23% of periodic inspections of this car in Finland found a fault on this item serious enough to fail the car (76 faults in 324 inspections in 2025): 2.5 times as often as cars of the same age.
Due to improper moulding of the body of the crankshaft position sensor engine oil may penetrate the seal and enter the sensor wiring connector. In this condition the engine oil within the sensor's wiring connector may expand due to engine heat and could deform the sensor. In the worst case the connector may become disconnected which could cause the engine to stall while driving and restarting would not be possible.
Due to loss of control of the vehicle, the product poses a risk of accident. Given the improper moulding of the resin body of the crankshaft position sensor installed on the engine block, engine oil may penetrate the seal and enter the sensor wiring connector. In this condition, engine oil inside the sensor wiring connector could cause expansion due to the heat of the engine and could deform the sensor wiring connector. In the worst case, the connector may become disconnected, which could cause the engine to stall while driving and not be able to be restarted.
出典:NHTSA(米国、パブリックドメイン)、カナダ運輸省(Open Government Licence – Canada)、DVSA(英国、Open Government Licence v3.0)、RappelConso および EU Safety Gate(フランス、Licence Ouverte 2.0)、国土交通省(日本、公共データ利用規約1.0)、韓国国土交通部(car.go.kr)。