閲覧無料 · 投稿は無料アカウントでAnticars(2000年)の後継

Mercedes-BenzMercedes-Benz CLKクラス

1997–2008 · 2 世代 · 不具合34件 · 2市場
世代

Mercedes-Benz CLKクラス のすべての世代をまとめて:不具合、リコール、サービス情報、ディスカッション。世代を選ぶと絞り込めます。

重大な不具合

すべて表示 (34) →
m
重大トランスミッションNACLKクラス C208 · 1997–2002

Transmission and drivetrain: problems reported by owners

18 owners in the United States reported problems with the transmission and drivetrain of this car to NHTSA (model years 1999–2002), typically at around 70,000 miles. Most often named: automatic transmission (39%), automatic transmission:control module (tcm/pcm/tecm) (17%), automatic transmission:gear position indication (prndl) (17%). Reported consequences: 2 crashes, 1 fire.

✓ 公的データに基づくMecafileの分析1999–2002原文(英語)で表示中 · 翻訳待ち詳細を見る →
m

Airbags: problems reported by owners

10 owners in the United States reported problems with the airbags of this car to NHTSA (model years 1999–2002), typically at around 81,000 miles. Most often named: side/window (20%). Reported consequences: 7 crashes, 7 injuries.

✓ 公的データに基づくMecafileの分析1999–2002原文(英語)で表示中 · 翻訳待ち詳細を見る →

最新の公式リコール

すべて表示 (36) →
CLKクラス C209 · 2001–2008
リコール中程度ボディNA

Visibility:Sun/moon roof assembly

Mercedes-Benz USA, LLC (MBUSA) is recalling certain 2001-2011 C-Class, CLK, E-Class, and CLS vehicles. Please see the recall report for a complete list of models and model years. The glass sunroof panel may not be properly secured and can detach.

NHTSA · 米国2024年11月19日24V874000モデルイヤー 2003–2009原文(英語)で表示中 · 翻訳待ち詳細を見る →
CLKクラス C208 · 1997–2002CLKクラス C209 · 2001–2008
リコール中程度ボディJP

車体

スライディングルーフのガラスパネルにおいて、製造管理が不適切なため、接着強度が不十分なものがある。そのため、ガラスパネルに浮きが発生し、最悪の場合、走行風により脱落して、後続車両の妨げになるおそれがある。

国土交通省 · 日本2023年6月22日1236290モデルイヤー 2000–2009詳細を見る →
CLKクラス C208 · 1997–2002CLKクラス C209 · 2001–2008

最新の技術サービス通報

すべて表示 (94) →
CLKクラス C209 · 2001–2008
技術通報軽微ボディNA

技術通報

**苦情**: ドア内のスピーカー付近からカチャカチャという異音がする。 **原因**: 調査中。 **対策**: 原因を絞り込むため、まずドアトリムを取り外してください。ドアトリムを取り外しても異音が続く場合は、スピーカーに向けて診断を続けてください。必要に応じて、わかりやすい動画を添付してTIPSケースを作成してください。 **注意**: 保証請求の際はこの文書を参照してください。診断完了後、問題の原因となっている部品に応じてダメージコードを選択してください。ドアトリムを取り外すと異音が止まる場合は、LI72.10P067691に従って対応してください。 **情報**: 今回のケースでは、保証請求にスピーカーのダメージコードを使用しないでください。

NHTSA · メーカー通報11038217モデルイヤー 2007–2008自動翻訳 · 原文:英語詳細を見る →
CLKクラス C209 · 2001–2008
技術通報中程度ブレーキNA

技術通報

**症状** 60MPHからのブレーキ時に車両振動が発生するため、再度ワークショップに入庫。 **注意** タイヤやホイールの振動と似た症状ですが、常に発生するのか、ブレーキ時のみ発生するのかによって、通常は明らかに異なることがわかります。 **原因** 振動の原因は、ローターやハブ/ホイールベアリングの過度な横振れである可能性が最も高いものの、他の要因がないかシステム全体を点検する必要があります。 1. 過去の衝突による損傷。 2. 回転部品を動かさずに車両を長期間放置していたこと。 3. ホイールベアリング/ハブの横振れ。 4. ホイール取付け面が過度に締め付けられている(WISの締付け手順に従っていない)。 5. 取付け面が過度に改造されている(塗装、傷、曲がりなど)。 **対策** 作業を行う前に、添付のワークシート全体に目を通してください。作業後は、最終ページを確認し、それに従って作業を進めてください。 注意:本書は事前承認や保証の取扱いを意味するものではありません。診断目的のみを意図しています。作業の進め方に疑問がある場合、またはワークシートの作業を実施した後も同じ症状で車両が戻ってきた場合は、ワークシートに記載された測定を再度行い、Body、Chassis、Entertainmentチームに対してTIPSケースを起票してください。

