Os boletins técnicos (TSB) são instruções de reparação que os fabricantes enviam aos concessionários sobre problemas conhecidos. Não são recalls de segurança, mas muitas vezes confirmam um defeito.
0Replacement of Steering Gear Due to Accident Damage. INFORMATION The steering gear does NOT have to be replaced if: ? There is no visible damage to front axle parts such as spring struts, hubs or spindles, control arms or wishbones, thrust or tension rods or stabilizers performing a locating function, steering drop arms or Pitman arms, track rods or drag links, tie rods, front axle subframe, steering column, and attachment points for suspension components to body. ? There is no binding or increase in turning effort when operating the steering gear from lock to lock with engine off. ? The impact has not caused the wheel alignment to become not adjustable within specified tolerances using normal adjustment procedures. The steering gear MUST be replaced if: ? There is visible damage to the steering gear, including blackening or discoloration of the housing from fire damage. ? Electric steering gear (EPS) version: Examine the control unit with all plug connections for damage and hairline cracks. ? There is any permanent deformation or cracks on: ? Wheel rims in the event of a negative result from the wheel/axle alignment check ? Spring struts, steering stubs, wheel carriers ? Wishbones ? Struts, trailing links or the anti-roll bar with this function ? Body side screwing/attachment points for wheel guide control components ? Front axle support ? Pitman arms https://www.minitis.net/tiscode/cgi-bin/bulletin.aspx?sie_path=/tsb/bulletins/htm_store/21101.1.M320405....3/2/2015 Page 2 of 2 ? Tie rods ? Steering box fixtures ? Steering column The steering column MUST be replaced if visibly damaged, deformed or broken. If a recommended replacement with the criteria described above is refused by the customer or insurance company, this should be noted in the repair order and signed by the refusing party.
NHTSA · boletim do fabricante10147112Exibido no inglês original · tradução pendenteVer detalhes →
Component-Specific Limited Warranty Extension. For the eligible vehicles, BMW of North America, LLC (BMW NA) is extending the limited warranty for the vehicle's Leak Diagnosis Module with hose assembly (NVLD, shown) to: 15 years/150,000 miles as determined by the vehicle's original in-service date. For eligible MY 2017 BMW 530i Sedan and xDrive (B460) vehicles that are currently registered in the State of California (CA) or a State that has fully adopted the State of California PZEV/SULEV regulation (CT, ME, MD, MA, NJ, NY, RI, and VT), the standard component-related coverage for the NVLD is 15 years/150,000 miles. This component-specific limited warranty extension applies to defects in materials or workmanship. This coverage is subject to the same vehicle eligibility requirements, limitations, and exclusions that apply to the BMW New Vehicle Limited Warranty for Passenger Cars and Light Trucks. Over time, the Leak Diagnosis Module (NVLD) (with connected hose) component material may fail, this can create a fine leak to develop in the Evaporative Emission Control System (EVAP). Should this occur, corresponding fault codes will be stored in the DME memory and the MIL (Malfunction Indicator Lamp) will illuminate.
NHTSA · boletim do fabricante10224185Exibido no inglês original · tradução pendenteVer detalhes →
Vehicle cannot be opened or closed using comfort access, engine start is not possible, and the vehicle may not start when placing the key against the steering column. Note: Opening, closing and starting via the BMW Digital Key or the Digital Key Card are not affected.
NHTSA · boletim do fabricante10218384Exibido no inglês original · tradução pendenteVer detalhes →
Uma das seguintes situações pode ocorrer ao conectar-se a motocicletas BN2000:
1. As unidades de controle instaladas não são encontradas ao realizar a leitura com o ISTA. Todas as unidades de controle são exibidas em amarelo (as unidades de controle não se identificam) na visão geral do barramento e na lista de unidades de controle. Aparece uma entrada na memória de falhas referente a uma falha de comunicação com o veículo.
2. As unidades de controle inicialmente se comunicam após a conexão com o veículo, mas a comunicação para posteriormente.
BMW Parts Bulletin TEC6S Screw Return BMW AG has requested the return of the following part number: 18 30 7 639 098 Stock should not be sold or installed on any vehicle. Please return the part(s) to your facing Regional Distribution Center (RDC). Submit for return using a YR26 damage claim with order reason BM2. A valid BMW delivery and delivery item number must be entered, and TEC6S must appear in the text of your TEC claim. TEC6S is valid from May 30, 2013, through June 13, 2013.The deadline for filing a claim under TEC6S is June 13, 2013. All parts must be returned to your facing RDC no later than June 27, 2013. Please refer to the ETK with a VIN and order the correct part number as needed. (c) 2013, BMW of North America, LLC. The contents of this document are confidential and should not be shared with third parties for distribution.
