무료 열람 · 무료 계정으로 기여Anticars(2000)의 후속

BMW M3

1986– · 6 세대 · 결함 15건 · 2개 시장
세대

기술 서비스 공지(TSB)는 제조사가 알려진 문제에 대해 딜러에게 보내는 수리 지침입니다. 안전 리콜은 아니지만 결함을 확인해 주는 경우가 많습니다.

연식
시장전체NA
F80 M3 · 2014–2018
공지심각서스펜션NA

공지

## 사고 손상으로 인한 조향기어 교체 정보 다음 경우에는 조향기어를 교체할 필요가 없습니다: ? 스프링 스트럿, 허브 또는 스핀들, 컨트롤 암 또는 위시본, 위치 고정 기능을 수행하는 스러스트 또는 텐션 로드 또는 스태빌라이저, 조향 드롭암 또는 피트만 암, 트랙 로드 또는 드래그 링크, 타이 로드, 앞차축 서브프레임, 조향 칼럼, 그리고 서스펜션 부품의 차체 연결 지점 등 앞차축 부품에 눈에 보이는 손상이 없는 경우 ? 엔진을 끈 상태에서 록투록(lock to lock)으로 조향기어를 작동할 때 걸림이나 조향력 증가가 없는 경우 ? 충격으로 인해 휠 얼라인먼트가 일반적인 조정 절차로 규정 공차 내에서 조정할 수 없게 되지 않은 경우 다음 경우에는 조향기어를 반드시 교체해야 합니다: ? 화재로 인해 하우징이 그을리거나 변색되는 것을 포함하여 조향기어에 눈에 보이는 손상이 있는 경우 ? 전동식 조향기어(EPS) 버전: 모든 플러그 연결부를 포함하여 제어 장치에 손상이나 잔균열(헤어라인 크랙)이 있는지 점검합니다. ? 다음 부품에 영구 변형이나 균열이 있는 경우: ? 휠/차축 얼라인먼트 점검에서 불합격 결과가 나온 경우의 휠 림 ? 스프링 스트럿, 스티어링 스텀프, 휠 캐리어 ? 위시본 ? 스트럿, 트레일링 링크 또는 이 기능을 가진 안티롤바 ? 휠 가이드 컨트롤 부품의 차체 측 나사 체결/연결 지점 ? 앞차축 지지대 ? 피트만 암 https://www.minitis.net/tiscode/cgi-bin/bulletin.aspx?sie_path=/tsb/bulletins/htm_store/21101.1.M320405....3/2/2015 Page 2 of 2 ? 타이 로드 ? 조향박스 고정부 ? 조향 칼럼 조향 칼럼은 눈에 띄게 손상, 변형 또는 파손된 경우 반드시 교체해야 합니다. 위에 설명된 기준에 따른 교체 권고를 고객 또는 보험사가 거절하는 경우, 이를 수리 지시서(repair order)에 기록하고 거절한 당사자가 서명해야 합니다.

NHTSA · 제조사 공지10147112자동 번역 · 원문: 영어자세히 보기 →
E90/92/93 M3 · 2007–2013
공지심각전장NA

공지

"? NO REGENERATION OF THE DIESEL PARTICULATE FILTER (DPF) This Service Information bulletin supersedes SI B18 03 10 dated November 2010. . The Service Engine Soon lamp is illuminated. The following fault codes may be stored in the DDE: N47T/N57T engine 245700 - Particle filter system: particulate filter highly loaded (Exhaust backpressure high) 245800 - particle filter system - filter is heavily contaminated. (exhaust backpressure is above maximum) M57Y engine 480A Particle filter system - filter is heavily contaminated. (exhaust backpressure is too high) 481A Particle filter system - filter is heavily contaminated. (exhaust backpressure is above maximum) CAUSE 1. Faults with the exhaust system that affect the monitoring of the DPF by the DDE 2. Unfavorable recent driving profile INFORMATIOM During normal driving, there is a continuous regeneration of the diesel particulate filter that takes place at exhaust-gas temperatures between 280 and 350C (slower oxidation process). The soot particles can only be burned off when the required exhaust-gas temperature has been reached. Under certain driving conditions (i.e., prolonged short trips or an exhaust system which never reaches soot burn-off temperatures), the DPF can become restricted. The DDE will initiate periodic regeneration automatically, at the latest after 600 miles. In vehicles making many short distance journeys, periodic regeneration takes place after only 250-500 miles. The Digital Diesel Electronics control unit evaluates the time for periodic regeneration from the following values: average distance driven average driving speed temperature in the diesel particulate filter values from the exhaust pressure sensor The DDE initiates the regeneration process by decreasing incoming air by the throttle valve, and one or two post injections are executed. This heats the exhaust-gas temperature to approx. 600 C . When the exhaust temp reaches this point: The soot is burned off with the residual oxygen. The

NHTSA · 제조사 공지10146535연식 2011원문(영어)으로 표시 중 · 번역 대기자세히 보기 →
M3 (E46) · 2000–2006
공지보통브레이크NA

공지

Brake Disc Return

NHTSA · 제조사 공지11024229연식 2006원문(영어)으로 표시 중 · 번역 대기자세히 보기 →
G80 M3 · 2020–
공지보통서스펜션NA

공지

When turning the steering wheel while stationary or when driving on uneven roads; cracking, creaking, or knocking noises may be heard.

