Os boletins técnicos (TSB) são instruções de reparação que os fabricantes enviam aos concessionários sobre problemas conhecidos. Não são recalls de segurança, mas muitas vezes confirmam um defeito.
"Engine Oil Cooler Leak Customers may comment on one or more of the following: Vehicle overheats. Coolant overflow recovery bottle contains milky fluid. Coolant found leaking under the vehicle. Engine oil cooler is leaking. This bulletin involves installing a coolant flow restrictor and possibly replacing the engine oil cooler."
NHTSA · boletim do fabricante11011752Anos-modelo 2024Exibido no inglês original · tradução pendenteVer detalhes →
COOLER Engine Oil Please be aware that the oil cooler seal is serviceable as a standalone part and should be considered for replacement as a remedy for fluid leak.
NHTSA · boletim do fabricante10248850Anos-modelo 2023Exibido no inglês original · tradução pendenteVer detalhes →
PUMP Water For 2016-2024MY 3.6L Pentastar Upgrade with suspected coolant leak. PRIOR TO PERFORMING ANY WATER PUMP REPLACEMENT, PROCEED WITH INSPECTION INSTRUCTIONS FROM THE LATEST VERSION OF STAR ONLINE PUBLICATION S2307000002. Please submit pictures of the leak area thru the DIDI process outlined in the STAR Online document. NOTE: Some coolant residue may be found at the water pump weep hole plug area which may be normal, but coolant should not be dripping from this location. If unsure about, use the Pressurized Coolant System Inspection process as found in the Dealer Connect Cooling Diagnosis and Testing Procedures.
NHTSA · boletim do fabricante10248505Anos-modelo 2023Exibido no inglês original · tradução pendenteVer detalhes →
PUMP Water For 2016-2024MY 3.6L Pentastar Upgrade with suspected coolant leak. PRIOR TO PERFORMING ANY WATER PUMP REPLACEMENT, PROCEED WITH INSPECTION INSTRUCTIONS FROM THE LATEST VERSION OF STAR ONLINE PUBLICATION S2307000002. Please submit pictures of the leak area thru the DIDI process outlined in the STAR Online document. NOTE: Some coolant residue may be found at the water pump weep hole plug area which may be normal, but coolant should not be dripping from this location. If unsure about, use the Pressurized Coolant System Inspection process as found in the Dealer Connect Cooling Diagnosis and Testing Procedures.
NHTSA · boletim do fabricante10244344Anos-modelo 2023Exibido no inglês original · tradução pendenteVer detalhes →
Missing Upper Fuel Tank Heat Shield This bulletin involves installing the upper heat shield on the top of the fuel tank. Customers or technicians may notice that a vehicle that is equipped with a tow n go package that the upper fuel tank shield is missing.
NHTSA · boletim do fabricante10221357Anos-modelo 2021Exibido no inglês original · tradução pendenteVer detalhes →
Missing Upper Fuel Tank Heat Shield This bulletin involves installing the upper heat shield on the top of the fuel tank. Customers or technicians may notice that a vehicle that is equipped with a tow n go package that the upper fuel tank shield is missing.
NHTSA · boletim do fabricante10212499Anos-modelo 2021Exibido no inglês original · tradução pendenteVer detalhes →
Descrição da peça: Bloco longo 5.7L
Descrição do problema: Este conjunto de bloco longo 5.7L é compatível com aplicações EGR e não EGR. Uma placa de bloqueio EGR (53032739AA) deve ser encomendada ao instalar este conjunto de bloco longo em uma aplicação não EGR. A menos que a placa de bloqueio EGR seja transferida do motor antigo.
Customer Satisfaction Notification T12 VECI Label The Vehicle Emission Control Information (VECI) label on about 120,000 of the above vehicles may be missing emission control information. The VECI label is often used during in-use Inspection and Maintenance (I/M) testing to verify proper emissions related components. Incorrect VECI label information could result in denial of vehicle registration for the vehicle in the state of California. A new VECI label must be installed.
NHTSA · boletim do fabricante10224875Anos-modelo 2015Exibido no inglês original · tradução pendenteVer detalhes →
Service - Four Piece Oil Pan Gasket All Cummins Equipped Vehicles ONLY - The replacement oil pan gasket can be a four piece gasket rather than a single piece gasket. This applies to Cummins 5.9L and 6.7L engines only. Installation: 1. Clean the oil pan T-joints.~ 2. Fill the T-joint between the pan rail/gear housing and pan rail/rear seal retainer with sealant. Use Mopar Silicone Rubber Adhesive Sealant or equivalent. 3. Apply a 2-mm [0.063-in] bead of Mopar Engine Sealant RTV Silicone Rubber Adhesive, to the oil pan flange.~ 4. The four piece gasket will need to be assembled to make a complete oil pan gasket. 5. Lay the oil pan gasket(s) onto the oil pan flange.~ 6. Ensure the oil pan gasket segment joints are properly aligned. 7. Apply a 2-mm [0.063-in] bead of Mopar Engine Sealant RTV Silicone Rubber Adhesive, to the top of the oil pan gasket.~ 8. Install the oil pan. Starting from the center and working outward, tighten the oil pan bolts to 28 Nm [21 ft. lbs.].
