무료 열람 · 무료 계정으로 기여Anticars(2000)의 후속

BMW X7

2018– · 결함 10건 · 5개 시장

기술 서비스 공지(TSB)는 제조사가 알려진 문제에 대해 딜러에게 보내는 수리 지침입니다. 안전 리콜은 아니지만 결함을 확인해 주는 경우가 많습니다.

연식
시장전체NA
공지보통엔진NA

공지

COOLANT LEAK FROM LOW TEMPERATURE COOLING CIRCUIT (N63R): Coolant leaking from the engine compartment. Traces of coolant leaking from the expansion tank of the low temperature cooling system. Coolant in the low temperature cooling circuit may also have an acrid smell and discoloration.

NHTSA · 제조사 공지10166228연식 2019원문(영어)으로 표시 중 · 번역 대기자세히 보기 →
공지보통엔진NA

공지

COOLANT LEAK FROM LOW TEMPERATURE COOLING CIRCUIT (N63R) This Service Information bulletin replaces SI B17 06 17 dated February 2019.

NHTSA · 제조사 공지10163034연식 2019원문(영어)으로 표시 중 · 번역 대기자세히 보기 →
공지경미엔진NA

공지

The return springs on the exhaust camshaft followers (switchable rocker arm) may break.

NHTSA · 제조사 공지11036377연식 2023원문(영어)으로 표시 중 · 번역 대기자세히 보기 →
공지경미엔진NA

공지

Due to an assembly error the upper oil pan screws may not have been torqued correctly.

NHTSA · 제조사 공지11027758연식 2024원문(영어)으로 표시 중 · 번역 대기자세히 보기 →
공지경미엔진NA

공지

RSU availability. The engine cranks but will not start.

NHTSA · 제조사 공지11025670연식 2025원문(영어)으로 표시 중 · 번역 대기자세히 보기 →
공지경미엔진NA

공지

Oil Drain Plug Return

NHTSA · 제조사 공지11024228연식 2025원문(영어)으로 표시 중 · 번역 대기자세히 보기 →
공지경미엔진NA

공지

Due to an assembly error the upper oil pan screws may not have been torqued correctly.

NHTSA · 제조사 공지11022863연식 2025원문(영어)으로 표시 중 · 번역 대기자세히 보기 →
공지경미엔진NA

공지

Due to an assembly error, the oil pump screws may not have been torqued correctly.

NHTSA · 제조사 공지11021816연식 2024원문(영어)으로 표시 중 · 번역 대기자세히 보기 →
공지경미엔진NA

공지

Due to an assembly error the upper oil pan screws may not have been torqued correctly.

NHTSA · 제조사 공지11021815연식 2025원문(영어)으로 표시 중 · 번역 대기자세히 보기 →
공지경미엔진NA

공지

Due to an assembly error the upper oil pan screws may not have been torqued correctly.

NHTSA · 제조사 공지11021813연식 2025원문(영어)으로 표시 중 · 번역 대기자세히 보기 →
공지경미엔진NA

공지

Delivery stop: Oil pan top screw connection

NHTSA · 제조사 공지11021167연식 2025원문(영어)으로 표시 중 · 번역 대기자세히 보기 →
공지경미엔진NA

공지

A quality check revealed that the DME in these vehicles has a programming error. This results in a deviation of the fuel-air mixture in the internal combustion engine.

NHTSA · 제조사 공지11020933연식 2023원문(영어)으로 표시 중 · 번역 대기자세히 보기 →
공지경미엔진NA

공지

For certain model vehicles with the S68T engine, the Condition Based Service (CBS) data may show sparkplug replacement is due at a considerably earlier interval than specified in the Service and WarrantyInformational Booklet.

NHTSA · 제조사 공지11014663연식 2024원문(영어)으로 표시 중 · 번역 대기자세히 보기 →
공지경미엔진NA

공지

The return springs on the exhaust camshaft followers (switchable rocker arm) may break.