NHTSA · メーカー通報11038186モデルイヤー 2007–2008自動翻訳 · 原文:英語詳細を見る →
CLKクラス C209 · 2001–2008
技術通報中程度ブレーキNA

技術通報

Complaint Noises/ squealing from the service brake in various driving situations and ambient conditions. Cause Frictional vibrations Remedy The intent of this document is to reduce noise from high performance AMG brakes. AMG brakes are designed for performance under high load and in certain scenarios, can emit noise. Some scenarios are normal and some are induced by driving style like those listed below: Driving style such as two footed driving where the pad might be in constant contact with the rotor. Brake pressure and application style (stopandgo traffic with consistent light brake pressure riding brakes where the brakes cannot cool sufficiently between applications). This can cause the brake pads to glaze and have a smooth/glassy surface which can induce noise. When ambient temperatures rise during summer peak and during cooling and cold winter months. 1. Beginning Diagnostics: a) Check whether the complaint can be reproduced and at which axle or side the noises occur (ideally together with the customer while driving). b) Check the affected system for component wear, mechanical damage or localized overheating damage. Replace damaged components as necessary. c) Assess condition of brake rotors and pads per WIS and visually (i.e. long periods of stagnation, etc...). d) Clean brake components free of brake dust and debris. d) Secure vehicle on a lift. 1. Start the engine and depress the brake pedal 34 times. 2. Check each wheel to see if they turn freely by hand. 3. If a wheel is not turning freely by hand, this needs to be addressed prior to reassessing the noise concern. e) Check whether, apart from this document, an additional document exists for the specific model in question, and if so, work through it and then continue. 2. Specific Axle Work: NOTE: If the brake pad has a metal backing plate, there is no need to affix the adhesive film. Continue with applying chamfer and Molykote as instructed below. IMPORTANT: Be absolutely certain to not allow paste between friction surfaces of the pad and disc! a) If the noises are coming from the front axle. 1. Remove brake linings of front axle. 2. Clean all contact points on brake lining backing plate, including the brake lining guide pins and brake caliper/carrier. 3. Clean bonding surface (where pistons contact back of brake pad). Apply adhesive film to the backplate of the pistonside brake lining where the piston contacts the pad backing plate. See picture "Adhesive and Paste Application Area". 4. Be sure to remove both brown paper backing sides of the adhesive film, it is double sided adhesive film. 5. If adhesive is already installed on backing plate where pistons contact the back of the pad, you may gently scrape off and reapply a new adhesive or Molykote. Must not apply the Molykote on top of the adhesive. 6. Chamfer edges (gently round off sharp leading edges) on brake pads. Some pads have vertical grooves, these can be gently chamfered with a triangular file as well. See picture "Chamfering Technique". 7. Apply Molykote to the sides of the backing plate. See picture "Adhesive and Paste Application Area". 8. After installing the brake linings, actuate the brake for 30 seconds. b) If the noises are coming from the rear axle. 1. Remove brake pads of rear axle. 2. Clean all contact points on brake lining backing plate and brake caliper /carrier. 3. Clean bonding surface (where pistons contact back of brake pad). Apply adhesive film to the backplate of the pistonside brake lining. 4. Chamfer edges (round off sharp leading edges) on brake pads. See picture "Chamfering Technique". 5. Grease contact points (red areas on attachment "Rear Pad Grease Area") between brake lining and guide of brake caliper with Molykote. 3. Brake Bedding Process: a) Before trip, the mileage incurred must be clarified with the customer (approx. 30 miles). b) Select a suitable route so speeds of approximately 65 MPH can be achieved. c) If the vehicle is an AMG P3 Hybrid, switch off

NHTSA · メーカー通報11037487モデルイヤー 2008原文(英語)で表示中 · 翻訳待ち詳細を見る →

最新のフォーラム

まだディスカッションはありません。

不具合とディスカッションは世代ごとに整理されています。投稿するには上で世代を選んでください。

出典:NHTSA(米国、パブリックドメイン)、カナダ運輸省(Open Government Licence – Canada)、DVSA(英国、Open Government Licence v3.0)、RappelConso および EU Safety Gate(フランス、Licence Ouverte 2.0)、国土交通省(日本、公共データ利用規約1.0)、韓国国土交通部(car.go.kr)。