTOM: exhibit/set the following Diagnostic Trouble Code (DTC): C147B-92 - Front Axle Disconnect Sensor Performance or Incorrect Operation Customers may comment on one or more of the following: 4WD system warning lights, service messages, or flashing indicators are displayed in the Instrument Panel Cluster (IPC). The vehicle does not engage 4WD properly. This bulletin involves reprogramming the DTCM with the latest available software.
Flash: Powertrain Control Module (PCM) Updates Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must SYMPTOM: exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs): **P0300 - Multiple Cylinder Misfire (Active or Stored status set during cold start catalyst heating). P0301 - Cylinder 1 Misfire (Active or Stored status set during cold start catalyst heating). P0302 - Cylinder 2 Misfire (Active or Stored status set during cold start catalyst heating). P0303 - Cylinder 3 Misfire (Active or Stored status set during cold start catalyst heating). P0304 - Cylinder 4 Misfire (Active or Stored status set during cold start catalyst heating). P0305-00 - Cylinder 5 Misfire (Active or Stored status set during cold start catalyst heating). P0306-00 - Cylinder 6 Misfire (Active or Stored status set during cold start catalyst heating).** P08A6 - Gear Lever Position Sensor System - Multiple Sensor Correlation. P152F - Engine Hood Switch 2 / Engine Hood Switch 1 Correlation. P1129 - Closed Loop Fueling Not Achieved - Bank 2 Upstream. P0152-02 - O2 Sensor 2/1 Circuit High. P0158-02 - O2 Sensor 2/2 Circuit High. P2504 - Charging System Output High. P0563 - Battery/System Voltage High. Customers may also comment on one or more of the following: **The vehicle has a rough idle. The engine has a miss. Noisy valvetrain. "Service Transmission" message in the Instrument Panel Cluster (IPC) due to clutch slip detection with the transfer case in neutral. NOTE: Some customers may experience wheel spin or traction loss. In these situations, the Powertrain Control Module (PCM) may interpret the event as excessive clutch slip. To prevent potential clutch damage, a message may be displayed in the Instrument Panel Cluster (IPC).** Clutch is overheating. Clutch is slipping on engagement. M18 FSAR-TSB-7161 -2- Inability to accelerate uphill. Vehicle does not start. Vehicle is stuck in limp-home mode
Flash: Comfort Seat And Wheel (CSWM) Updates The customer may experience the following: SYMPTOM: Heated Steering Wheel does not get hot enough or does not work. This bulletin involves reprogramming the CSWM with the latest available software.
Flash: Comfort Seat And Wheel (CSWM) Updates The customer may experience the following: SYMPTOM: Heated Steering Wheel does not get hot enough or does not work. This bulletin involves reprogramming the CSWM with the latest available software.
Flash: Comfort Seat And Wheel (CSWM) Updates The customer may experience the following: SYMPTOM: Heated Steering Wheel does not get hot enough or does not work. This bulletin involves reprogramming the CSWM with the latest available software.
Flash: Comfort Seat And Wheel (CSWM) Updates The customer may experience the following: SYMPTOM: Heated Steering Wheel does not get hot enough or does not work. This bulletin involves reprogramming the CSWM with the latest available software.
Flash: Comfort Seat And Wheel (CSWM) Updates The customer may experience the following: SYMPTOM: Heated Steering Wheel does not get hot enough or does not work. This bulletin involves reprogramming the CSWM with the latest available software.
Flash: Comfort Seat And Wheel (CSWM) Updates The customer may experience the following: SYMPTOM: Heated Steering Wheel does not get hot enough or does not work. This bulletin involves reprogramming the CSWM with the latest available software.
Flash: Comfort Seat And Wheel (CSWM) Updates The customer may experience the following: SYMPTOM: Heated Steering Wheel does not get hot enough or does not work. This bulletin involves reprogramming the CSWM with the latest available software.
Flash: Comfort Seat And Wheel (CSWM) Updates The customer may experience the following: SYMPTOM: Heated Steering Wheel does not get hot enough or does not work. This bulletin involves reprogramming the CSWM with the latest available software.
Flash: Powertrain Control Module (PCM) Updates Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must SYMPTOM: exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs): P08A6 Gear Lever Position Sensor System Multiple Sensor Correlation (Manual Transmission Only). P152F Engine Hood Switch 2 / Engine Hood Switch 1 Correlation. Customers may also comment on one or more of the following: "Service Transmission message on in the Instrument Panel Cluster (IPC) due to clutch slip detection (Manual Transmission Only). NOTE: Customers might experience wheel spin or slippage and the PCM could interpreted the wheel spin or slippage as slipping the clutch too much and to avoid clutch damage, the customer may see the message in the IPC. Vehicle is in limp home mode. Other software enhancements included: Engine oil pump in high pressure mode with cold engine oil to improve valvetrain component reliability. This bulletin involves reprogramming the PCM with the latest available software.