NHTSA · 제조사 공지11021817연식 2024원문(영어)으로 표시 중 · 번역 대기자세히 보기 →
G80 M3 · 2020–
공지보통브레이크NA

공지

There may be an internal leakage in the brake fluid expansion tank (aka brake fluid reservoir). In the rare case of a leak, the filling level sensor might malfunction over a relatively long period of time.

NHTSA · 제조사 공지11021109연식 2024원문(영어)으로 표시 중 · 번역 대기자세히 보기 →
G80 M3 · 2020–
공지보통브레이크NA

공지

Brake groaning noises heard at the rear axle at slow speeds, i.e. close to standstill, stop and go driving;when parking or maneuvering.

NHTSA · 제조사 공지11018518연식 2024원문(영어)으로 표시 중 · 번역 대기자세히 보기 →
F80 M3 · 2014–2018
공지보통서스펜션NA

공지

At low outside temperatures (below 40 degrees F) and slow driving speeds (i.e. when parking, maneuvering)with a large steering angle, the front end can be slightly axially misaligned. This can be felt (jerking)/ heard via an acoustic acknowledgement (clunk) as seen at the 11 second mark of the video. See attached video V36 01 21.

NHTSA · 제조사 공지10249018연식 2019원문(영어)으로 표시 중 · 번역 대기자세히 보기 →
E90/92/93 M3 · 2007–2013
공지보통브레이크NA

공지

Functional noises (squealing/honking) when braking shortly before the vehicle comes to a stop. CAUSE Material-

NHTSA · 제조사 공지10244237연식 2011원문(영어)으로 표시 중 · 번역 대기자세히 보기 →
F80 M3 · 2014–2018
공지보통서스펜션NA

공지

Vehicle cannot be opened or closed using comfort access, engine start is not possible, and the vehicle may not start when placing the key against the steering column. Note: Opening, closing and starting via the BMW Digital Key or the Digital Key Card are not affected.

NHTSA · 제조사 공지10218384원문(영어)으로 표시 중 · 번역 대기자세히 보기 →
G80 M3 · 2020–
공지보통서스펜션NA

공지

Vehicle cannot be opened or closed using comfort access, engine start is not possible, and the vehicle may not start when placing the key against the steering column.

NHTSA · 제조사 공지10206690연식 2021원문(영어)으로 표시 중 · 번역 대기자세히 보기 →
G80 M3 · 2020–
공지보통기타NA

공지

The SIM card installed in the telematics control unit (ATM2) connects to different mobile providers' networks. However, due to a missing parameter, this does not work and can cause disruption in BMW ConnectedDrive services in areas with insufficient network coverage.

NHTSA · 제조사 공지10206692연식 2021원문(영어)으로 표시 중 · 번역 대기자세히 보기 →
G80 M3 · 2020–
공지보통서스펜션NA

공지

Vehicle cannot be opened or closed using comfort access, engine start is not possible, and the vehicle maynot start when placing the key against the steering column.

NHTSA · 제조사 공지10204661연식 2021원문(영어)으로 표시 중 · 번역 대기자세히 보기 →
G80 M3 · 2020–
공지보통브레이크NA

공지

When starting the vehicle vehicle at standstill, various yellow Check Control Messages CCMs appear. ID code 00042: Brake system. Additional notes: Avoid abrupt braking as far as possible. Drive at a moderate speed. Have it checked by your nearest Service Center. ID code 2046: Braking force assistance. Additional notes: Braking force assistance failure. Higher pedal force required for vehicle deceleration. Drive at a moderate speed. Have it checked by your nearest Service Center.

NHTSA · 제조사 공지10204625연식 2021원문(영어)으로 표시 중 · 번역 대기자세히 보기 →
G80 M3 · 2020–
공지보통브레이크NA

공지

Inform the customer during a consultation that the M Compound (standard equipment) and M Carbon Ceramic (optional) brakes are high-performance brake systems which are designed for sporty, dynamic driving styles. As a side effect of the highest possible brake performance, customers are likely to hear noises due to the extremely resilient materials In the same conversation, inform the customer that his/her braking performance can help ensure that the noises do not occur or disappear quickly.

NHTSA · 제조사 공지10201141연식 2021원문(영어)으로 표시 중 · 번역 대기자세히 보기 →
G80 M3 · 2020–
공지보통서스펜션NA

공지

REMOTE CONTROL IS NOT DETECTED: Vehicle cannot be opened or closed using comfort access, engine start is not possible, and the vehicle maynot start when placing the key against the steering column.