NHTSA · boletim do fabricante10223854Anos-modelo 2007Exibido no inglês original · tradução pendenteVer detalhes →
Replace Vehicle Emission Certification Information Label This bulletin involves replacing the Vehicle Emission Certification Information (VECI) Label.Owner may be turned away from Inspection and Maintenance (IM) station or fail IM testing because of missing emission components on VECI label. The customer may notice that some info is missing on their VECI labels.is missing. If information is shown in this area, do not replace the label.All vehicles were built with the correct emission components installed and there is no impact on emission performance or drivability.
NHTSA · boletim do fabricante10223853Anos-modelo 2015Exibido no inglês original · tradução pendenteVer detalhes →
SEAL, Crankshaft Oil, Front Front crankshaft oil seal leak: For concern of front crankshaft seal leak please send an email to brenton.swank@fcagroup.com with VIN, Mileage, Photos and indicate where the leak is identified using dye such as: 1. Leak between the outer diameter of the seal to front cover? 2. Leak between the seal and damper 3. Leak through the damper bolt This will help in determining root cause and corrective action. For additional questions, please contact: Brenton Swank: Cell (248) 804-9386 or brenton.swank@fcagroup.com If no response in 15 minutes, proceed with repair.
NHTSA · boletim do fabricante10166535Anos-modelo 2019Exibido no inglês original · tradução pendenteVer detalhes →
Replace Vehicle Emission Certification Information Label This bulletin involves replacing the Vehicle Emission Certification Information (VECI) Label.Owner may be turned away from Inspection and Maintenance (IM) station or fail IM testing because of missing emission components on VECI label. The customer may notice that some info is missing on their VECI labels.is missing. If information is shown in this area, do not replace the label.All vehicles were built with the correct emission components installed and there is no impact on emission performance or drivability.
NHTSA · boletim do fabricante10121890Anos-modelo 2015Exibido no inglês original · tradução pendenteVer detalhes →
"pentastar oil filter adapter before replacing this part, please call any one of the following people. Engineering is seeking information regarding this part.~ dye must be used to determine where the leak is coming from before replacing. Also please check the recently updated service bulletin number 09-008-15. ~ first: Nick morand cell (248) 410-5078 - nick.Morand@fcagroup.Com second: Bob jackson cell (248) 944-0466 - bob.Jackson@fcagroup.Com third: Joe lovell cell (734 309-6467 - joe.Lovell@fcagroup.Com if a response is not received within 15 mins, then proceed with the necessary repair."
NHTSA · boletim do fabricante10080203Anos-modelo 2014Exibido no inglês original · tradução pendenteVer detalhes →
Various vehicles are experiencing loss of oil, and possibly an oil leakage pooling in engine valley and possibly need replacing oil filter housing. Model 2014. *pe
NHTSA · boletim do fabricante10058301Anos-modelo 2014Exibido no inglês original · tradução pendenteVer detalhes →
ENGINE ASSY - 3.6L AUTO TRANS Before replacing the engine due to an abnormal ticking noise, please check that the INTAKE Hydraulic Lash Adjusters are not "collapsed". If a collapsed INTAKE HLA is found, replace all INTAKE HLAs on the suspect cylinder head. The noise can occur at low or high RPMs, and at low or high temperatures. There are no Diagnostic Trouble Codes (DTC)s present. CAUSE: INTAKE Hydraulic Lash Adjuster may have a manufacturing issue that can cause the plunger to stick, generating valvetrain noise.
NHTSA · boletim do fabricante10247902Anos-modelo 2022–2023Exibido no inglês original · tradução pendenteVer detalhes →
Fuel Nozzle Premature Shut Off The customer may experience the following: ? Hard to fill fuel tank, premature fuel nozzle shut off. This bulletin involves inspecting and replacing the fuel filler tube
NHTSA · boletim do fabricante10242824Anos-modelo 2023Exibido no inglês original · tradução pendenteVer detalhes →
Engine Ticking Noise Engine makes an abnormal ticking noise. There may be Diagnostic Trouble Codes (DTC)s present. This bulletin involves inspecting and if needed, replacing the intake HLAs. NOTE: **ALL VEHICLES ON THE RSU VIN LIST REQUIRE ALL 12 INTAKE HYDRAULIC LASH ADJUSTERS TO BE REPLACED**.
NHTSA · boletim do fabricante10239951Anos-modelo 2022–2023Exibido no inglês original · tradução pendenteVer detalhes →
PSU right intake camshaft Case 1) If you are to flash the PSU (Pentastar Upgrade Engine) PCM due to P0300 code presence, only AB or previous LEVEL PSU right intake camshaft PN 05047913AA or AB (old version) should be replaced. If the engine is equipped with the AC/AD LEVEL PSU right intake camshaft PN 05047913AC or AD (new version), camshaft should NOT be replaced. Case 2) If the intake camshaft or intake rocker arm has excessive wear on the high lift profile (Rocker arm: slider, Camshaft: central lobe), replace the intake camshaft (1) in that cylinder head and all intake rocker arms (6).
NHTSA · boletim do fabricante10239855Anos-modelo 2023Exibido no inglês original · tradução pendenteVer detalhes →
Fontes: NHTSA (Estados Unidos, domínio público), Transport Canada (Open Government Licence – Canada), DVSA (Reino Unido, Open Government Licence v3.0), RappelConso e Safety Gate da UE (França, Licence Ouverte 2.0), MLIT (Japão, Licença de Dados Públicos 1.0) e MOLIT (Coreia do Sul, car.go.kr).