NHTSA · boletim do fabricante10150082Exibido no inglês original · tradução pendenteVer detalhes →
BMW AG has requested a return of the following part number: 36 10 6 856 227 Stock should not be sold or installed on any vehicle. Please return the part(s) to your facing Regional Distribution Center (RDC). Submit for return using a YR26 damage claim with order reason BM2. A valid BMW delivery and delivery item number must be entered, and TEC2T must appear in the text of your TEC claim
NHTSA · boletim do fabricante10150081Exibido no inglês original · tradução pendenteVer detalhes →
BMW Parts Bulletin TEC7S Floor Mat Return BMW AG has requested the return of the following part number: 51 47 2 166 147 Stock should not be sold or installed on any vehicle. Please return the part(s) to your facing Regional Distribution Center (RDC). Submit for return using a YR26 damage claim with order reason BM2. A valid BMW delivery and delivery item number must be entered, and TEC7S must appear in the text of your TEC claim. TEC7S is valid from May 30, 2013, through June 13, 2013.The deadline for filing a claim under TEC7S is June 13, 2013. All parts must be returned to your facing RDC no later than June 27, 2013. Please re-order the same part number as needed. (c) 2013, BMW of North America, LLC. The contents of this document are confidential and should not be shared with third parties for distribution.
NHTSA · boletim do fabricante10150083Exibido no inglês original · tradução pendenteVer detalhes →
BMW Parts Bulletin TEC1T RDC Module Return BMW NA has requested the inspection of the following part numbers: 36 10 6 856 227 and 36 10 6 798 872 Stock should not be sold or installed on any vehicle. Please return the part(s) to your facing Regional Distribution Center (RDC). Submit for return using a YR26 damage claim with order reason BM2. A valid BMW delivery and delivery item number must be entered, and TEC1T must appear in the text of your TEC claim. TEC1T is valid from May 30, 2013, through June 13, 2013.The deadline for filing a claim under TEC1T is June 13, 2013. All parts must be returned to your facing RDC no later than June 27, 2013. Part number 36 10 6 856 227: All parts with an index of 02 and older must be returned. All parts with an index of 03 are correct. Part number 36 10 6 798 872: All parts with an index of 03 and older must be returned. All parts with an index of 04 are correct. The Index is the two digit code under the bar code located on the box label. The Index can also be found on the part itself just after the part number. Please re-order the same part number as needed. (c) 2013, BMW of North America, LLC. The contents of this document are confidential and should not be shared with third parties for distribution.
NHTSA · boletim do fabricante10150084Exibido no inglês original · tradução pendenteVer detalhes →
At MlNl,we are committed to maintaining a level of automotive and service excellence that exceeds your expectation now and in the future. Consistent with this philosophy, we want to help you avoid problems and minimize your in convenience. This letter addresses an issue involving the power-assist steering pump and associated pump cooling fan on certain model year 2002-2005 Mini Cooper and Mini Cooper S Models. We are extending the warranty coverage for the power assist steering pump and associated cooling fan on yoiur vehicle to 13 years / 150000 miles, whichever comes first.
NHTSA · boletim do fabricante10150085Exibido no inglês original · tradução pendenteVer detalhes →
BMW Parts Bulletin TEC8S Floor Mat Return BMW AG has requested the return of the following part number: 51 47 2 166 151 Stock should not be sold or installed on any vehicle. Please return the part(s) to your facing Regional Distribution Center (RDC). Submit for return using a YR26 damage claim with order reason BM2. A valid BMW delivery and delivery item number must be entered, and TEC8S must appear in the text of your TEC claim. TEC8S is valid from May 30, 2013, through June 13, 2013.The deadline for filing a claim under TEC8S is June 13, 2013. All parts must be returned to your facing RDC no later than June 27, 2013. Please re-order the same part number as needed. (c) 2013, BMW of North America, LLC. The contents of this document are confidential and should not be shared with third parties for distribution.
NHTSA · boletim do fabricante10150079Exibido no inglês original · tradução pendenteVer detalhes →
BMW AG has requested a return of the following part number: 36 11 1 509 164 Stock should not be sold or installed on any vehicle. Please return the part(s) to your facing Regional Distribution Center (RDC). Submit for return using a YR26 damage claim with order reason BM2. A valid BMW delivery and delivery item number must be entered, and TEC9S must appear in the text of your TEC claim.
NHTSA · boletim do fabricante10150080Exibido no inglês original · tradução pendenteVer detalhes →
High-pressure Direct Injection Fuel System Repairs. INFORMATION Failure to follow the repair procedures, including the use of the special tools and correct torque specifications during the removal, installation and/or replacement of the high-pressure fuel system components, can result in damage to the high-pressure fuel lines, high-pressure fuel injectors, high-pressure pump and the cylinder head. The use of aftermarket slide hammers and pry bar-type tools is not allowed when removing and installing or replacing these components. Using tools that abruptly shock the injector housing to remove the injector from the cylinder head can lead to failures of the cylinder head and/or the injector itself. The use of power or pneumatic tools is not allowed when removing and installing or replacing these components. Always refer to the proper ISTA/D repair instruction for the approved tools and procedures applicable to the vehicle in the work shop.
