Os boletins técnicos (TSB) são instruções de reparação que os fabricantes enviam aos concessionários sobre problemas conhecidos. Não são recalls de segurança, mas muitas vezes confirmam um defeito.
## Iluminação da Luz de Aviso do Airbag
Os clientes podem notar a iluminação da Luz Indicadora de Mau Funcionamento (MIL). Após investigação adicional, o técnico pode encontrar um ou mais dos seguintes Códigos de Diagnóstico de Falha (DTCs) registrados:
? B0050-1D - Interruptor do Cinto de Segurança do Motorista Dianteiro - Fora de Faixa (Ativo ou Armazenado).
? B0050-13 - Interruptor do Cinto de Segurança do Motorista Dianteiro - Circuito Aberto (Ativo ou Armazenado).
Este boletim envolve a substituição do conector em linha do assento.
Luz de advertência do airbag acesa
Os clientes podem apresentar iluminação da Lâmpada Indicadora de Mau Funcionamento (MIL). Após investigação adicional, o técnico pode constatar que um ou mais dos seguintes Códigos de Diagnóstico de Falha (DTCs) foram registrados: ? /B0050-1D - Sensor da fivela do cinto dianteiro do motorista - Fora de faixa (ativo ou armazenado). ? B0050-13 - Sensor da fivela do cinto dianteiro do motorista - Circuito aberto (ativo ou armazenado). Este boletim envolve a substituição do conector em linha do banco.
Convergence Telematics Module (CTM) Software Enhancements This bulletin involves updating the Convergence Telematics Module (CTM) software. The customer may notice the steering wheel controls and USB functionality may not operate properly after the ignition is cycled.
NHTSA · boletim do fabricante10229891Anos-modelo 2015Exibido no inglês original · tradução pendenteVer detalhes →
Convergence Telematics Module (CTM) Software Enhancements This bulletin involves updating the Convergence Telematics Module (CTM) software. The customer may notice the steering wheel controls and USB functionality may not operate properly after the ignition is cycled.
NHTSA · boletim do fabricante10221059Anos-modelo 2015Exibido no inglês original · tradução pendenteVer detalhes →
Convergence Telematics Module (CTM) Software Enhancements This bulletin involves updating the Convergence Telematics Module (CTM) software. The customer may notice the steering wheel controls and USB functionality may not operate properly after the ignition is cycled.
NHTSA · boletim do fabricante10218230Anos-modelo 2015Exibido no inglês original · tradução pendenteVer detalhes →
Front Brake Squeak/Squeal Noise This bulletin involves cleaning excessive sealant from the front brake caliper adaptor brackets and replacing the adaptor bracket mounting bolts and/or replacing the front brake pads and related hardware. The customer may describe one or more of the front brake squeak/squeal noise symptoms/conditions: ? Squeak/squeal noise during moderate brake apply combined with light steering. The noise typically occurs with warm brakes after several brake applications. ? Squeak/squeal noise during low speed brake apply with vehicle moving forward or reverse. The noise typically only occurs after the vehicle sits overnight in colder ambient temperatures and the noise will go away after a few brake applications.
NHTSA · boletim do fabricante10217387Anos-modelo 2016Exibido no inglês original · tradução pendenteVer detalhes →
Flash: Vehicle Will Not Shift Out Of Park This bulletin involves reprogramming the Electronic Shift Module (ESM) with the latest available software. Some Customers may experience a condition where the vehicle will not shift out of park while the engine running at idle and brake pedal applied. Cycling the ignition key off and restarting the engine will allow shift. Technicians may find DTC P0606-00 Control Module Processor. Flashing the ESM with the latest software will correct this concern.
NHTSA · boletim do fabricante10217407Anos-modelo 2016Exibido no inglês original · tradução pendenteVer detalhes →
Front Brake Squeak/Squeal Noise This bulletin involves cleaning excessive sealant from the front brake caliper adaptor brackets and replacing the adaptor bracket mounting bolts and/or replacing the front brake pads and related hardware. The customer may describe one or more of the front brake squeak/squeal noise symptoms/conditions: ? Squeak/squeal noise during moderate brake apply combined with light steering. The noise typically occurs with warm brakes after several brake applications. ? Squeak/squeal noise during low speed brake apply with vehicle moving forward or reverse. The noise typically only occurs after the vehicle sits overnight in colder ambient temperatures and the noise will go away after a few brake applications.
