閲覧無料 · 投稿は無料アカウントでAnticars(2000年)の後継

Toyota ターセル I

1978–1982 · 不具合2件 · 2市場

このファイルには、Toyota ターセル Iで知られている不具合を、コミュニティが出典付きでまとめています。閲覧は無料、投稿には無料アカウントが必要です。信頼できる投稿者が十分に確認した不具合にはシールが付きます。

重大な不具合

すべて表示 (2) →
m
中程度サスペンションNA

Broken stabilizer bar (US safety investigation)

NHTSA, the US road safety agency, opened a preliminary evaluation (PE89134) into this problem on 3 July 1989 for 1982 models; it was closed on 22 September 1989 without a recall.

✓ 公的データに基づくMecafileの分析1982原文(英語)で表示中 · 翻訳待ち詳細を見る →

最新の公式リコール

すべて表示 (2) →
リコール中程度サスペンションNA

Suspension:Rear

The lower control arms, which support the rear wheels, are subject to corrosion if operated in areas where a large amount of road salt is used to aid in snow and ice removal. Consequence of defect: Continuous exposure to road salt may cause corrosion failure of the lower control arm affecting vehicle operation; this could result in loss of control and an accident.

NHTSA · 米国1986年3月10日86V038000モデルイヤー 1980–1982原文(英語)で表示中 · 翻訳待ち詳細を見る →
リコール中程度サスペンションNA

Suspension

Vehicles located ontario, quebec and the maritime provinces. In areas of high corrosion, the rear control arm that supports the rear wheel may rust. Should the vehicle continue to be driven under severe environmental conditions the rusting will progress and the control arms could deform thereby adversely affecting vehicle operation.

カナダ運輸省1985年4月30日1985051モデルイヤー 1980–1982原文(英語)で表示中 · 翻訳待ち詳細を見る →

最新の技術サービス通報

すべて表示 (12) →
技術通報中程度トランスミッションNA

技術通報

Toyota Genuine Oil Seal Side Lip Grease is used when installing/removing the drive shaft to prevent: ? The intrusion of water, dust, etc. ? Improvement of sealing performance ? Reduction of sliding resistance

NHTSA · メーカー通報10234321原文(英語)で表示中 · 翻訳待ち詳細を見る →
技術通報中程度ボディNA

技術通報

TSB: TMNA Accessory Sales and Marketing has developed a Toyota paint protection film (PPF) decal (treated with a specially developed light adhesive) for 2021 model year Toyota vehicles. The decal comes in two sizes (2.8 in. x 8 in. and 4 in. x 8 in.) for small and large hoods and will be applied to the top of PPF for all series at TLS accessory installation facilities. The decal is intended to stay affixed to the film until delivery detail/wash. Just before customer delivery, follow the Removal Procedure in this bulletin to remove the decal and any residue left by the adhesive.

NHTSA · メーカー通報10173973原文(英語)で表示中 · 翻訳待ち詳細を見る →
技術通報軽微サスペンションNA

技術通報

TSB: During the manufacturing process, tires are mounted on the vehicle as matched sets to help reduce conditions such as pulling or drifting. If the wheels are replaced or refinished before vehicle delivery, it is important that the tires remain on the vehicle in the same location and in the same direction of rotation. Refer to the Tire Positioning Procedure in this bulletin to ensure that the original tires stay in the same location on the vehicle.

NHTSA · メーカー通報10173975原文(英語)で表示中 · 翻訳待ち詳細を見る →

出典:NHTSA(米国、パブリックドメイン)、カナダ運輸省(Open Government Licence – Canada)、DVSA(英国、Open Government Licence v3.0)、RappelConso および EU Safety Gate(フランス、Licence Ouverte 2.0)。