NHTSA · boletim do fabricante10149588Exibido no inglês original · tradução pendenteVer detalhes →
BMW Parts Bulletin TEC142 Airbag Return BMW AG has requested the return of the following part numbers: 72 12 9 394 543 (E46 Passenger Air Bag Interim) 72 12 9 394 542, 72 12 7 112 351, 72 12 7 112 351, 72 12 9 384 807, 72 12 9 330 942, 72 12 7 065 920 Stock should not be sold or installed on any vehicle. Recall SIBs (B65 15 13, B65 17 14) are currently being updated. Please reorder the new final remedy part number 72 12 6 998 949 immediately so there is no lack of availability for E46 Passenger air bag repairs. If you plan on ordering more than 20 pcs a month, please order 45 pcs on one line (1 pallet of 45). For accident vehicles not affected by an open recall, please refer to EPC with VIN for replacement part number. Concerned are all parts delivered and shipped so far. Please return all part(s) to your facing Regional Distribution Center (RDC). Submit for return using a YR26 damage claim with order reason BM2. A valid BMW delivery and delivery item number must be entered, and TEC142 must appear in the text of your TEC claim. TEC142 is valid from October 31, 2018, through November 14, 2018. The deadline for filing a claim under TEC142 is November 14, 2018. All parts must be returned to your facing RDC no later than November 28, 2018. When submitting a return claim, please specify in the comment section if the part is in its original factory seal or if it was previously opened. (c) 2018, BMW of North America, LLC. The contents of this document are confidential and should not be shared with third parties for distribution.
NHTSA · boletim do fabricante10149563Exibido no inglês original · tradução pendenteVer detalhes →
BMW Parts Bulletin TEC141 Seat Pad Return BMW AG has requested the return of the following part numbers: 52 10 7 478 172, 52 10 7 478 175, 52 10 7 478 176 52 10 7 478 177, 52 10 7 478 178, 52 10 7 478 180 Stock should not be sold or installed on any vehicle. Concerned are all parts delivered and shipped so far.
NHTSA · boletim do fabricante10149562Exibido no inglês original · tradução pendenteVer detalhes →
CLOSED-CIRCUIT CURRENT MONITORING. Increased closed-circuit currents may occur permanently or intermittently and cause the battery to discharge prematurely. The increase in closed-circuit current may be caused by a faulty control module or by the installation of a non-approved accessory. In a situation where a vehicle has broken down due to a discharged battery, for diagnostic purposes it is important not to disconnect the battery. This is because a control module will be reset if the battery is disconnected. Following a reset, the faulty control module may start functioning correctly again, making accurate diagnosis impossible. To correctly measure closed-circuit current, the 50-amp or 100-amp clip-on probe can be used in conjunction with the IMIB (Integrated Measurement Interface Box) to properly diagnose closed-circuit current problems over an extended period of time.
NHTSA · boletim do fabricante10149555Exibido no inglês original · tradução pendenteVer detalhes →
Delivery Stop: 2013 3 Series Emissions Label. A Delivery Stop has been issued by BMW AG to correct the Vehicle Emissions Control Information (VECI) label. Affected are certain 2013 Model Year 3 Series vehicles with xDrive. Vehicles included in the attached chassis number list must not be delivered until the correct VECI label has been installed. Service and parts instructions will be provided as soon as the labels are available for ordering (estimate: 1 week).
NHTSA · boletim do fabricante10149497Exibido no inglês original · tradução pendenteVer detalhes →
2013 MINI JCW Paddle Shifter Retrofit. SZL to EGS harness installation. For necessary preliminary tasks, refer to ISTA and perform the following steps listed in this document.
NHTSA · boletim do fabricante10149498Exibido no inglês original · tradução pendenteVer detalhes →
N63: Proper Ignition Harness Installation and Ground Connections. INFORMATION https://www.bmwtis.net/tiscode/cgi-bin/bulletin.aspx?sie_path=/tsb/bulletins/htm_store/16511.1.B12241... 10/14/2014 Page 2 of 2 Any consecutive damage to the BSD interface components (DME, alternator voltage regulator, QLT sensor) caused by incorrect reinstallation of the ignition harness is not covered under the BMW New Vehicle /SAV Limited Warranty.
NHTSA · boletim do fabricante10148021Exibido no inglês original · tradução pendenteVer detalhes →
Fontes: NHTSA (Estados Unidos, domínio público), Transport Canada (Open Government Licence – Canada), DVSA (Reino Unido, Open Government Licence v3.0), RappelConso e Safety Gate da UE (França, Licence Ouverte 2.0), MLIT (Japão, Licença de Dados Públicos 1.0) e MOLIT (Coreia do Sul, car.go.kr).