NHTSA · boletim do fabricante10216149Anos-modelo 2016Exibido no inglês original · tradução pendenteVer detalhes →
Flash: Vehicle Will Not Shift Out Of Park This bulletin involves reprogramming the Electronic Shift Module (ESM) with the latest available software. Some Customers may experience a condition where the vehicle will not shift out of park while the engine running at idle and brake pedal applied. Cycling the ignition key off and restarting the engine will allow shift. Technicians may find DTC P0606-00 Control Module Processor. Flashing the ESM with the latest software will correct this concern.
NHTSA · boletim do fabricante10216169Anos-modelo 2016Exibido no inglês original · tradução pendenteVer detalhes →
SEAL, Input If looking to replace stubshaft due to ATX fluid leaking, do not replace PTU seals. None of the seals from the PTU side will need to be replaced whenever the ATX stubshaftis replaced, even though V-seal (68408748A$) is in direct contact with the stubshaft,it will not avoid grease/oil leakage from transmission side. PTU V-seals are intended to act as a dust cover for stubshaft-PTU input shaft spline interface. PTU Input shaft seal (68408749A$) is intended to hold PTU oil and debris ingress; it should be replaced only if the fluid leakage is confirmed to be PTU oil and not ATX trans. fluid.
NHTSA · boletim do fabricante10168388Anos-modelo 2019Exibido no inglês original · tradução pendenteVer detalhes →
Inoperative Blue And Me Steering Wheel Button This bulletin involves performing a Body Control Module (BCM) Proxi Configuration. The customer may notice that the buttons on the steering wheel for Blue and Me may stop working. Also for customers in Canada and Mexico, they may notice that the Tire Pressure Monitor System (TPMS) ?Winter Mode? feature is missing.
NHTSA · boletim do fabricante10160016Anos-modelo 2015Exibido no inglês original · tradução pendenteVer detalhes →
Flash: Vehicle Will Not Shift Out Of Park This bulletin involves reprogramming the Electronic Shift Module (ESM) with the latest available software. Some Customers may experience a condition where the vehicle will not shift out of park while the engine running at idle and brake pedal applied. Cycling the ignition key off and restarting the engine will allow shift. Technicians may find DTC P0606-00 Control Module Processor. Flashing the ESM with the latest software will correct this concern.
NHTSA · boletim do fabricante10151750Anos-modelo 2016Exibido no inglês original · tradução pendenteVer detalhes →
Front Brake Squeak/Squeal Noise This bulletin involves cleaning excessive sealant from the front brake caliper adaptor brackets and replacing the adaptor bracket mounting bolts and/or replacing the front brake pads and related hardware. The customer may describe one or more of the front brake squeak/squeal noise symptoms/conditions: ? Squeak/squeal noise during moderate brake apply combined with light steering. The noise typically occurs with warm brakes after several brake applications. ? Squeak/squeal noise during low speed brake apply with vehicle moving forward or reverse. The noise typically only occurs after the vehicle sits overnight in colder ambient temperatures and the noise will go away after a few brake applications.
NHTSA · boletim do fabricante10151730Anos-modelo 2016Exibido no inglês original · tradução pendenteVer detalhes →
Flash: 1.4L Diagnostic And System Improvements This bulletin involves selectively erasing and reprogramming the Powertrain Control Module (PCM) with new software. A small number of customers may experience a crank no start condition in extreme cold temperatures of -4F (-20C) partially due to the available fuel blend conditions, They may also experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the Technician may find that Diagnostic Trouble Code P0141 - O2 SENSOR 1/2 HEATER PERFORMANCE has been set in the PCM.