NHTSA · 제조사 공지10200484연식 2021원문(영어)으로 표시 중 · 번역 대기자세히 보기 →
E90/92/93 M3 · 2007–2013
공지보통브레이크NA

공지

Diagnosis of Compound Brake System Complaints in M Vehicles: 1. Visible cracks are caused by high thermal stresses during rapid heating and cooling of the brake discs. Braking from high speed with cold brake components (less than 212 degrees F) increases the likelihood of cracks to form.

NHTSA · 제조사 공지10194296연식 2011원문(영어)으로 표시 중 · 번역 대기자세히 보기 →
E90/92/93 M3 · 2007–2013
공지보통전장NA

공지

Butt connector for repairing a plug connection. The ?top up coolant? message is displayed in the central display (CC message ID 166). When checking the cooling system there are no leaks found and the expansion tank is filled to the proper level.

NHTSA · 제조사 공지10193494연식 2013원문(영어)으로 표시 중 · 번역 대기자세히 보기 →
G80 M3 · 2020–
공지보통서스펜션NA

공지

REMOTE CONTROL IS NOT DETECTED: Vehicle cannot be opened or closed using comfort access, engine start is not possible, and the vehicle may not start when placing the key against the steering column.

NHTSA · 제조사 공지10186895연식 2021원문(영어)으로 표시 중 · 번역 대기자세히 보기 →
G80 M3 · 2020–
공지보통서스펜션NA

공지

LANE DEPARTURE WARNING - STEERING INTERVENTION TOO STRONG: The steering intervention for Lane Departure Warning (LDW) is too strong (severe), which can create an uncomfortable feeling for the driver. Background: Steering intervention helps keep the vehicle in the lane if the system detects that a lane marking has been crossed. The steering intervention can be noticed on the steering wheel and can be manually overridden at any time. Software error in the KAFAS (camera-based driver assistance system) control unit.

NHTSA · 제조사 공지10179823연식 2020원문(영어)으로 표시 중 · 번역 대기자세히 보기 →
G80 M3 · 2020–
공지보통전장NA

공지

COMFORT ACCESS AND COMFORT GO NOT POSSIBLE: Vehicle cannot be unlocked/locked or started via Comfort Access. Remote control functionality is restored by pressing any of the key buttons or by removing and reinstalling the remote control key battery.

NHTSA · 제조사 공지10179824연식 2020원문(영어)으로 표시 중 · 번역 대기자세히 보기 →
G80 M3 · 2020–
공지보통서스펜션NA

공지

REMOTE CONTROL IS NOT DETECTED: Vehicle cannot be opened or closed using comfort access, engine start is not possible, and the vehicle may not start when placing the key against the steering column. Note: Opening, closing and starting via the BMW Digital Key or the Digital Key Card are not affected. Software error in the BDC (Body Domain Controller) module.

NHTSA · 제조사 공지10179825연식 2020원문(영어)으로 표시 중 · 번역 대기자세히 보기 →
G80 M3 · 2020–
공지보통브레이크NA

공지

TICKING NOISE WHILE CORNERING WITHOUT THE BRAKES APPLIED: Ticking noise coming from front wheel while cornering without brakes applied, noticeable at low speeds. The vehicle must be moving.

NHTSA · 제조사 공지10178996연식 2020원문(영어)으로 표시 중 · 번역 대기자세히 보기 →
G80 M3 · 2020–
공지보통차체NA

공지

SERVICE ACTION - CHECK SUNROOF SEALING: The sunroof frame may not have been properly sealed, causing a water leak into the vehicle. Improper sealing during production.

NHTSA · 제조사 공지10179002연식 2020원문(영어)으로 표시 중 · 번역 대기자세히 보기 →
G80 M3 · 2020–
공지보통브레이크NA

공지

PREMATURE WEAR OF THE REAR AXLE BRAKE PADS WITH STANDARD BRAKES: The CBS data and Check Control (CC) message shows the rear axle brake pads are worn, and the vehicle has less than 15,500 miles. Increased residual braking forces in the rear axle brake calipers caused by production-related deviations on the surface of the piston ring seal.

NHTSA · 제조사 공지10177623연식 2020원문(영어)으로 표시 중 · 번역 대기자세히 보기 →
G80 M3 · 2020–
공지보통변속기NA

공지

JERKING OR SHUDDERING FROM THE DRIVELINE (XDRIVE TRANSFER CASE ATX13-X): There is a jerking or shuddering during either or both of the following: Cornering or accelerating from low speeds Driving with low to medium loads There are no warning lights or Check Control messages. CAUSE Unevenly worn or incorrect fitment tires are installed on the vehicle or the factory-filled transfer case oil does not meet BMW specifications.

NHTSA · 제조사 공지10176367연식 2020원문(영어)으로 표시 중 · 번역 대기자세히 보기 →
이전 →

출처: NHTSA(미국, 퍼블릭 도메인), 캐나다 교통부(Open Government Licence – Canada), DVSA(영국, Open Government Licence v3.0), RappelConso 및 EU Safety Gate(프랑스, Licence Ouverte 2.0), 일본 국토교통성(공공데이터 이용약관 1.0), 한국 국토교통부(자동차리콜센터 car.go.kr).