on a certain number of Antara (RHD) with 2.0L Diesel Engine Model Year 2007 - 2010 there is a potential for a fuel leak caused by a partial or complete disconnection of a fuel feed hose connector. This fuel leak leads to engine stalling and in a worst case it might potentially result in an engine bay fire. This fuel leak leads to engine stalling and in a worst case it might potentially result in an engine bay fire. No reported cases of fires.
In order for proper regeneration of the Diesel Particle Filter (DPF) system the vehicle in the active regeneration mode directs the driver by illuminating the DPF warning light to drive the vehicle at constant speed without interruption until the DPF warning light turns off. In the event that the driver ignores the DPF warning light and the corresponding direction the DPF system as well as exhaust pipe will be abnormally overheated. This may cause a fire at the Lower Engine Compartment Cover located near the DPF system and exhaust pipe.
The intermediate steering shaft may not be correctly coupled to the steering column which in certain driving conditions could result in disconnection and loss of steering control.
Repeated key insertion could create intense wear condition on the trigger of the ignition cylinder internal component. As consequence Engine starter motor might self-crank and the vehicle moves involuntarily if the ignition key has been left in the ignition lock cylinder in the LOCK (OFF) position and a gear engaged. The concern only affects vehicles with manual transmission.
null There is a possibility of the vehicle starting unintentionally when the ignition key is in the 'off' position in the ignition lock, in which case the starter motor may be activated if the vehicle is in gear, so that the vehicle starts to move. This could lead to persons, in particular outside the vehicle, being injured.
It is possible that a number of vehicles may have had the brake system filled with the incorrect brake fluid which can cause corrosion in the hydraulic ABS modulator. This can cause internal valves to stick which can result in possible longer brake pedal travel. In extreme cases this could result in increased brake pedal travel and stopping distances.
null Incorrect brake fluid might cause corrosion in the hydraulic ABS unit leading to a sticking valve and resulting in a longer brake pedal travel and a longer stopping distance, which may cause an accident, resulting in injuries to the passengers.
出典:NHTSA(米国、パブリックドメイン)、カナダ運輸省(Open Government Licence – Canada)、DVSA(英国、Open Government Licence v3.0)、RappelConso および EU Safety Gate(フランス、Licence Ouverte 2.0)、国土交通省(日本、公共データ利用規約1.0)、韓国国土交通部(car.go.kr)。