Leitura livre · conta gratuita para contribuirSucessor do Anticars (2000)

Ford Explorer V

2010–2019 · 15 defeitos documentados · 5 mercados

Os boletins técnicos (TSB) são instruções de reparação que os fabricantes enviam aos concessionários sobre problemas conhecidos. Não são recalls de segurança, mas muitas vezes confirmam um defeito.

Ano do modelo
MercadoTodosNA
BoletimModeradoCâmbioNA

Boletim

Certain 2019 Model Year Police Interceptor Utility Vehicles Equipped with a 3.7L Engine Catalytic Converter Extended Coverage In the affected vehicles, it may be possible that aggressive law enforcement driving maneuvers can result in an overheated catalytic converter, catalyst degradation, and an illuminated malfunction indicator light (MIL) with diagnostic trouble codes (DTCs) P0420 and/or P0430 stored in the powertrain control module (PCM)

NHTSA · boletim do fabricante10231023Anos-modelo 2019Exibido no inglês original · tradução pendenteVer detalhes →
BoletimModeradoElétricaNA

Boletim

Some 2018 Explorer/Police Interceptor Utility vehicles equipped with Police, Base 100A, or XLT 200A package trim levels (Type 1 analog cluster in the Owner's Manual) built on 08-May-2018 and through 05-Aug-2018 may exhibit a parasitic battery drain of approximately 250 milliamps with the instrument panel cluster (IPC) possibly staying awake with the key off. This may result in a no crank/no start/discharged battery condition. To resolve the concern, reprogram the IPC using the latest software level using the Integrated Diagnostic System (IDS). Make sure the vehicle is connected to a battery charger. For claiming, use causal part 10849 and applicable labor operations in Section 10 of the Service Labor Time Standards (SLTS) Manual.

NHTSA · boletim do fabricante10216541Anos-modelo 2018Exibido no inglês original · tradução pendenteVer detalhes →
BoletimModeradoSuspensãoNA

Boletim

Some 2016 Explorer vehicles equipped with factory remote start (on the key fob) may exhibit erratic operation of the climate control seats and/or heated steering wheel during a remote start event. Examples of this may include: cooled seats when the last setting commanded heated seats, inoperative/deactivated heated steering wheel, etc. This may be due to a software concern within the HVAC control module. To correct this condition, update the HVAC control module to the latest software level using the latest version of the IDS service scan tool. For claiming use causal part number 19980 and refer to applicable labor times found in Section 10 of the Service Labor Time Standards (SLTS) Manual.

NHTSA · boletim do fabricante10207116Anos-modelo 2016Exibido no inglês original · tradução pendenteVer detalhes →
BoletimModeradoInteriorNA

Boletim

49 CFR Part 579.5 Monthly Communications - March 2016 Air bag warning light illuminated with diagnostic trouble code (DTC) B141B and/or B141C

NHTSA · boletim do fabricante10204987Anos-modelo 2016Exibido no inglês original · tradução pendenteVer detalhes →
BoletimModeradoCarroceriaNA

Boletim

Some 2016-2017 Ford and Lincoln vehicles with a new body control module (BCM) installed may exhibit a programming error when using IDS versions 122.03 through 123.01 stating 'Data Corrupt' or 'Configuration Failed, would you like to retry?'. IDS scan tool version 123.02 contains a fix for this programming error. Install IDS version 123.02 or later from PTS > Rotunda tab > Diagnostic Tool Support > Download Software. Once installed, perform the BCM programmable module installation (PMI). Refer to Workshop Manual (WSM), Section 419-10 > Removal and Installation.

