Electrical system:Wiring:Fuses and circuit breakers
An in line fusible link may melt down and cause a fire.
🔔 Crie uma conta gratuita para receber alertas por e-mail sobre Buick Electra (todas as gerações)
An in line fusible link may melt down and cause a fire.
These vehicles may have insufficient clearance between the power steering pump return hose and the exhaust manifold due to incorrect routing. This condition could cause overheating of the hose, resulting in a fluid leak. This could result in an engine compartment fire without prior warning. Correction: Power steering pump hose will be replaced if it was incorrectly routed.
There may not be enough clearance between the power steering pump return hose and the engine exhaust manifold. Consequence of defect: Hose could overheat, resulting in a hole and fluid leak, and a possible engine compartment fire without prior warning.
Vehicles may have been assembled with a rubber fuel return hose which could allow a slow fuel leak while the engine is running. Under certain conditions this could result in a fire which could spread to the passenger compartment and cause burn unjuries to occupants.
Rubber fuel hose could allow a slow fuel leak while the engine is running.
The power brake vacuum hoses may fail to conform to federal motor vehicle safety standard no. 106, "brake hoses". The material used in the hoses will not perform according to specifications. The purpose of this regulation is stated as, "to reduce death and injuries occurring as a result of brake system failure from pressure or vacuum loss due to hose assembly rupture".
A pequena bucha de náilon no estribo (suporte) do servo do controle de cruzeiro pode sair da posição, o que pode resultar em aumentos intermitentes da rotação do motor ou em "dieselização" (funcionamento do motor após desligada a ignição). Essa condição também pode fazer com que o conjunto da haste do servo desgaste a esfera e prenda em outros componentes, possivelmente resultando em uma trava do acelerador. Isso pode levar à perda de controle do veículo e a uma possível colisão. Correção: Um kit de buchas será instalado no estribo do servo do controle de cruzeiro.
Uma pequena bucha de náilon no pino (bail) do servo do controle de cruzeiro pode sair da posição, causando aumentos intermitentes e inesperados na rotação do motor, ou dieselização (funcionamento do motor após a chave ser desligada).
Estes veículos não estão em conformidade com a norma c.M.V.S.S. 1105 (emissões evaporativas). Os veículos podem apresentar defeito no interruptor termovácuo de purga do canister, deixando-o inoperante.
Excessive accelerator cable friction may restrict the cable's free movement between the accelerator pedal and the throttle body. This could prevent the throttle from returning to idle when the accelerator pedal is released and possibly result in loss of accelerator control and a vehicle crash without prior warning. Correction: Vehicles will be inspected and accelerator control cable will be replaced if required.
Excessive accelerator cable friction may restrict the cables free movement between the accelerator pedal and the throttle body.
On vehicles with antilock brakes,brake fluid may seep from the abs pressure/warning switch,eventually leading to the loss of the hydraulic pump motor.Also the pump motor and abs electrical relays may have been contaminated during assembly.This can cause loss of the hydraulic pump motor &/or the abs function.Loss of the pump motor would eventually lead to loss of the rear brakes & loss of power assist to the front brakes.This would result in increased stopping distance.An inoperative abs relay could cause loss of the abs function.Abs,pump motor relays,& 30 amp fuses will be replaced.
The anti lock brake system (abs) pressure/warning switch may exhibit brake fluid seepage which eventually can lead to loss of the brake system hydraulic pump motor. Additionally, the hydraulic pump motor and abs electrical relays may have been exposed to water contamination during vehicle assembly. This condition can cause loss of the hydraulic pump motor and/or loss of the abs function.
The push pull headlight switch may have electrical contacts which allow an intermittent headlight circuit causing headlight to flicker or suddenly go out. Consequence of defect: Sudden loss of the headlights under severe weather or nighttime driving conditions could reduce driver visibility which might result in a vehicle crash without prior warning.
These vehicles do not comply with c.M.V.S.S.1101-emission device.
Em determinadas condições de operação do veículo, o suporte do contrapeso do regulador na bomba injetora pode falhar. A válvula borboleta pode ficar travada, impedindo o retorno à marcha lenta e o desligamento do motor pelo condutor.
The involved vehicles may have been assembled with a brake pedal support bracket which was designed for use in diesel engine vehicles. The incorrect bracket may cause the service brakes to remain partially applied, resulting in brake overheating and reduced braking effectiveness.
Owners manuals did not fully explain how front shoulder belt comfort feature works.
Fontes: NHTSA (Estados Unidos, domínio público), Transport Canada (Open Government Licence – Canada), DVSA (Reino Unido, Open Government Licence v3.0), RappelConso e Safety Gate da UE (França, Licence Ouverte 2.0).