139 owners in the United States reported problems with the fuel system of this car to NHTSA (model years 2000–2004), typically at around 74,000 miles. Most often named: delivery:fuel pump (35%). Reported consequences: 3 crashes, 5 fires.
81 owners in the United States reported problems with the engine and cooling of this car to NHTSA (model years 2000–2004), typically at around 65,000 miles. Most often named: exhaust system:manifold/header/muffler/tail pipe (22%), engine:gasoline (17%), engine (16%). Reported consequences: 1 crash, 4 fires, 3 injuries.
71 owners in the United States reported problems with the electrical system of this car to NHTSA (model years 2000–2004), typically at around 76,000 miles. Most often named: wiring (18%). Reported consequences: 3 crashes, 12 fires, 2 injuries.
On certain vehicles, corrosion may form in the lower steering column joint and limit the movement of the joint. Limited movement of this joint may create excessive load on the lower steering column shaft and, if the vehicle continues to be driven in this condition, may lead to cracking of the shaft during low speed manoeuvres that require large steering inputs. In an extreme case, the shaft may break which would result in loss of steering control and could result in a crash. Correction: Dealers will replace the affected column shafts and joints.
Nissan is recalling certain model year 2002-2004 frontier vehicles manufactured from july 9, 2001 through october 20, 2004, and model year 2002-2004, xterra vehicles manufactured from july 9, 2001, through january 6, 2005. Over time corrosion may form in the lower steering column joint and limit movement of the joint. The limited movement of this joint may create excessive load on the lower steering column shaft. If the vehicle continues to be driven in this condition, it may lead to cracking of the shaft during low speed maneuvers that require large steering inputs.
On certain vehicles the Intelligent Power Distribution Module (IPDM) assembly contains an Engine Control Module (ECM) relay that has a diode for electrical current noise reduction. The ECM relay may allow silicon vapor to form and over time the silicon evaporates from the diode molding which causes silicon oxide to develop on the ECM relay contact due to arcing. In certain instances, this oxidation could cause engine performance issues (hesitation, rough engine idle, slow start/no-start condition), and engine stalling at low engine speeds which may result in a crash. Correction: Dealers will replace the Engine Control Module (ECM) relay.
VOLUNTARY SERVICE CAMPAIGN FRONT DIFFERENTIAL SIDE FLANGE MOUNTING BOLT Service Campaign ID # P4134 is no longer active. Repair orders opened after this bulletins published date are no longer eligible for reimbursement under Campaign ID # P4134. Please discard all previous versions of NTB04-095.
出典:NHTSA(米国、パブリックドメイン)、カナダ運輸省(Open Government Licence – Canada)、DVSA(英国、Open Government Licence v3.0)、RappelConso および EU Safety Gate(フランス、Licence Ouverte 2.0)、国土交通省(日本、公共データ利用規約1.0)、韓国国土交通部(car.go.kr)。