A ECU que controla as funções do airbag e do tensor do cinto de segurança pode ser afetada pela entrada de humidade. Se ocorrer corrosão posteriormente no circuito impresso, isso pode resultar em mau funcionamento destes sistemas e, em casos extremos, causar a utilização inadvertida do airbag ou dos tensores do cinto de segurança.
DVSA · Reino Unido5 de jul. de 1999R/1999/054Anos-modelo 1992–1994Traduzido automaticamente · original: inglêsVer detalhes →
As a result of water penetration corrosion may be present on the brake pressure warning switch connection. This could result in the loss of braking system pressure and may also negate the ABS function.
DVSA · Reino Unido26 de jun. de 1995R/1995/045Anos-modelo 1991–1993Exibido no inglês original · tradução pendenteVer detalhes →
A slightly downward low energy impact could result in breakage of the engine oil cooler hose and/or housing. Leaking oil from the oil cooler can be ignited by a hot exhaust manifold or turbocharger resulting in an engine compartment fire. Correction: A protective cover will be installed over the oil cooler.
Transport Canada29 de jul. de 19941994125Anos-modelo 1992–1994Exibido no inglês original · tradução pendenteVer detalhes →
During low energy frontal impact collisions, the front crossmember can contact the metal tubing portion of the cooler hose assembly; and/or the hose assembly can break and leak oil onto the hot exhaust manifold or the turbocharger.
NHTSA · Estados Unidos8 de jul. de 199494V126000Anos-modelo 1992–1994Exibido no inglês original · tradução pendenteVer detalhes →
Cracks can develop in the two (2) rubber hoses that connect the fuel tank with the plastic pipes which go to the fuel filler housing. This could result in fuel leakage and, in the presence of an ignition source, a fire could occur. Correction: Dealers will replace the hoses and replace the clamps with new style clamps that have a protective inner layer.
Transport Canada27 de abr. de 19941994082Anos-modelo 1992–1993Exibido no inglês original · tradução pendenteVer detalhes →
Abrasion on the printed circuit card in the combination neutral safety/backup lamp switch operated by the automatic transmission gear selector may cause residue to collect in electrical area on the circuit card.
NHTSA · Estados Unidos2 de nov. de 199090V001000Anos-modelo 1986–1990Exibido no inglês original · tradução pendenteVer detalhes →
Note: Vehicles with automatic transmission residue on the circuit card may cause an electrical short in the back-up lamp circuit and eventual overheating of the combination safety/back-up lamp switch assembly. If this should occur, smoke or possibly a fire might develop from the center console area in the passenger compartment. Correction: An electrical circuit, including a relay, will be added to the back-up lamp circuit. This will reduce the maximum electric current that can flow through the combination switch in the gear selector.
Transport Canada6 de mar. de 19901990042Anos-modelo 1987–1990Exibido no inglês original · tradução pendenteVer detalhes →
On vehicles with automatic transmission and anti-lock braking system (abs) the throttle/kick-down cable and gear selector wire may come loose and rub against any of the three steel brake lines connected to the valve block of the abs system hydraulic brake unit. Chafing damage could result in loss of brake fluid and partial loss of braking force with a subsequent increase in stopping distance. Correction: Routing of the throttle/kick-down cable will be changed and a new attachment bracket will be installed. Brake lines and valve block will be inspected for chafing and chafed brake lines will be replaced.
Transport Canada24 de nov. de 19891989159Anos-modelo 1988–1989Exibido no inglês original · tradução pendenteVer detalhes →
A condition may exist whereby the wiring harness may chafe against the windshield wiper motor bracket. This could result in a short circuit and a possible vehicle fire. Correction: Rubber protective strips will be installed on the edges of the windshield wiper motor bracket to prevent this condition.
Transport Canada27 de out. de 19861986121Anos-modelo 1986Exibido no inglês original · tradução pendenteVer detalhes →
The wiring harness may chafe against the windshield wiper motor bracket. Consequence of defect: If a short circuit develops, it could result in a fire.
NHTSA · Estados Unidos27 de out. de 198686V143000Anos-modelo 1986Exibido no inglês original · tradução pendenteVer detalhes →
Em certos veículos, a humidade pode entrar no módulo eletrónico de controlo do airbag e causar corrosão em partes das placas de circuito das impressoras ECM. Esta condição pode, em casos extremos, criar ligações abertas nos circuitos que controlam a abertura do airbag, com a possibilidade de airbag e/ou ativação inadvertida do pré-tensionador. Correção: Os concessionários irão inspecionar o módulo de controlo eletrónico e instalar uma tampa protetora sobre o módulo para evitar a entrada de humidade.
Transport Canada8 de jun. de 19991999114Anos-modelo 1992–1994Traduzido automaticamente · original: inglêsVer detalhes →
Descrição do veículo: Veículos de passageiros. A humidade pode entrar no módulo de controlo eletrónico insuflável (ECM) do airbag e causar corrosão em partes das placas de circuito da impressora ECM.
NHTSA · Estados Unidos6 de mai. de 199999V109000Anos-modelo 1992–1994Traduzido automaticamente · original: inglêsVer detalhes →
These vehicles do not comply with c.M.V.S.S. 213 - child restraint systems. The child safety seat mounting on the parcel shelf does not comply to the requirements of the standard due to incorrect spot welds. In the event of an accident, the child seat could come loose, causing injuries to the child. Correction: Parcel shelf and support plate will be replaced on affected vehicles.
Transport Canada20 de out. de 19951995187Anos-modelo 1995Exibido no inglês original · tradução pendenteVer detalhes →
ON VEHICLES EQUIPPED WITH "MkII" ABS BRAKING SYSTEM, MOISTURE MAY FOLLOW THE WIRING TO THE PRESSURE WARNING SWITCH ON THE ABS UNIT WHICH CAN CAUSE CORROSION TO BUILD UP ON THE CONNECTION TERMINAL. A MALFUNCTION COULD CAUSE A LOSS OF POWER ASSISTANCE. CORRECTION: IF THE SWITCH CONNECTION PINS ARE CORRODED, THE SWITCH WILL BE REPLACED. ON ALL AFFECTED VEHICLES, THE SWITCH CONNECTION WILL BE SPRAYED WITH A COATING AND SHRINK SLEEVE WILL BE APPLIED TO SEAL THE CONNECTION FROM WATER.
Transport Canada22 de jun. de 19951995114Anos-modelo 1992–1994Exibido no inglês original · tradução pendenteVer detalhes →
Fontes: NHTSA (Estados Unidos, domínio público), Transport Canada (Open Government Licence – Canada), DVSA (Reino Unido, Open Government Licence v3.0), RappelConso e Safety Gate da UE (França, Licence Ouverte 2.0), MLIT (Japão, Licença de Dados Públicos 1.0) e MOLIT (Coreia do Sul, car.go.kr).