Leitura livre · conta gratuita para contribuirSucessor do Anticars (2000)

MercuryMercury Capri

1979–1994 · 2 gerações · 9 defeitos documentados · 1 mercados
Gerações
Ano do modelo
MercadoTodosNA
Capri III · 1991–1994
RecallCríticoCarroceriaNA

Controle de velocidade do veículo

Em determinadas picapes, veículos de passeio, utilitários esportivos (SUVs) e chassis de motorhomes, o interruptor de desativação do controle de velocidade pode, sob certas condições, apresentar vazamento interno e, em seguida, superaquecer, soltar fumaça ou queimar.

NHTSA · Estados Unidos3 de ago. de 200707V336000Anos-modelo 1994Traduzido automaticamente · original: inglêsVer detalhes →
Capri III · 1991–1994
Capri II · 1979–1986
RecallCríticoInteriorNA

Assentos e Sistemas de Retenção

A exposição prolongada à luz solar pode fazer com que a luva plástica do conjunto da lingueta do cinto de segurança dianteiro, que retém a barra de travamento, se deteriore e saia da posição. Isso pode resultar na separação da lingueta da fita do cinto de segurança, tornando o cinto inútil para o ocupante do veículo. Correção: os proprietários serão informados de que a Ford fará o reparo dos cintos de segurança que apresentarem essa condição.

Transport Canada28 de set. de 19921992117Anos-modelo 1984–1985Traduzido automaticamente · original: inglêsVer detalhes →
Capri II · 1979–1986
RecallCríticoInteriorNA

Seat belts:Front:Anchorage

The plastic sleeve in the front safety belt tongue assembly which retains the lock bar can deteriorate from prolonged exposure to sunlight and become displaced, causing the tongue to detach from the safety belt webbing.

NHTSA · Estados Unidos29 de abr. de 199292V063000Anos-modelo 1984–1985Exibido no inglês original · tradução pendenteVer detalhes →
Capri III · 1991–1994
Capri II · 1979–1986
RecallCríticoMotorNA

Sistema de Combustível

On vehicles with EFI or CFI, the spring-lock fuel line coupling used to connect the fuel supply and return lines to the EFI fuel rails or to the CFI throttle bodies, as well as other fuel line connections near the dash panels on some vehicles, could disengage during vehicle use. Should this occur, loss of fuel will result, providing the potential for a vehicle fire. Correction: Coupling retainer clips will be installed on affected vehicles. Note: Escort vehicles are equipped with EFI and CFI. Lynx vehicles are equipped with CFI only. EFI - electronic fuel injection; CFI - central fuel injection

Transport Canada9 de set. de 19871987098Anos-modelo 1986–1987Traduzido automaticamente · original: inglêsVer detalhes →
Capri II · 1979–1986
RecallCríticoFreiosNA

Recall

The tandem power brake booster rear shells may have been produced with reduced wall thicknesses. Repeated brake applications could cau se such a shell to crack and the booster assembly to come apart.This could result in a total loss of braking capabilty without prior warn ing and present the possibility for loss of control and vehicle cras h.

Transport Canada31 de mai. de 19851985070Anos-modelo 1985Exibido no inglês original · tradução pendenteVer detalhes →
Capri III · 1991–1994
RecallModeradoInteriorNA

Airbags

Os módulos de airbag não atendem às especificações da Ford para desempenho em altas temperaturas ambiente.

NHTSA · Estados Unidos2 de jun. de 199292V080000Anos-modelo 1991–1992Traduzido automaticamente · original: inglêsVer detalhes →
Capri II · 1979–1986
RecallModeradoInteriorNA

Seats And Restraints

The forward screw which provides part of the attachment between the driver`s seat back assembly and the seat cushion frame could fracture and permit the driver's seat back to pivot rearward. Such a condition could adversely affect the driver's ability to control the vehicle and could result in a vehicle crash. Correction: New driver's seat cushion attachment screws will be installed on affected vehicles.

Transport Canada17 de mai. de 19881988066Anos-modelo 1981–1983Exibido no inglês original · tradução pendenteVer detalhes →
Capri II · 1979–1986
RecallModeradoFreiosNA

Service brakes, hydraulic:Power assist:Vacuum

Brake booster rear shells may have reduced wall thicknesses which could cause the shell to break. Consequence of defect: Repeated brake use could cause the shell to crack and the booster assembly to come apart. Service brakes capability would be totally lost without warning and could result in an accident.

NHTSA · Estados Unidos21 de mai. de 198585V068000Anos-modelo 1985Exibido no inglês original · tradução pendenteVer detalhes →
Capri II · 1979–1986
RecallModeradoMotorNA

Sistema de combustível, gasolina: Sistema de carburador

O eixo secundário da borboleta do acelerador pode, com a quilometragem acumulada, ficar contaminado e travar em posição parcialmente aberta durante a condução.

NHTSA · Estados Unidos2 de out. de 198484V119000Anos-modelo 1984Traduzido automaticamente · original: inglêsVer detalhes →
Capri II · 1979–1986
RecallModeradoMotorNA

Recall

Carburetor throttle shafts may be susceptible to dirt contamination and wear of the bearing coatings. This could cause the secondary throttle plates to remain partially open after the driver has released the accelerator pedal. This this were to occur, engine speed would not return to idle potentially affecting vehicle control and stopping distances.

Transport Canada28 de set. de 19841984117Anos-modelo 1984Exibido no inglês original · tradução pendenteVer detalhes →
Capri II · 1979–1986
RecallModeradoInteriorNA

Seat belts:Front:Anchorage

The bolts that attach the d-shaped ring for the shoulder belt are inadequately supported by the material in which they are mounted. The attachment does not comply with the requirements of federal motor vehicle safety standard no. 210, "seat belt assembly anchorages".

