Some engines are fitted with an additional water pump for the turbo charger. In some circumstances a crack may develop which then leads to melting of the plug connections and the housing. Further heat development may then lead to scorch damage. In exceptional cases such overheating can lead to smouldering of the water pump. If smouldering occurs an engine compartment fire and vehicle fire cannot be excluded.
DVSA · Reino Unido27 de abr. de 2012R/2012/049Exibido no inglês original · tradução pendenteVer detalhes →
It has been identified that the lower rubber mounting on the metal bush of the rear shock absorbers may fail to meet the quality requirement. Dependant on the mileage and operating conditions the rubber mounting may come completely free from the shock absorber. If this occurs the bodywork would no longer be supported above the wheels causing it to come into contact with the wheel concerned. Should this occur the possibility exists that a critical driving condition might occur or even the risk of an accident.
DVSA · Reino Unido6 de jul. de 2006R/2006/119Exibido no inglês original · tradução pendenteVer detalhes →
Em determinados veículos 325E, 325ES, 528E, 535I, 635CSI e 735I, a luz de freio central elevada (high mounted) pode adicionar carga elétrica suficiente para fazer o interruptor da luz de freio superaquecer, levando, com o tempo, ao derretimento das peças plásticas internas do interruptor. Isso pode fazer com que o êmbolo do interruptor emperre na posição ON ou OFF. Nesse caso, a luz de freio ficaria permanentemente acesa ou apagada, independentemente da atuação do pedal do freio. Correção: Será instalado um interruptor da luz de freio com maior capacidade de corrente nos veículos afetados.
Transport Canada27 de nov. de 19861986134Anos-modelo 1986–1987Traduzido automaticamente · original: inglêsVer detalhes →
Em determinados 533I, 633CSI e 733I, durante a montagem do servofreio e do cilindro mestre, podem ter ocorrido tensões ou, eventualmente, fissuras no flange de ligação do cilindro mestre. É possível que, durante o funcionamento do sistema de travagem, se desenvolvam novas fissuras e/ou que as fissuras existentes se agravem. Isto poderá resultar em desalinhamento dos componentes e em comprometimento do funcionamento dos travões.
Transport Canada25 de jan. de 19841984011Anos-modelo 1984Traduzido automaticamente · original: inglêsVer detalhes →
The power brake booster may have been improperly machined causing stress and possibly cracks in the master cylinder where it is attached to the power brake booster.
NHTSA · Estados Unidos19 de jan. de 198484V006000Anos-modelo 1984Exibido no inglês original · tradução pendenteVer detalhes →
On the involved vehicles, the self locking nuts that connect the lower steering column shaft to the flexible coupling may not have been sufficiently tightened. These nuts can come loose.
NHTSA · Estados Unidos9 de dez. de 198282V122000Anos-modelo 1983Exibido no inglês original · tradução pendenteVer detalhes →
On some of the involved vehicles, the knurled nut, part of the rubber mount assembly which supports the differential, may have been cracked due to over-torquing of the final drive attaching bolt. This bolt may become loose, and continued operation may cause it to fall out.
NHTSA · Estados Unidos2 de nov. de 198282V108000Anos-modelo 1982–1983Exibido no inglês original · tradução pendenteVer detalhes →
On certain 528E vehicles, at very cold temperatures, when the engine is warmed up, water vapour might condense and freeze in the throttle houseing after a period of steady driving, causing ice build-up around the throttle plate. The ice may prevent the throttle plate from closing when the driver releases the accelerator pedal. Note: This recall supersedes recall V82017.
Transport Canada27 de set. de 19821982079Anos-modelo 1981–1982Exibido no inglês original · tradução pendenteVer detalhes →
On certain BMW 528E vehicles, at temperatures of -9 degrees celsius and colder and a warmed up engine, water vapour might condense and freeze in the throttle houseing after a period of steady driving, causing ice buildup around the throttle plate. The ice may prevent the throttle plate from fully closing when the driver releases the accelerator pedal.
Transport Canada2 de fev. de 19821982017Anos-modelo 1982Exibido no inglês original · tradução pendenteVer detalhes →
On the involved vehicles, under a combination of low temperature conditions and a warmed up engine, water vapor in the warm air from the crankcase housing may condense and freeze after a period of steady state driving causing ice build up around the throttle plate. The ice might prevent the throttle plate from fully closing when the driver releases the accelerator pedal, causing a slower than normal deceleration rate and an increase of the idle speed.
NHTSA · Estados Unidos28 de jan. de 198282V010000Anos-modelo 1982Exibido no inglês original · tradução pendenteVer detalhes →
Fontes: NHTSA (Estados Unidos, domínio público), Transport Canada (Open Government Licence – Canada), DVSA (Reino Unido, Open Government Licence v3.0), RappelConso e Safety Gate da UE (França, Licence Ouverte 2.0), MLIT (Japão, Licença de Dados Públicos 1.0) e MOLIT (Coreia do Sul, car.go.kr).