Airbags: problems reported by owners
10 owners in the United States reported problems with the airbags of this car to NHTSA (model years 1993–1994). Most often named: frontal (100%). Reported consequences: 8 crashes, 7 injuries.
🔔 無料アカウントを作成して Toyota サイノス (すべての世代) のメール通知を受け取る
Toyota サイノス のすべての世代をまとめて:不具合、リコール、サービス情報、ディスカッション。世代を選ぶと絞り込めます。
10 owners in the United States reported problems with the airbags of this car to NHTSA (model years 1993–1994). Most often named: frontal (100%). Reported consequences: 8 crashes, 7 injuries.
運転者席用エアバッグのインフレータ(膨張装置)において、吸湿防止が不適切なため、ガス発生剤が吸湿することがある。そのため、使用過程でガス発生剤が吸湿や乾燥を繰返した場合など、エアバッグ作動時に正常に展開しないおそれがある。
Issue: On certain vehicles, exposure to moisture over time could cause the driver-front airbag not to inflate properly in a crash. In some cases, this could cause an airbag not to fully inflate, while in others it could cause it to deploy with more force than normal. It could also cause the inflator to rupture. If the airbag inflator ruptures, small pieces of metal could be propelled toward vehicle occupants or cause damage to the airbag and prevent its proper function. Safety Risk: In a crash requiring an airbag deployment, the driver-front airbag may not inflate properly or the inflator could rupture. This could create a risk of injury. Corrective Actions: Toyota will notify owners by mail and instruct you to take your vehicle to a dealer to inspect, and if necessary, replace the front driver airbag inflator.
販売店オプションとして設定しているウォッシャ液凍結防止ヒータが装着された車両において、ヒータ制御回路部の防水用オーリングの締め代が不足しているため、ウォッシャ液が制御回路内に浸入することがある。そのため、制御回路が溶損し、最悪の場合、火災に至るおそれがある。
Toyota純正オイルシール サイドリップグリース は、ドライブシャフトの取り付け・取り外し時に何を防ぐために使用されますか? ? 水やほこりなどの侵入 ? シール性能の向上 ? 摺動抵抗の低減
TSB: TMNA アクセサリー販売・マーケティング部門は、2021年モデルのトヨタ車向けに、トヨタ製ペイントプロテクションフィルム(PPF)用デカール(特別に開発された軽粘着剤を使用)を開発しました。このデカールには2つのサイズ(2.8 in. x 8 in. と 4 in. x 8 in.)があり、小型・大型のフードに対応します。全シリーズのPPFの上面に、TLSアクセサリー取付施設で貼付されます。デカールは、納車時のディテール/洗車まではフィルムに貼付されたままとなることを意図しています。顧客への納車直前に、本速報の除去手順に従ってデカールと、粘着剤が残した残留物を除去してください。
TSB: 製造工程では、タイヤは引っ張りやドリフトなどの症状を抑えるため、マッチドセットとして車両に装着されています。製造・納車前にホイールを交換または再仕上げ(リフィニッシュ)する場合は、元のタイヤを同じ位置および同じ回転方向のまま車両に装着しておくことが重要です。元のタイヤが車両上の同じ位置に留まるようにするため、本TSBのタイヤ位置決め手順を参照してください。
不具合とディスカッションは世代ごとに整理されています。投稿するには上で世代を選んでください。
出典:NHTSA(米国、パブリックドメイン)、カナダ運輸省(Open Government Licence – Canada)、DVSA(英国、Open Government Licence v3.0)、RappelConso および EU Safety Gate(フランス、Licence Ouverte 2.0)。