Airbag Sensors C0340
On affected vehicles airbag sensors and brackets were not fitted on production. The airbags and seatbelt pre-tensioners will not be activated when needed.
🔔 무료 계정을 만들고 Renault 트래픽 (모든 세대) 이메일 알림 받기
On affected vehicles airbag sensors and brackets were not fitted on production. The airbags and seatbelt pre-tensioners will not be activated when needed.
On affected vehicles the driver and passenger airbag and seatbelt pre-tensioners may not deploy.
On affected vehicles the driver and passenger airbag and seatbelt pre-tensioners may not deploy.�
Le générateur de gaz peut se fissurer en cas d’impact avec l’airbag déployé. cela entraînera une fuite de gaz qui empêche l’airbag passager de gonfler.
The gas generator can crack in the event of an impact with the airbag deployed.This will result in gas leakage that prevents the passenger airbag from inflating.
Risk of the gas generator cracking on the passenger airbag causing a leak meaning the airbag may not display fully in an event of an accident.
null Mounting screws may be missing on the cross member of the dashboard of the passenger airbag. The absence of mounting screws on the airbag may affect its correct functioning in the event of an impact.
There is a risk the passenger airbag mounting bolts are incorrectly installed which can lead to the airbag not correctly deploying. If a heavy front end collision occurs the passenger could sustain additional injury.
It has been identified that there has been a left to right inversion of the side impact sensor wiring which in certain cases may result in inadequate deployment of the airbags in the event of a side impact.
En raison de la contamination du couvercle du coussin gonflable pendant le processus de fabrication, une partie du couvercle du coussin gonflable du conducteur peut se détacher lorsque le coussin gonflable est déployé. cette pièce peut être éjectée, rebondir sur le pare-brise et frapper le conducteur ou un passager, augmentant ainsi le risque de blessures.
Het gaspatroon van de passagiersairbag kan mogelijk scheuren.
De bouten van de gordelhouders in de derde zitrij zijn mogelijk onvoldoende vastgezet.
Les boucles de ceinture de sécurité sur les sièges passagers de troisième rangée peuvent être défectueuses.
Rear bench seatbelt buckle bolts may not be correctly tightened.
The mounting position of the plastic belt guides may be incorrect. As a consequence, the belt guide may jam, impacting the protective effect of the seat belts.
Rear seatbelt may become stuck due to incorrect fitting of the reel housing.
Een of meer bevestigingsbouten van de passagiersairbag kunnen ontbreken.
null The front passenger seat frame may have cracks in the vicinity of the floor panel anchorage points and could fail in the event of an accident.
The rear outboard seat belt stalks may become less effective as it is possible for the mounting bolt to unscrew.
It has been identified that the front passenger seatbelt pretensioner has not been configured correctly. In the event of an impact the pretensioner will not trigger. The front seat passenger will however still be retained by the seatbelt but without the pretensioner function.
The integrity of the front seat bench frame for the passengers may be compromised because of non-compliance during the manufacturing processes. Customer may hear noises coming from underneath the bench. They may also notice some cracking on the seat frame angles. If the seat fails during a collision the passengers have an elevated risk of injury.
출처: NHTSA(미국, 퍼블릭 도메인), 캐나다 교통부(Open Government Licence – Canada), DVSA(영국, Open Government Licence v3.0), RappelConso 및 EU Safety Gate(프랑스, Licence Ouverte 2.0), 일본 국토교통성(공공데이터 이용약관 1.0), 한국 국토교통부(자동차리콜센터 car.go.kr).