NHTSA · 제조사 공지11014420연식 2023원문(영어)으로 표시 중 · 번역 대기자세히 보기 →
공지경미엔진NA

공지

Customer perceptions: Vehicles with optional equipment 01CR -Remote Engine Start. The Remote Engine Start selection is missing in the Pre-conditioning sub-menu The Remote Engine Start can be selected using the vehicle key. However, the Remote Engine Start isnot carried out. The Check Control message (number 2055) appears: Remote engine start not available Vehicles with optional equipment 07ME - M Drivers Package: The increased maximum speed is not reached Vehicles with optional equipment 01MB - M Drive Professional: The M MODE TRACK is no longer available Only the M MODES ROAD and SPORT are available Applies to all the customer perceptions: Chance of the error occurring: Very rare, sporadic Both faults listed below are entered in the DME fault memory: 021280 - DME: Certificates (type 1) not ready And 021283 - DME, Secure Feature Activation: Secure Token check still running or unchecked Secure Token present Motor vehicles affected: Vehicles with engine S68T Vehicles with drive unit XB1T

NHTSA · 제조사 공지11002677연식 2024원문(영어)으로 표시 중 · 번역 대기자세히 보기 →
공지경미엔진NA

공지

The return springs on the exhaust camshaft followers (switchable rocker arm) may break.

NHTSA · 제조사 공지11000497연식 2023원문(영어)으로 표시 중 · 번역 대기자세히 보기 →
공지경미엔진NA

공지

The engine cranks but will not start.

NHTSA · 제조사 공지10250362연식 2024원문(영어)으로 표시 중 · 번역 대기자세히 보기 →
공지경미엔진NA

공지

The return springs on the exhaust camshaft followers may break.

NHTSA · 제조사 공지10249014연식 2023원문(영어)으로 표시 중 · 번역 대기자세히 보기 →
공지경미엔진NA

공지

High levels of silicone inside the ignition coil can lead to premature failure.

NHTSA · 제조사 공지10249449연식 2024원문(영어)으로 표시 중 · 번역 대기자세히 보기 →
공지경미엔진NA

공지

The return springs on the exhaust camshaft followers may break.

NHTSA · 제조사 공지10246222연식 2024원문(영어)으로 표시 중 · 번역 대기자세히 보기 →
공지경미엔진NA

공지

Delivery Stop on certain Model Year 2019 and 2020 BMW vehicles that were produced between July 20 2018 and November 2 2019. There is a possibility of contamination in the engine.

NHTSA · 제조사 공지10169456연식 2019원문(영어)으로 표시 중 · 번역 대기자세히 보기 →
공지경미엔진NA

공지

ENGINE VIBRATIONS OR NOISE This Service Information bulletin replaces SI B11 01 19 dated February 2019.

NHTSA · 제조사 공지10163027연식 2019원문(영어)으로 표시 중 · 번역 대기자세히 보기 →
공지경미엔진NA

공지

HIGH ENGINE SPEED IMMEDIATELY AFTER STARTING. In rare circumstances after the engine is started with the Start-Stop button the engine speed may immediately increase to a high constant RPM (approximately 3000 rpm).

NHTSA · 제조사 공지10163031연식 2019원문(영어)으로 표시 중 · 번역 대기자세히 보기 →
공지경미엔진NA

공지

CHECK ENGINE OIL LEVEL MESSAGE. "Check engine oil level" Check Control message (ID961) appears when starting the engine and again at the end of a trip.

NHTSA · 제조사 공지10159117연식 2019원문(영어)으로 표시 중 · 번역 대기자세히 보기 →

출처: NHTSA(미국, 퍼블릭 도메인), 캐나다 교통부(Open Government Licence – Canada), DVSA(영국, Open Government Licence v3.0), RappelConso 및 EU Safety Gate(프랑스, Licence Ouverte 2.0), 일본 국토교통성(공공데이터 이용약관 1.0), 한국 국토교통부(자동차리콜센터 car.go.kr).