Leitura livre · conta gratuita para contribuirSucessor do Anticars (2000)

Audi R8

2006–2024 · 1 defeitos documentados · 3 mercados

Os boletins técnicos (TSB) são instruções de reparação que os fabricantes enviam aos concessionários sobre problemas conhecidos. Não são recalls de segurança, mas muitas vezes confirmam um defeito.

Ano do modelo
MercadoTodosNA
BoletimCríticoInteriorNA

Boletim

This Reporting Obligation requires technicains to contact the Technical Assistance Center (TAC) in cases where the airbag/seatbelt is deployed/not deployed; general accident information; and fire and overheat damage.

NHTSA · boletim do fabricante11034642Anos-modelo 2012Exibido no inglês original · tradução pendenteVer detalhes →
BoletimCríticoInteriorNA

Boletim

This Reporting Obligation requires technicains to contact the Technical Assistance Center (TAC) in cases where the airbag/seatbelt is deployed/not deployed; general accident information; and fire and overheat damage.

NHTSA · boletim do fabricante11029369Anos-modelo 2012Exibido no inglês original · tradução pendenteVer detalhes →
BoletimCríticoInteriorNA

Boletim

Este boletim contém instruções para requisitos adicionais de relatório para consultas relacionadas à segurança (airbag/cintos de segurança, acidentes, danos por incêndio e superaquecimento).

NHTSA · boletim do fabricante10165539Anos-modelo 2012Traduzido automaticamente · original: inglêsVer detalhes →
BoletimCríticoInteriorNA

Boletim

This bulletin contains instructions for additional reporting requirements for safety related inquiries (airbag/seatbelts, accidents, fire and overheat damage). 2008-2021A3, 2015-2021A3 Cabrio, 2005-2016 A3 Sportback, 1999-2021 A4, 2010-2021 A4 allroad, 1999-2012 A4 Avant, 2003-2009 A4 Cabrio, 2010-2021 A5 Cabrio, 2008-2021 A5 Coupe, 2018-2021 A5 Sportback, 1999-2021A6, 1999-2011A6 Avant, 2008-2020 A7, 1999-2021 A8, 2008-2019 e-tron, 2019-2021 e-tron quattro, 2015-2021 Q3, 2009-2021 Q5, 2007-2021 Q7, 2019 Q8, 2008-2020 R8 Coupe, 2011-2020 R8 Spyder, 2017-2019 RS3, 2007-2008 RS4, 2008 RS4 Cabrio, 2010-2021 RS5, 2010-2020 RS5 Cabrio, 2016-2018 RS6, 2016-2018 RS7, 2004-2012 S4, 2004-2009 S4 Cabrio, 2010-2021 S5 Cabrio, 2008-2021 S5 Coupe, 2018-2021 S5 Sportback, 2007-2021 S6, 2008-2020 S7, 2007-2009 S8, 2018-2021 SQ5, 2000-2021 TT Coupe, 2001-2021 TT Roadster, 2012 TT/RS Coupe

NHTSA · boletim do fabricante10161273Anos-modelo 2012Exibido no inglês original · tradução pendenteVer detalhes →
BoletimCríticoCâmbioNA

Boletim

Supersedes Technical Service Bulletin Group 30 number 11-10 dated December 2, 2011. Clutch is not operating properly. Clutch has a burnt smell. Clutch pedal does not fully return to starting position. Incorrect shifting, the revolutions of clutch plate and engine input shaft differ too much, excessive slipping of the clutch, and when the clutch is pressed and an incorrect lower gear is selected, can result in clutch damage.