NHTSA · boletim do fabricante10201582Anos-modelo 2016Exibido no inglês original · tradução pendenteVer detalhes →
BoletimModeradoCarroceriaNA

Boletim

Some 2016-2017 Ford and Lincoln vehicles with a new Body Control Module (BCM) installed may exhibit a programming error using IDS v122.03 and newer stating "Data Corrupt" or Configuration Failed, would you like to retry?. A temporary work around has been released to complete the BCM programming process. Uninstall IDS from the computer. Run the IDS clean up utility tool located on PTS > Rotunda Tab > Diagnostic Tool Support > IDS Support > IDS troubleshooting guide. Install IDS v122.01 (122_FULL) by copying the following link into an internet address bar https://www.fordservicecontent.com/Ford_Content/IDS/SoftwareUpdates/IDS-122.01_full.exe. Retry the BCM Programmable Module Installation (PMI) using IDS level 122.01. Monitor OASIS for updates.

NHTSA · boletim do fabricante10201024Anos-modelo 2016Exibido no inglês original · tradução pendenteVer detalhes →
BoletimModeradoFreiosNA

Boletim

In some of the affected vehicles, Hill Start Assist (HSA), a driver convenience feature, is not enabled due to a software issue in the Anti-lock Brake System (ABS) module. The HSA feature makes it easier to pull away from a stop when a vehicle is on a slope. HSA should be enabled when the driver removes their foot from the brake pedal after holding brake pressure for 2-3 seconds on a slope.

NHTSA · boletim do fabricante10178057Anos-modelo 2019Exibido no inglês original · tradução pendenteVer detalhes →
BoletimModeradoFreiosNA

Boletim

Certain 2019 Model Year Explorer Anti-lock Brake System Module Software Update

NHTSA · boletim do fabricante10164614Anos-modelo 2019Exibido no inglês original · tradução pendenteVer detalhes →
BoletimModeradoFreiosNA

Boletim

Customer Satisfaction Program 19B12 Certain 2019 Model Year Explorer Supplement #1 Anti-lock Brake System Module Software Update

NHTSA · boletim do fabricante10163601Anos-modelo 2019Exibido no inglês original · tradução pendenteVer detalhes →
BoletimModeradoFreiosNA

Boletim

Certain 2019 Model Year Explorer - Anti-lock Brake System Module Software Update

NHTSA · boletim do fabricante10160953Anos-modelo 2019Exibido no inglês original · tradução pendenteVer detalhes →
BoletimModeradoFreiosNA

Boletim

Certain 2019 Model Year Explorer - Anti-lock Brake System Module Software Update

NHTSA · boletim do fabricante10160951Anos-modelo 2019Exibido no inglês original · tradução pendenteVer detalhes →
BoletimModeradoFreiosNA

Boletim

Some 2019 Explorer/Police Interceptor Utility vehicles built on 10-Sep-2018 and through 07-Feb-2019 may exhibit a lack of hill start assist when the vehicle is stopped on an incline greater than 1.5 degrees. If no diagnostic trouble codes (DTCs) are stored in the anti-lock brake system (ABS) module, reprogram the ABS module using the latest software level of the appropriate Ford diagnostic scan tool. For claiming, use causal part 2C219 and applicable labor operations in Section 02 of the Service Labor Time Standards (SLTS) Manual.

NHTSA · boletim do fabricante10156481Anos-modelo 2019Exibido no inglês original · tradução pendenteVer detalhes →
BoletimModeradoElétricaNA

Boletim

Some 2018 Explorer/Police Interceptor Utility vehicles equipped with Police, Base 100A, or XLT 200A package trim levels (Type 1 analog cluster in the Owner's Manual) built on 08-May-2018 and through 05-Aug-2018 may exhibit a parasitic battery drain of approximately 250 milliamps with the instrument panel cluster (IPC) possibly staying awake with the key off. This may result in a no crank/no start/discharged battery condition. To resolve the concern, reprogram the IPC using the latest software level of the appropriate Ford diagnostic scan tool. Make sure the vehicle is connected to a battery charger. For claiming, use causal part 10849 and applicable labor operations in Section 10 of the Service Labor Time Standards (SLTS) Manual.

