29 owners in the United States reported problems with the automatic emergency braking of this car to NHTSA (model years 2018–2021), typically at around 30,000 miles. Most often named: warnings (52%), automatic emergency braking (41%), adaptive cruise control (31%). Reported consequences: 2 crashes, 4 injuries.
11 owners in the United States reported problems with the accelerator and cruise control of this car to NHTSA (model years 2018–2021), typically at around 90,000 miles. Reported consequences: 1 crash, 1 injury.
357 owners in the United States reported problems with the transmission and drivetrain of this car to NHTSA (model years 2018–2022), typically at around 80,000 miles. Reported consequences: 4 crashes, 3 injuries.
56 owners in the United States reported problems with the engine of this car to NHTSA (model years 2018–2021), typically at around 39,000 miles. Reported consequences: 1 injury.
Issue: On certain vehicles, under certain conditions, a software problem in the battery electric vehicle control unit (BEV ECU) could cause the electric drive system to shut down while driving. If this happens, there could be a sudden loss of power to the wheels. Safety Risk: A sudden loss of power to the wheels could increase the risk of a crash. Corrective Actions: To reduce the safety risk, Toyota advises that you should limit the vehicle's maximum state of charge to no more than 80% until the recall repairs have been completed. Toyota will notify owners by mail and advise you to take your vehicle to a dealership to update the BEV ECU software.
Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2026 C-HR battery electric vehicles. A software programming error may cause the electric drive system battery to become overcharged under certain driving conditions, which can shut down the electric drive system and result in a loss of drive power.
For certain vehicles equipped with a Parking Assist ECU a component of the Panoramic View Monitor (PVM) system that displays the rear view image the software may cause the rear view image to freeze or not display
Pre-Delivery Service (PDS) is a critical step in satisfying our new car customers. Customer feedback indicates the following areas deserve special attention when performing PDS: Careful inspection for paint chips/scratches and body dents/dings. Proper operation of electrical accessories (including interior light, clock, and radio reset). Interior cleanliness. Proper function of mechanical systems. The PDS process helps identify potential vehicle concerns before customer delivery. After completing the PDS process, maintain accurate PDS records by ensuring the required documents listed below are completed and recorded in accordance with Toyota Warranty Policy. GTS+ Health Check Completed PDS Check Sheet Battery Charge Test Print Out GTS+ Tire Pressure Information Customer retention and proper maintenance of vehicles are and have always been a major focus for Toyota. To help remind customers that regular service is essential to the proper maintenance of the vehicle, dealers are required to install a service reminder sticker before delivery. By doing this, customers will be reminded to return to your dealership for service. Your current service reminder sticker may be used. This bulletin contains the PDS procedures that apply specifically to 2027 model year C-HR BEV vehicles
State of Health (SOH): An estimate of battery health that is updated as the vehicle learns from operating and charging conditions over time. Distance Since Last Update: Indicates the distance accumulated since the last SOH calculation. A default mileage value of 40,727 at SOH 100% may be displayed until sufficient vehicle learning is completed. Once SOH value updates from 100%, the Distance Since Last Update value will re-set to 0 miles. Both SOH and Distance Since Last Update values will continue to update as the vehicle continues to learn.
Some 2026 model year bZ, bZ Woodland, and C-HR BEV vehicles may exhibit the Diagnostic Trouble Code (DTC) U255221F associated with the level 3 DC fast charging. Under certain conditions, charging may either operate normally or experience failure, with a charging malfunction message displayed on the Multi-Information Display (MID). This condition is attributed to a control logic issue and potential voltage drop affecting Plug-In Charge Control Computer Assembly functionality. The control logic has been modified to reduce the possibility of this condition.
出典:NHTSA(米国、パブリックドメイン)、カナダ運輸省(Open Government Licence – Canada)、DVSA(英国、Open Government Licence v3.0)、RappelConso および EU Safety Gate(フランス、Licence Ouverte 2.0)、国土交通省(日本、公共データ利用規約1.0)、韓国国土交通部(car.go.kr)。