NHTSA · Estados Unidos20 de dez. de 198383V134000Anos-modelo 1984Exibido no inglês original · tradução pendenteVer detalhes →
Capri II · 1979–1986
RecallModeradoInteriorNA

Recall

The upper torso restraint d-ring which attaches the shoulder belt to the b pillar, under certain test conditions, separated from its anchorage, and may not comply with cmvss 210 - belt anchorage.

Transport Canada17 de dez. de 19831983114Anos-modelo 1984Exibido no inglês original · tradução pendenteVer detalhes →
Capri II · 1979–1986
RecallModeradoCarroceriaNA

Recall

Some of the vehciles affected by the recall may have been produced with incorrect hoods - the incorrect hoods were intended for use with conventional (non-turbo) engines and maynot provide a sufficient clearnace between the throttle linkage and the hood undersides. As a result, under certain conditions, the throttle linkage may come in contact with the hood potentially causing damage to the linkage and preventing the throttle from returning to its idle position.

Transport Canada21 de out. de 19831983088Anos-modelo 1983Exibido no inglês original · tradução pendenteVer detalhes →
Capri II · 1979–1986
RecallModeradoCarroceriaNA

Structure:Body:Hood

Inadequate clearance between the underside of the hood and the throttle linkage could damage the linkage and prevent the throttle from returning to idle position. This condition is due to installation of the incorrect hood style during vehicle assembly.

NHTSA · Estados Unidos21 de out. de 198383V110000Anos-modelo 1983Exibido no inglês original · tradução pendenteVer detalhes →
Capri II · 1979–1986
RecallModeradoInteriorNA

Recall

These vehicles do not comply with cmvss 209 - seat belt assemblies.

Transport Canada20 de dez. de 19821982102Anos-modelo 1980–1981Exibido no inglês original · tradução pendenteVer detalhes →
Capri II · 1979–1986
RecallModeradoInteriorNA

Seats:Front assembly:Recliner

The housing plates on the driver seat back latch recliner assemblies were manufactured with substandard material products. This tainted steel was used to produce seatback latches for both the right and left side seat assemblies. Under certain conditions, the defective housing plates may distort, allowing the locking teeth to disengage and tear off. This permits the seatback to pivot backwards.

NHTSA · Estados Unidos8 de set. de 198181V102000Anos-modelo 1981Exibido no inglês original · tradução pendenteVer detalhes →
Capri II · 1979–1986
RecallModeradoInteriorNA

Recall

Vehicles produced at dearborn assembly plant. Vehicles may have been equipped with driver seat back latch recliner assemblies that contain housing plates manufactured from suspect steel material. Under certain types of driver induced seat loading the recliner mechanism housing plates might distort allowing the locking teeth to disengage. This would allow the seat back to rotate rearward into a reclined position.

Transport Canada4 de set. de 19811981092Anos-modelo 1981Exibido no inglês original · tradução pendenteVer detalhes →
Capri II · 1979–1986
RecallModeradoCâmbioNA

Recall

Vehicles equipped with turbocharged 2.3l engines and manual transmissions. Vehicles may have been built without a particular electric curcuit in the idle tracking system wiring harness. This condition may cause exhaust emissions of hydrocarbon (hc) and carbon monoxide (co) gases to exceed the limits specified by canada motor vehicle safety standard 1103 - exhaust emissions.

Transport Canada7 de mai. de 19801980073Anos-modelo 1980Exibido no inglês original · tradução pendenteVer detalhes →
Capri II · 1979–1986
RecallModeradoMotorNA

Emissions

During the railcar chain-down operation or during in-transit railcar movement, the chain could interfere with and break the evaporative emission carbon canister. These vehicles would then not comply with canada motor vehicle safety standard 1105 - evaporative emissions.

Transport Canada6 de nov. de 19791979182Anos-modelo 1980Exibido no inglês original · tradução pendenteVer detalhes →
Capri II · 1979–1986
RecallLeveMotorNA

Emissões

Nota: Veículos com motores de 3,8 litros. Estes veículos podem não estar em conformidade com a C.M.V.S.S. 1103 - emissões de gases de escape. O material do substrato dos catalisadores pode chocalhar e se desintegrar durante o uso normal, fazendo com que as emissões de escape excedam o padrão. Correção: Os veículos serão inspecionados e o catalisador será substituído quando necessário.

Transport Canada21 de ago. de 19921992098Anos-modelo 1986Traduzido automaticamente · original: inglêsVer detalhes →
Capri II · 1979–1986
RecallLeveMotorNA

Emissões

Certos Mustang 1987-89 de 2,3 litros, Mustang e Capri 1986 de 5,0 litros HO, e Mustang e Mark VII 1987-89 de 5,0 litros HO. Esses veículos podem não estar em conformidade com a C.M.V.S.S. 1103 - emissões de gases de escapamento. O substrato do catalisador pode chocalhar e se desintegrar durante o uso normal, fazendo com que as emissões de gases de escapamento excedam o limite estabelecido. Correção: o catalisador será substituído quando necessário.

Transport Canada20 de ago. de 19921992097Anos-modelo 1986Traduzido automaticamente · original: inglêsVer detalhes →

Fontes: NHTSA (Estados Unidos, domínio público), Transport Canada (Open Government Licence – Canada), DVSA (Reino Unido, Open Government Licence v3.0), RappelConso e Safety Gate da UE (França, Licence Ouverte 2.0), MLIT (Japão, Licença de Dados Públicos 1.0) e MOLIT (Coreia do Sul, car.go.kr).