NHTSA · boletim do fabricante10150556Anos-modelo 2015Exibido no inglês original · tradução pendenteVer detalhes →
Flash: 1.4L Diagnostic And System Improvements This bulletin involves selectively erasing and reprogramming the Powertrain Control Module (PCM) with new software. A small number of customers may experience a crank no start condition in extreme cold temperatures of -4F (-20C) partially due to the available fuel blend conditions, They may also experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the Technician may find that Diagnostic Trouble Code P0141 - O2 SENSOR 1/2 HEATER PERFORMANCE has been set in the PCM.
NHTSA · boletim do fabricante10150537Anos-modelo 2015Exibido no inglês original · tradução pendenteVer detalhes →
Flash: 1.4L Diagnostic And System Improvements This bulletin involves selectively erasing and reprogramming the Powertrain Control Module (PCM) with new software. A small number of customers may experience a crank no start condition in extreme cold temperatures of -4F (-20C) partially due to the available fuel blend conditions. They may also experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the Technician may find that Diagnostic Trouble Code P0141 - O2 SENSOR 1/2 HEATER PERFORMANCE has been set in the PCM. Additional DTC Diagnostic Improvements: ? P1046 - Cylinder 1 Oil Supply Solenoid Valve Overcurrent. ? P1048 - Cylinder 2 Oil Supply Solenoid Valve Overcurrent. ? P104A - Cylinder 3 Oil Supply Solenoid Valve Overcurrent. ? P104C - Cylinder 4 Oil Supply Solenoid Valve Overcurrent.
NHTSA · boletim do fabricante10149703Anos-modelo 2015Exibido no inglês original · tradução pendenteVer detalhes →
Antenna Mast Will Not Screw Into Base This bulletin involves inspecting and installing the correct antenna mast, if required. The dealer may not be able to install the antenna mast to the antenna base. The mast may have the incorrect thread pitch (1.0 mm) and will not screw into the base. The mast should have a thread pitch of 0.8 mm.
NHTSA · boletim do fabricante10148950Anos-modelo 2016Exibido no inglês original · tradução pendenteVer detalhes →
Flash: 1.4L Diagnostic And System Improvements This bulletin involves selectively erasing and reprogramming the Powertrain Control Module (PCM) with new software. A small number of customers may experience one of the following conditions or a a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the Technician may find a Diagnostic Trouble Code has been set in the PCM. ? P0141 - O2 Sensor 1/2 Heater Performance. ? Crank no start condition in extreme cold temperatures of -4F (-20C) partially due to the available fuel blend conditions. Additional Software Improvements Include: ? P1046 - Cylinder 1 Oil Supply Solenoid Valve Overcurrent. ? P1048 - Cylinder 2 Oil Supply Solenoid Valve Overcurrent. ? P104A - Cylinder 3 Oil Supply Solenoid Valve Overcurrent. ? P104C - Cylinder 4 Oil Supply Solenoid Valve Overcurrent.
NHTSA · boletim do fabricante10148992Anos-modelo 2015Exibido no inglês original · tradução pendenteVer detalhes →
Inoperative Blue And Me Steering Wheel Button This bulletin involves performing a BCM Proxi Configuration. The customer may notice that the buttons on the steering wheel for Blue and Me may stop working. Also for customers in Canada and Mexico, they may notice that the Tire Pressure Monitor System (TPMS) ?Winter Mode? feature is missing.