NHTSA · boletim do fabricante10128471Anos-modelo 2012Exibido no inglês original · tradução pendenteVer detalhes →
BoletimCríticoMotorNA

Boletim

Supersedes Technical Service Bulletin Group 01 number 12-57 dated October 29, 2012. Noises/inconsistent engine operation after cold start during the catalyst heating phase. The customer may interpret this engine roughness as misfiring. To comply with the legal requirements on exhaust gas emissions according to the LEV-1 and LEV-2 standards, a high exhaust gas quality must be ensured. The necessary catalyst only operates at a temperature over 300C (572F). To achieve this, the catalyst is heated up. The catalyst heating phase is achieved by a late ignition angles and by introducing additional fresh air to the exhaust valves (secondary air system). Late ignition angles make sure that the exhaust gas from the cylinders has a higher temperature. This exhaust gas includes fuel that is un-burnt, and was deliberately injected into great quantities. The secondary air system adds fresh air to the exhaust gas as it leaves the cylinder and the extra fuel is burnt. As a result, the temperatures of the exhaust gas and of the catalyst increase quickly. The afterburning in the exhaust manifold before the catalyst changes the sound characteristic of the engine. This heating-up of the catalyst, including afterburning, is normal and has no effect on the service life of the engine. During this catalyst heating phase, the engine has increased idle speed, may have increased vibrations, and has a different sound characteristic. Depending on conditions, the time of the catalyst heating phase varies.

NHTSA · boletim do fabricante10123969Anos-modelo 2011–2012Exibido no inglês original · tradução pendenteVer detalhes →
BoletimCríticoMotorNA

Boletim

Supersedes Technical Service Bulletin Group 01 number 12-51 dated July 18, 2012. Noises/inconsistent engine operation after cold start during the catalyst heating phase. The customer may interpret this engine roughness as misfiring. To comply with the legal requirements on exhaust gas emissions according to the LEV-1 and LEV-2 standards, a high exhaust gas quality must be ensured. The necessary catalyst only operates at a temperature over 300C (572F). To achieve this, the catalyst is heated up. The catalyst heating phase is achieved by a late ignition angles and by introducing additional fresh air to the exhaust valves (secondary air system). Late ignition angles make sure that the exhaust gas from the cylinders has a higher temperature. This exhaust gas includes fuel that is un-burnt, and was deliberately injected into great quantities. The secondary air system adds fresh air to the exhaust gas as it leaves the cylinder and the extra fuel is burnt. As a result, the temperature of the exhaust gas and of the catalyst increases quickly. The afterburning in the exhaust manifold before catalyst changes the sound characteristic of the engine. This heating-up of the catalyst, including afterburning, is normal and has no effect on the service life of the engine. During this catalyst heating phase the engine has increased idle speed, may have increased vibrations, and a different sound characteristic. Depending on conditions the time of the catalyst heating phase varies.

NHTSA · boletim do fabricante10122803Anos-modelo 2011–2012Exibido no inglês original · tradução pendenteVer detalhes →
BoletimModeradoSuspensãoNA

Boletim

This bulletin proides service information when there is a prompt to take over the steering wheel (hands off detection).

NHTSA · boletim do fabricante11039216Anos-modelo 2023Exibido no inglês original · tradução pendenteVer detalhes →
BoletimModeradoMotorNA

Boletim

This bulletin provides information for all gasoline engines when the MIL is on; DTC P240700 is stored - Fuel leak detection pump.

NHTSA · boletim do fabricante11039214Anos-modelo 2023Exibido no inglês original · tradução pendenteVer detalhes →
BoletimModeradoSuspensãoNA

Boletim

This bulletin provides information about vibrations and rotational steering vibrations.

NHTSA · boletim do fabricante11038042Anos-modelo 2012Exibido no inglês original · tradução pendenteVer detalhes →
BoletimModeradoFreiosNA

Boletim

This bulletin provides information when there are cracks on the friction ring surface on ceramic brake discs.

NHTSA · boletim do fabricante11036924Anos-modelo 2023Exibido no inglês original · tradução pendenteVer detalhes →
BoletimModeradoFreiosNA

Boletim

This bulletin provides information about the general approach for brake vibration concerns.

NHTSA · boletim do fabricante11036921Anos-modelo 2012Exibido no inglês original · tradução pendenteVer detalhes →
BoletimModeradoFreiosNA

Boletim

This bulletin provides information for all models regarding brake sounds.