NHTSA · boletim do fabricante10149757Anos-modelo 2018Exibido no inglês original · tradução pendenteVer detalhes →
BoletimModeradoFreiosNA

Boletim

Certain 2018 Model Year Explorer And Police Interceptor Utility Vehicles Key Off Load Battery Drain Certain 2018 Model Year MKZ Hybrid Vehicles Equipped with the Magnetic Appearance Package - Accelerator Pedal and Brake Pedal Cover Replacement

NHTSA · boletim do fabricante10148743Anos-modelo 2018Exibido no inglês original · tradução pendenteVer detalhes →
BoletimModeradoFreiosNA

Boletim

Some 2018 F-Superduty/F-150/Explorer/Taurus/Flex/MKT/Fiesta vehicles built on 8-Mar-2018 and through 18-Jun-2018 may exhibit a soft brake pedal and/or long brake pedal travel. Bleed the brake system per Workshop Manual (WSM), Section 206-00. For claiming, use causal part BRAKE and applicable labor operations in Section 02 of the Service Labor Time Standards (SLTS) Manual.

NHTSA · boletim do fabricante10144938Anos-modelo 2018Exibido no inglês original · tradução pendenteVer detalhes →
BoletimModeradoElétricaNA

Boletim

Some 2018 Explorer/Police Interceptor Utility vehicles equipped with Police, Base 100A, or XLT 200A package trim levels (Type 1 analog cluster in the Owner's Manual) built on 08-May-2018 and through 05-Aug-2018 may exhibit a parasitic battery drain of approximately 250 milliamps with the instrument panel cluster (IPC) possibly staying awake with the key off. This may result in a no crank/no start/discharged battery condition. To resolve the concern, reprogram the IPC using the latest software level of the appropriate Ford diagnostic scan tool. For claiming, use causal part 10849 and applicable labor operations in Section 10 of the Service Labor Time Standards (SLTS) Manual.

NHTSA · boletim do fabricante10144946Anos-modelo 2018Exibido no inglês original · tradução pendenteVer detalhes →
BoletimModeradoFreiosNA

Boletim

Some 2018 F-Superduty/F-150/Explorer/Taurus/Flex/MKT/Expedition/Navigator vehicles built on 8-Mar-2018 and through 18-Jun-2018 may exhibit a soft brake pedal and/or long brake pedal travel. Bleed the brake system per Workshop Manual (WSM), Section 206-00. For claiming, use causal part 2552 and applicable labor operations in Section 02 of the Service Labor Time Standards (SLTS) Manual.

NHTSA · boletim do fabricante10144948Anos-modelo 2018Exibido no inglês original · tradução pendenteVer detalhes →
BoletimModeradoFreiosNA

Boletim

Some 2018 F-Superduty/F-150/Explorer/Taurus/Flex/MKT vehicles built on 8-Mar-2018 and through 18-Jun-2018 may exhibit a soft brake pedal and/or long brake pedal travel. Bleed the brake system per Workshop Manual (WSM), Section 206-00. For claiming, use causal part BRAKE and applicable labor operations in Section 02 of the Service Labor Time Standards (SLTS) Manual.

NHTSA · boletim do fabricante10144933Anos-modelo 2018Exibido no inglês original · tradução pendenteVer detalhes →
BoletimModeradoFreiosNA

Boletim

Some 2018 Explorers equipped with Platinum trim level built on 25-Oct-2017 and through 01-May-2018 may intermittently display a "Hill Descent Control Fault" message in the IPC briefly at start up without any diagnostic trouble codes (DTCs) stored in the anti-lock brake system (ABS) module. Reprogram the IPC using the appropriate Ford scan tool or equivalent release 110.03 or higher. Make sure you are connected to the internet when entering module programming to obtain the latest updates. For claiming, use causal part 10849 and applicable labor operations in Section 10 of the Service Labor Time Standards (SLTS) Manual.

NHTSA · boletim do fabricante10144208Anos-modelo 2018Exibido no inglês original · tradução pendenteVer detalhes →
BoletimModeradoFreiosNA

Boletim

Some 2018 Explorers equipped with Platinum trim level built on 25-Oct-2017 and through 01-May-2018 may intermittently display a "Hill Descent Control Fault" message in the IPC briefly at start up without any diagnostic trouble codes (DTCs) stored in the anti-lock brake system (ABS) module. Do not attempt any repairs at this time. Engineering is investigating, monitor OASIS for updates.