NHTSA · boletim do fabricante10148900Anos-modelo 2015Exibido no inglês original · tradução pendenteVer detalhes →
RA4 Radio Enhancements This bulletin involves upgrading the software on the RA4 Radio. The customer may experience one or more of the following: ? Travel Link soft key missing (U.S. only). ? Weather map now available for SXM (U.S. only). ? Cannot select different map displays. ? Point Of Interest (POI) cannot be added as waypoints. ? Conference calls may not display all active callers. ? Improve iPod response time, to start playing audio. ? Browsing knob inoperative after exiting Short Message Service (SMS). ? ?Where Am I? feature inoperative while driving. ? When using iPod touch, the incorrect song name may be displayed. ? May not display Auto Park Brake menu, if equipped. ? Cannot create a new SMS, using phone numbers. ? Display the correct message, when in service mode. ? Poor or no audio from the radio, also radio controls may not respond. On further inspection the technician my find DTC B223B-00 Vehicle Configuration Mismatch. ? False error message while in service brake mode. ? Personal setting lost after key cycle, dynamic guidelines and Show Time bar. IMPROVEMENTS ? Display Travel Link soft key on more of the display screens (U.S. only). ? Display the correct media screen when using iPod touch. ? Improve screen layouts during media playback. ? Improved SMS screen displays. ? Correctly display speed lockout messages. ? Color improvements on navigation map. ? Improved chime warning volumes. ? Browsing improvements for Bluetooth audio. ? Improved conference call handling. ? Improved Voice Recognition (VR) commands for AM radio request.
NHTSA · boletim do fabricante10148663Anos-modelo 2016Exibido no inglês original · tradução pendenteVer detalhes →
Electronic Power Steering System (EPS) Instrument Cluster Lamp ON This bulletin involves reprogramming the Electric Power Steering (EPS) module with the latest available software to correct an erroneous EPS lamp illumination. The customer may describe the Power Steering System Warning lamp is illuminated on the instrument cluster. Upon further inspection, the technician may find the following Diagnostic Trouble Code (DTC): C1214-87 Conf Data Code Request Message - Missing Message error set in the EPS control unit.
NHTSA · boletim do fabricante10148690Anos-modelo 2016Exibido no inglês original · tradução pendenteVer detalhes →
Flash: 1.4L Diagnostic And System Improvements This bulletin involves reprogramming the Powertrain Control Module (PCM) with the latest available software. Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find that the following Diagnostic Trouble Codes (DTCs) have been set: P1128-00 - Closed Loop Fueling Not Achieved - Bank 1 Upstream. P1524-00 - Oil Pressure Out Of Range - Camshaft Advance/Retard Disabled (Sales Code EAF only). P1607-00 - PCM Internal Shutdown Timer Rationality (Sales Code EAB only). P2610-00 - PCM Internal Engine Off Timer Performance (Sales Code EAB only). P1239-00 - Engine Oil Temperature Too Low (Sales Code EAB only). P0298-00 - Engine Oil Temperature Too High (Sales Code EAB only). P2299-00 - Brake Pedal Position/Accelerator Pedal Position Incompatible. P0456-00 - Evap System Small Leak. Some customers may also experience the following conditions: Intermittent fast crank condition. Cranks as if no compression. Intermittent crank - no start condition. In addition, the following software enhancement is available: ** Scan tool enhancements to communicate with wiTECH to read DTCs descriptions for 2013 MY vehicles equipped with manual transmissions (Sales Code DDF) and Euro 4 Emission W/OBD (Sales Code NB4).** Improved reverse lamp activation time.
NHTSA · boletim do fabricante10140265Anos-modelo 2012Exibido no inglês original · tradução pendenteVer detalhes →
Convergence Telematics Module (CTM) Software Enhancements This bulletin involves updating the Convergence Telematics Module (CTM) software. The customer may notice the steering wheel controls and USB functionality may not operate properly after the ignition is cycled.
NHTSA · boletim do fabricante10139889Anos-modelo 2015Exibido no inglês original · tradução pendenteVer detalhes →
Convergence Telematics Module (CTM) Software Enhancements This bulletin involves updating the Convergence Telematics Module (CTM) software. The customer may notice the steering wheel controls and USB functionality may not operate properly after the ignition is cycled.
NHTSA · boletim do fabricante10139863Anos-modelo 2015Exibido no inglês original · tradução pendenteVer detalhes →
Fontes: NHTSA (Estados Unidos, domínio público), Transport Canada (Open Government Licence – Canada), DVSA (Reino Unido, Open Government Licence v3.0), RappelConso e Safety Gate da UE (França, Licence Ouverte 2.0), MLIT (Japão, Licença de Dados Públicos 1.0) e MOLIT (Coreia do Sul, car.go.kr).