Bij 2,8% van de APK-keuringen van deze auto in Nederland werd dit gebrek vastgesteld (157 van 5.594 keuringen in de afgelopen 12 maanden): 2,1 keer zo vaak als bij auto's van dezelfde leeftijd.
Bij 5,3% van de APK-keuringen van deze auto in Nederland werd dit gebrek vastgesteld (704 van 13.321 keuringen in de afgelopen 12 maanden): 84,4 keer zo vaak als bij auto's van dezelfde leeftijd.
12% of periodic inspections of this car in Finland found a fault on this item serious enough to fail the car (166 faults in 1,424 inspections in 2025): 3.0 times as often as cars of the same age.
Bij 8,6% van de APK-keuringen van deze auto in Nederland werd dit gebrek vastgesteld (1.137 van 13.269 keuringen in de afgelopen 12 maanden): 4,9 keer zo vaak als bij auto's van dezelfde leeftijd.
On affected vehicles improper programming of the combination meter display may cause the display to become inoperable and remain blank. This prevents the speedometer from being visible.
L’écrou et la vis inférieure de fixation de l’amortisseur à la mâchoire de direction pourraient devenir lâches, conduisant à son détachement. cela pourrait entraîner une perte de contrôle sur le véhicule ou une altération de la stabilité au volant, ce qui pourrait augmenter le risque d’accident.
Some customers may complain about any of the following 1. Infotainment Center Display does not provide the Authorization Code (OTP) during the MyMazda App Connected Vehicle enrollment. 2. Remote function(s) inoperative.
Some vehicles may exhibit the check engine light ON with DTC P0300:00 (Random misfire detected) stored. This may be caused by a mis-detection of a misfire due to improper PCM control logic. To eliminate this concern, the PCM control logic has been modified.
Some customers may notice the charging lamp turns on while driving. Upon inspection, DTC P2502:00 PCM (Malfunction in voltage generated by generator) is stored in memory. This may be caused by resistance between the circuit board and ground. When high intensity electrical current passes through, the ground terminal position may not be sufficient enough. To eliminate this concern, the DC-DC converter control software has been modified. Additionally, the production procedure has been revised. The tightening torque for the ground terminal and circuit board was increased.
出典:NHTSA(米国、パブリックドメイン)、カナダ運輸省(Open Government Licence – Canada)、DVSA(英国、Open Government Licence v3.0)、RappelConso および EU Safety Gate(フランス、Licence Ouverte 2.0)。