104 owners in the United States reported problems with the fuel system of this car to NHTSA (model years 1989–1993), typically at around 134,000 miles. Most often named: fuel injection system:injectors (22%), storage:tank assembly:filler pipe and cap (22%), fuel injection system (18%). Reported consequences: 1 crash, 4 fires.
49 owners in the United States reported problems with the engine and cooling of this car to NHTSA (model years 1989–1993), typically at around 87,000 miles. Most often named: engine:gasoline (41%), engine (33%), exhaust system:manifold/header/muffler/tail pipe (18%). Reported consequences: 1 crash, 2 fires.
41 owners in the United States reported problems with the seat belts of this car to NHTSA (model years 1989–1993), typically at around 134,000 miles. Most often named: front:anchorage (22%), front:retractor (17%). Reported consequences: 14 crashes, 20 injuries.
It is possible for a mixture of mud and salt to get trapped between the fuel filler tube and wheel housing. The trapped mud and salt can result in corrosion of the fuel filler tube and the wheel housing.
The clear coat on the aluminum wheels may be thicker than desired. Wheel nuts on a wheel with excessive clear coating may loosen over time because the clear coat layer compresses under load. If the vehicle is operated with wheel nuts that have loosened, then one or more hub bolts may break, and the wheel may come off the vehicle. Correction: The clear coating will be removed from the brake rotor mating surface on the back of each wheel, and from the wheel nut mating surfaces. Wheels, hub bolts and nuts will be inspected and replaced if necessary.
The aluminum wheels were clear coated several times to protect the metal finish. Some excessive coating can leave the wheel nuts an excessive distance from the wheel hub when tightened, allowing them to loosen over time.
出典:NHTSA(米国、パブリックドメイン)、カナダ運輸省(Open Government Licence – Canada)、DVSA(英国、Open Government Licence v3.0)、RappelConso および EU Safety Gate(フランス、Licence Ouverte 2.0)。