燃油系统
在部分318I、318IC、318IS、325IC、325IS、325IX、525I、535I、735I和735IL车型上,燃油供油软管可能因发动机舱温度而变硬并逐渐"定型"。若发生这种"定型",软管与接头之间可能出现渗漏,因为卡箍无法提供足够的密封力来补偿软管的硬化。在有点火源的情况下,燃油渗漏可能导致发动机舱起火。 纠正措施:燃油供油软管及相关卡箍将更换为新设计的产品。
在部分318I、318IC、318IS、325IC、325IS、325IX、525I、535I、735I和735IL车型上,燃油供油软管可能因发动机舱温度而变硬并逐渐"定型"。若发生这种"定型",软管与接头之间可能出现渗漏,因为卡箍无法提供足够的密封力来补偿软管的硬化。在有点火源的情况下,燃油渗漏可能导致发动机舱起火。 纠正措施:燃油供油软管及相关卡箍将更换为新设计的产品。
供油软管会随时间变硬并发生"定型"(永久变形),从而导致燃油在软管与发动机接头的连接处渗漏。用于将软管固定在接头上的卡箍无法补偿供油软管的硬化。
冷却系统组件的故障或失效会导致冷却液温度显著升高,系统压力随之升高。
过高的冷却系统温度增加在最坏的情况下可能导致暖风散热器(加热器芯)爆裂。
On certain 318I, 325I and M3 vehicles, elevated pressure in the cooling system due to overheating could result in cracking of the heater core end piece. Should this happen, coolant could be expelled onto the lower right leg of the driver, possibly resulting in personal injury and/or fogging of the interior surfaces of the windows causing reduced driver vision. Correction: A thermistatic bypass valve will be installed to control coolant temperature in the heater core. Also, a new design radiator cap will be installed to control pressure and provide greater overflow.
On certain 325IX vehicles, the oil dipstick tube attaching bracket may have been bent during the manufacturing process or during scheduled maintenance. This could possibly cause the dipstick to interfere with the throttle bellcrank lever's range of motion and prevent the lever from returning to the idle position after release of the accelerator pedal. Correction: Throttle bellcrank lever will be modified to provide sufficient clearance. Note: Vehicles with manual transmission only.
The oil dipstick tube attaching bracket may have been bent during production or scheduled maintenance, reducing the clearance between the dipstick ring and the throttle bellcrank lever.
The idle control valve which controls idle speed by varying the amount of intake air that bypasses the throttle plate is subject to backfire into the intake manifold. Such backfire can damage the valve and cause the idle valve plate to remain open. Consequence of defect: This will result in abnormally high idle speed.
On certain 320I vehicles, crack in the exhaust system between the exhaust pipe and the catalytic converter could result in exhaust emissions which do not comply with CMVSS 1103.
On certain 318I vehicles, improper starting procedure could cause a backfire into the intake manifold and damage internal components of the idle control valve. This could result in abnormally high idle speed and if warnings of increased engine noise level and tachometer reading are not heeded, a vehicle crash could occur.
来源:NHTSA(美国,公有领域)、加拿大交通部(加拿大开放政府许可)、DVSA(英国,开放政府许可 v3.0)、RappelConso 与欧盟 Safety Gate(法国,开放许可 2.0)、日本国土交通省(公共数据许可1.0)、韩国国土交通部(car.go.kr)。