The normal lockup function of the automatic (passive) belt reel can cause the belt motor winch assembly to lockup such that the passive belt system will not deploy/function or gets stuck at various points along the track causing the kinking or breaking of its cable or detachment of the tongue.
NHTSA · Estados Unidos1 de nov. de 199393V179000Anos-modelo 1987–1989Exibido no inglês original · tradução pendenteVer detalhes →
O cabo de alta tensão da bobina de ignição pode se deslocar de sua posição original, aproximando-se da mangueira do injetor de combustível #4a. Isso pode resultar em degradação por ozônio da mangueira do injetor e possíveis vazamentos de combustível. Tais vazamentos podem causar um incêndio no compartimento do motor.
Correção: Os cabos de alta tensão ("king leads") de ambos os bancos "a" e "b" serão substituídos. A mangueira do injetor #4 será inspecionada quanto a sinais de rachaduras/fissuras e substituída, se necessário.
Transport Canada23 de jan. de 19921992005Anos-modelo 1989–1991Traduzido automaticamente · original: inglêsVer detalhes →
The high tension lead from the ignition coil can move from the production location closer to the #4a fuel injector hose. This could lead to the outer and inner injector hoses cracking or splitting from ozone deterioration.
Translation:
O cabo de alta tensão da bobina de ignição pode se deslocar da posição de fábrica e se aproximar da mangueira do injetor de combustível #4a. Isso pode levar à rachadura ou ao rompimento das mangueiras externa e interna do injetor, causados pela deterioração por ozônio.
NHTSA · Estados Unidos23 de jan. de 199292V009000Anos-modelo 1989–1991Traduzido automaticamente · original: inglêsVer detalhes →
Note: 1978-90 models excessive fuel vapour pressure can occur such that a weakening of the fuel tank structure can result in fuel leaks. In the presence of an ignition source, a vehicle fire could result. Correction: Dealers will install a revised fuel purge system which eliminates excessive vapour pressure build-up.
Transport Canada27 de jul. de 19901990114Anos-modelo 1983–1991Exibido no inglês original · tradução pendenteVer detalhes →
Uma pressão excessiva de vapor de combustível pode ocorrer e, após ciclos prolongados de funcionamento, enfraquecer a estrutura do tanque de combustível.
NHTSA · Estados Unidos2 de jul. de 199090V123000Anos-modelo 1980–1990Traduzido automaticamente · original: inglêsVer detalhes →
Xj-s 1982-90 xj12/vanden plas 1980-90 dirt ingress may cause the electronically controlled valves in the cruise control actuator to malfunction. If this occurs, the cruise control will fail to disengage under normal operating conditions resulting in possible loss of driver control. Correction: Cruise control actuator operation will be checked and an additional vacuum dump will be installed.
Transport Canada21 de fev. de 19901990034Anos-modelo 1982–1990Exibido no inglês original · tradução pendenteVer detalhes →
Possível vazamento de combustível do sistema de injeção de combustível do motor, particularmente na região das conexões de mangueira/abraçadeira. Consequência do defeito: a presença de uma fonte de ignição, com vazamento de combustível, poderia resultar em incêndio no compartimento do motor ou na destruição da tampa do distribuidor de ignição.
NHTSA · Estados Unidos3 de jul. de 198585V087000Anos-modelo 1980–1985Traduzido automaticamente · original: inglêsVer detalhes →
Due to misalignment of fuel rail halves and effects of temperature change on the connections, there is the possibility of fuel leakage at the fuel rail joints. Fuel leakage could present the potential for fire. Vin - xj12 - 310613 to 365261 xjs - 104146 to 111980
Transport Canada20 de dez. de 19831983118Anos-modelo 1980–1982Exibido no inglês original · tradução pendenteVer detalhes →
Fuel leakage may develop at the two main fuel rail connections. Deterioration at these two connections has been traced to a combination of misalignment of the two rail halves and the effect of temperature changes.
NHTSA · Estados Unidos20 de dez. de 198383V135000Anos-modelo 1980–1983Exibido no inglês original · tradução pendenteVer detalhes →
Certain vehicles could be subject to a fuel leakage in the engine compartment due to the possibility of deterioration in the integrity of the high pressure fuel hose connections.
NHTSA · Estados Unidos27 de out. de 198181V134000Anos-modelo 1980–1982Exibido no inglês original · tradução pendenteVer detalhes →
V.I.N. Xj12 - 310613 to 431598 xjs - 104146 to 125224 a potential exists for leakage from the fuel delivery system which could result in engine compartment fires.
Transport Canada3 de jul. de 19851985080Anos-modelo 1980–1985Exibido no inglês original · tradução pendenteVer detalhes →
The supplier of the fuel cut-off inertia switch made unauthorized changes to the switch contacts. Under certain conditions a high electrical resistance and open circuit may result, preventing current flow to the fuel pump.
Transport Canada22 de mar. de 19821982030Anos-modelo 1981–1982Exibido no inglês original · tradução pendenteVer detalhes →
Certain vehicles may be fitted with an unauthorized fuel pump electrical inertia switch. This switch has a tin coating added to the contacts that create the potential for a high electrical resistance. This could cause overheating and possible distortion of the plastic mounting around the fixed contact. This could result in inability to start the vehicle since there is a flow of current to the fuel pump.
NHTSA · Estados Unidos9 de mar. de 198282V022000Anos-modelo 1982Exibido no inglês original · tradução pendenteVer detalhes →
Fontes: NHTSA (Estados Unidos, domínio público), Transport Canada (Open Government Licence – Canada), DVSA (Reino Unido, Open Government Licence v3.0), RappelConso e Safety Gate da UE (França, Licence Ouverte 2.0), MLIT (Japão, Licença de Dados Públicos 1.0) e MOLIT (Coreia do Sul, car.go.kr).