Flash: Powertrain Control Module (PCM) Updates Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must SYMPTOM: exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs): P08A6 - Gear Lever Position Sensor System Multiple Sensor Correlation (Manual Transmission Only). P152F - Engine Hood Switch 2 / Engine Hood Switch 1 Correlation. P0300 - Multiple Cylinder Misfire. P152E - Engine Hood Switch 2 Circuit High. P0032 - O2 Sensor 1/1 Heater Circuit High. P0038 - O2 Sensor 1/2 Heater Circuit High. P0052 - O2 Sensor 2/1 Heater Circuit High. P0058 - O2 Sensor 2/2 Heater Circuit High. P0132 - O2 Sensor 1/1 Circuit High. P0138 - O2 Sensor 1/2 Circuit High. P0152 - O2 Sensor 2/1 Circuit High. P0158 - O2 Sensor 2/2 Circuit High. P2100 - Electronic Throttle Control Motor Circuit Customers may also comment on one or more of the following: "Service Transmission message on in the Instrument Panel Cluster (IPC) due to clutch slip detection (Manual Transmission Only). NOTE: Customers might experience wheel spin or slippage and the PCM could interpreted the wheel spin or slippage as slipping the clutch too much and to avoid clutch damage, the customer may see the message in the IPC. Vehicle is in limp home mode. Spark knock/detonation sound from the engine at idle. Other software enhancements included: Engine oil pump in high pressure mode with cold engine oil to improve valvetrain component reliability. This bulletin involves reprogramming the PCM with the latest available software.
Flash: Powertrain Control Module (PCM) Updates Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs): **P08A6 Gear Lever Position Sensor System Multiple Sensor Correlation (Manual Transmission Only). P152F Engine Hood Switch 2 / Engine Hood Switch 1 Correlation.** P0300 - Multiple Cylinder Misfire. P152E - Engine Hood Switch 2 Circuit High. P0032 - O2 Sensor 1/1 Heater Circuit High. P0038 - O2 Sensor 1/2 Heater Circuit High P0052 - O2 Sensor 2/1 Heater Circuit High P0058 - O2 Sensor 2/2 Heater Circuit High. P0132 - O2 Sensor 1/1 Circuit High. P0138 - O2 Sensor 1/2 Circuit High. P0152 - O2 Sensor 2/1 Circuit High. P0158 - O2 Sensor 2/2 Circuit High P2100 - Electronic Throttle Control Motor Circuit Customers may also comment on one or more of the following: **"Service Transmission message on in the Instrument Panel Cluster (IPC) due to clutch slip detection (Manual Transmission Only). NOTE: Customers might experience wheel spin or slippage and the PCM could interpreted the wheel spin or slippage as slipping the clutch too much and to avoid clutch damage, the customer may see the message in the IPC. Vehicle is in limp home mode.** Spark knock/detonation sound from the engine at idle. **Other software enhancements included: Engine oil pump in high pressure mode with cold engine oil to improve valvetrain component reliability.** This bulletin involves reprogramming the PCM with the latest available software.
Flash: Powertrain Control Module (PCM) Updates Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs): P08A6 Gear Lever Position Sensor System Multiple Sensor Correlation (Manual Transmission Only). P152F Engine Hood Switch 2 / Engine Hood Switch 1 Correlation. Customers may also comment on one or more of the following: "Service Transmission message on in the Instrument Panel Cluster (IPC) due to clutch slip detection (Manual Transmission Only). NOTE: Customers might experience wheel spin or slippage and the PCM could interpreted the wheel spin or slippage as slipping the clutch too much and to avoid clutch damage, the customer may see the message in the IPC. Vehicle is in limp home mode. Other software enhancements included: Engine oil pump in high pressure mode with cold engine oil to improve valvetrain component reliability. This bulletin involves reprogramming the PCM with the latest available software.
出典:NHTSA(米国、パブリックドメイン)、カナダ運輸省(Open Government Licence – Canada)、DVSA(英国、Open Government Licence v3.0)、RappelConso および EU Safety Gate(フランス、Licence Ouverte 2.0)、国土交通省(日本、公共データ利用規約1.0)、韓国国土交通部(car.go.kr)。