NHTSA · boletim do fabricante10143081Anos-modelo 2018Exibido no inglês original · tradução pendenteVer detalhes →
BoletimModeradoElétricaNA

Boletim

Some 2018 Ford and Lincoln vehicles equipped with a TCU may exhibit inoperative remote features via Ford Pass/Lincoln Way mobile app, incomplete user authorization and/or accessory protocol interface module (APIM) DTC U0198 or no modem electronic serial number (ESN) displayed. To correct this condition, remove the TCU fuse for 5 minutes then reinstall. Make sure you are connected to the internet before retesting. If the concern is still present, follow normal diagnostics in Workshop Manual (WSM), Section 415-00. Refer to PTS OASIS home page for TCU version identification. For claiming, use causal part 14G229.

NHTSA · boletim do fabricante10137130Anos-modelo 2018Exibido no inglês original · tradução pendenteVer detalhes →
BoletimModeradoOutroNA

Boletim

Certain 2014 Model Year Police Interceptor Sedan and 2014-2016 Model Year Police Interceptor Utility Vehicles - Canister Purge Valve Leaks

NHTSA · boletim do fabricante10125091Anos-modelo 2016Exibido no inglês original · tradução pendenteVer detalhes →
BoletimModeradoFreiosNA

Boletim

Some 2017 Explorer, Taurus, Police Interceptor vehicles built on 19-May-2017 and through 30-May-2017 equipped with a fixed brake pedal assembly may exhibit a brake drag concern or residual pressure in the brake system with the brake pedal fully released. This may be due to an interference condition between the brake pedal arm stop lamp switch bracket and the booster push rod clevis pin bracket. Inspect for a touch condition between the brake pedal arm stop lamp switch bracket and the brake booster push rod clevis pin bracket. If a touch condition exists, replace the brake pedal assembly. For claiming, use causal part 2C434 and applicable labor operations in section 2 of the service labor time standards (SLTS) manual.

NHTSA · boletim do fabricante10125073Anos-modelo 2017Exibido no inglês original · tradução pendenteVer detalhes →
BoletimModeradoMotorNA

Boletim

2017 vehicles equipped with a 2.0L GTDI, 2.3L GTDI, or 2.5L PFI engine will either be equipped with a diamond washer on each side of a smooth-faced crankshaft timing sprocket (early build), or a crankshaft timing sprocket with laser etched faces and no diamond washers (late build). If equipped, diamond washers should be cleaned, inspected and reused, if undamaged. Diamond washers should never be installed along with a laser etched crankshaft timing sprocket. Related WSM procedure information is in the process of being updated.

NHTSA · boletim do fabricante10119671Anos-modelo 2017Exibido no inglês original · tradução pendenteVer detalhes →
BoletimModeradoElétricaNA

Boletim

Some 2016-2017 Ford and Lincoln vehicles with SYNC 3 may exhibit an intermittent blue or black screen. Check for SYNC software update under the OASIS Tab SYNC selection. If update is available refer to WSM, Section 415-00 and update APIM software. After Installation Complete pop-up appears, remove USB flash drive and install into IDS tool to update Ford database. Perform a complete ignition cycle by turning the key off for 5 minutes which is critical for a successful installation. If no updates are available or a blue or black screen is present after an update refer to WSM, Section 415-00 for diagnosis or SYNC 3 intermittent blank screen GSB for tips. For claiming, use causal part 14G371 and applicable labor operations in section 10 of the SLTS manual.

NHTSA · boletim do fabricante10119678Anos-modelo 2017Exibido no inglês original · tradução pendenteVer detalhes →
Mais antigos →

Fontes: NHTSA (Estados Unidos, domínio público), Transport Canada (Open Government Licence – Canada), DVSA (Reino Unido, Open Government Licence v3.0), RappelConso e Safety Gate da UE (França, Licence Ouverte 2.0), MLIT (Japão, Licença de Dados Públicos 1.0) e MOLIT (Coreia do Sul, car.go.kr).