NHTSA · boletim do fabricante11036911Anos-modelo 2012Exibido no inglês original · tradução pendenteVer detalhes →
BoletimModeradoFreiosNA

Boletim

This bulletin provides information on the zirconium insercts in the brake piston (ceramic brakes only).

NHTSA · boletim do fabricante11036909Anos-modelo 2012Exibido no inglês original · tradução pendenteVer detalhes →
BoletimModeradoFreiosNA

Boletim

This bulletin provides information when there is corrosion on the friction survace of steel brake discs.

NHTSA · boletim do fabricante11036906Anos-modelo 2015–2023Exibido no inglês original · tradução pendenteVer detalhes →
BoletimModeradoMotorNA

Boletim

This bulletin provides information when the fuel tank cap seal is leaking; DTC P044200, P045600 and/ or P00EF00 in stored in the ECM.

NHTSA · boletim do fabricante11034668Anos-modelo 2023Exibido no inglês original · tradução pendenteVer detalhes →
BoletimModeradoElétricaNA

Boletim

This bulletin is informational and contains information on the various warning lamps that may appear.

NHTSA · boletim do fabricante11032194Anos-modelo 2023Exibido no inglês original · tradução pendenteVer detalhes →
BoletimModeradoSuspensãoNA

Boletim

This bulletin provides informaiotn regarding squeaking noises when steering or maneuvering.

NHTSA · boletim do fabricante11030983Anos-modelo 2012Exibido no inglês original · tradução pendenteVer detalhes →
BoletimModeradoInteriorNA

Boletim

The National Highway Traffic Safety Administration (NHTSA) has issued an urgent warning regarding counterfeit replacement airbag inflators that are being installed in used vehicles.

NHTSA · boletim do fabricante11030980Anos-modelo 2012Exibido no inglês original · tradução pendenteVer detalhes →
BoletimModeradoOutroNA

Boletim

This bulletin provides information when the air conditioner is not working, or has a restricted function; leak at the O-ring.

NHTSA · boletim do fabricante11028434Anos-modelo 2023Exibido no inglês original · tradução pendenteVer detalhes →
BoletimModeradoSuspensãoNA

Boletim

This bulletin provides information about vibrations and rotational steering vibrations.

NHTSA · boletim do fabricante11028405Anos-modelo 2012Exibido no inglês original · tradução pendenteVer detalhes →
BoletimModeradoMotorNA

Boletim

This bulletin provides information regarding UV leak additive for finding oil leaks.

NHTSA · boletim do fabricante11028398Anos-modelo 2012Exibido no inglês original · tradução pendenteVer detalhes →
BoletimModeradoFreiosNA

Boletim

This Repair Authorization requests that technicians contact the Technical Assistance Center before proceeding with any brake repairs on vehicles with Cceramic brakes.

NHTSA · boletim do fabricante11027374Anos-modelo 2023Exibido no inglês original · tradução pendenteVer detalhes →
BoletimModeradoOutroNA

Boletim

This bulletin provides information when the AC is not workoing; leak on air conditioner compressor.

NHTSA · boletim do fabricante11026275Anos-modelo 2023Exibido no inglês original · tradução pendenteVer detalhes →
BoletimModeradoFreiosNA

Boletim

This bulletin provides information when there are cracks on the friction ring surface on ceramic brake discs.

NHTSA · boletim do fabricante11025404Anos-modelo 2023Exibido no inglês original · tradução pendenteVer detalhes →
Mais antigos →

Fontes: NHTSA (Estados Unidos, domínio público), Transport Canada (Open Government Licence – Canada), DVSA (Reino Unido, Open Government Licence v3.0), RappelConso e Safety Gate da UE (França, Licence Ouverte 2.0), MLIT (Japão, Licença de Dados Públicos 1.0) e MOLIT (Coreia do Sul, car.go.kr).