Em alguns interruptores de ignição, foi aplicada graxa em excesso em determinados pontos de contato. Para um veículo utilizado nessas condições, isso pode levar à carbonização da graxa se e, portanto, a um risco acrescido de incêndio.
Safety Gate · UE · RappelConso · França15 de dez. de 2022a12/00507/22Anos-modelo 1989–2002Traduzido automaticamente · original: francêsVer detalhes →
Com o tempo, os contatos internos do interruptor de ignição podem se carbonizar e tornar-se condutores de eletricidade. Como resultado, o interruptor de ignição pode superaquecer, havendo risco de incêndio.
Safety Gate · UE6 de out. de 2016A12/1298/16Anos-modelo 1986–1999Traduzido automaticamente · original: inglêsVer detalhes →
A graxa carbonizada pode se acumular entre os pontos de contato no interruptor de ignição, reduzindo o desempenho de isolamento no interior do interruptor. Nessa condição, o interruptor pode gerar calor, resultando em fumaça e, no pior dos casos, em incêndio.
DVSA · Reino Unido30 de set. de 2016R/2016/210Anos-modelo 1989–2002Traduzido automaticamente · original: inglêsVer detalhes →
On certain vehicles, an external spring in the timing belt auto tensioner may break. The broken spring may get caught in the timing belt, resulting in possible engine stalling. Correction: Dealers will inspect the tensioner on affected vehicles and replace if necessary.
Transport Canada14 de jun. de 20002000125Anos-modelo 1998Exibido no inglês original · tradução pendenteVer detalhes →
Certain vehicles do not comply with the requirements of CMVSS. 1103 - Exhaust Emissions. The average CO of the subject vehicles may exceed the standard due to insufficient robustness of emission control logic, and calibration of emission parts with extended usage. Correction: Dealers will install an engine intake kit, which will allow additional air to enter the engine, improving combustion efficiency and lowering the levels of carbon monoxide.
Transport Canada30 de nov. de 19991999220Anos-modelo 1995Exibido no inglês original · tradução pendenteVer detalhes →
Certain vehicles do not comply with the requirements of CMVSS 1105 - Evaporative Emissions. Fuel vapour may leak from between the fuel cap and the fuel filler pipe. The gap could be generated by improper dimensions between the top ends of the inner and outer pipe of the fuel filler pipe. In some cases, raw fuel would be released into the atmosphere. Correction: Dealers will install a modified fuel cap o-ring.
Transport Canada14 de abr. de 19991999057Anos-modelo 1995–1997Exibido no inglês original · tradução pendenteVer detalhes →
On certain vehicles, an external spring in the timing belt auto tensioner may break. The broken spring may get caught in the timing belt, resulting in possible engine stalling. Correction: Vehicles will be inspected and affected tensioners will be replaced.
Transport Canada11 de set. de 19981998178Anos-modelo 1997Exibido no inglês original · tradução pendenteVer detalhes →
The engine may stop while driving and can not be restarted. The strength of the inner part of the spill valve on the fuel injection pump is insufficient and may fail as a result of repeated injection pressure. As a result fuel can not be injected into the combustion chambers.
DVSA · Reino Unido7 de set. de 1998R/1998/073Exibido no inglês original · tradução pendenteVer detalhes →
Note: Vehicles equipped with 2.0 litre engine. The powertrain control module (pcm) may trigger a shift in air-fuel ratio to an over-lean condition resulting in an engine stall. This could lead to loss of vehicle control and a possible vehicle crash. Correction: Pcm will be reprogrammed with the correct engine control logic.
Transport Canada17 de dez. de 19971997223Anos-modelo 1998Exibido no inglês original · tradução pendenteVer detalhes →
Vehicle description: Passenger vehicles. Due to a programming error, the powertrain control module (pcm) installed can, under certain driving conditions, trigger a shift in air-fuel ratio to an overlean condition.
NHTSA · Estados Unidos17 de dez. de 199797V228000Anos-modelo 1998Exibido no inglês original · tradução pendenteVer detalhes →
At ambient temperatures below -18 degrees celsius, frost may accumulate within the throttle body under conditions of extended constant speed operation. This could result in a heavy accelerator pedal and cause uneven throttle valve return. Correction: The single stage engine coolant thermostat will be replaced with a dual stage thermostat equipped with a subvalve to increase the temperature within the throttle body. V.I.N. Range: Jm1gd3120j1500014 to jm1gd2226j1573252.
Transport Canada18 de fev. de 19881988021Anos-modelo 1988Exibido no inglês original · tradução pendenteVer detalhes →
These vehicles may not comply with c.M.V.S.S. 124 -accelerator control systems. Vehicles equipped with electronic fuel injection.
Transport Canada13 de mar. de 19861986032Anos-modelo 1986Exibido no inglês original · tradução pendenteVer detalhes →
Fontes: NHTSA (Estados Unidos, domínio público), Transport Canada (Open Government Licence – Canada), DVSA (Reino Unido, Open Government Licence v3.0), RappelConso e Safety Gate da UE (França, Licence Ouverte 2.0), MLIT (Japão, Licença de Dados Públicos 1.0) e MOLIT (Coreia do Sul, car.go.kr).