技术服务通报(TSB)是制造商就已知问题发给经销商的维修说明。它们不是安全召回,但常常能证实某个缺陷。
通报中等电气NA
This Preliminary Information communication provides information to the technician about vehicles that have an intermittent no crank, no start, or start stall concern with the security light coming on. Technician may find Diagnostic Trouble Codes B3055, B3060, and/or B3935. Technician should not replace any parts for this concern. If unable to duplicate the concern ask if the customer uses any Radio Frequency Identification Devices when the concern is present. Dealer should also direct their customers to the appropriate section in the Owner manuals that references that the device complies.
通报中等电气NA
This Preliminary Information communication provides information to the technician about vehicles that have an intermittent no crank, no start, or start stall concern with the security light coming on. Technician may find Diagnostic Trouble Codes B3055, B3060, and/or B3935. Technician should not replace any parts for this concern. If unable to duplicate the concern ask if the customer uses any Radio Frequency Identification Devices when the concern is present. Dealer should also direct their customers to the appropriate section in the Owner manuals that references that the device complies.
通报中等电气NA
This Preliminary Information communication provides information to the technician about vehicles that have an intermittent no crank, no start, or start stall concern with the security light coming on. Technician may find Diagnostic Trouble Codes B3055, B3060, and/or B3935. Technician should not replace any parts for this concern. If unable to duplicate the concern ask if the customer uses any Radio Frequency Identification Devices when the concern is present. Dealer should also direct their customers to the appropriate section in the Owner manuals that references that the device complies.
通报中等发动机NA
This informational bulletin provides technicians with diagnostic tips for preventing oil leaks after changing oil and filter.
通报中等发动机NA
This informational bulletin provides technicians with diagnostic tips for preventing oil leaks after changing oil and filter.
通报中等发动机NA
This Preliminary Information communication provides information to the technician about vehicles that after installing a reman High Value V6 engine it has rough running, idle surge, misfire on one or both banks of the engine concern. Technician may find Diagnostic Trouble Codes P0300, P0011 and / or P0016. Technician will need to check the actual engine oil pressure. If oil pressure is within the specifications above, perform all testing listed in PIP4345A including a visual inspection of the camshaft position actuator filter and repair or replace as necessary. Technician will need to contact General Motors Technical Assistance Center for further assistance if the concern is still present.
通报中等电气NA
This Preliminary Information communication provides information to the technician that after installing a re-manufactured High Feature V6 engine the vehicle may rough running, idle surge, Check Engine Lamp or Camshaft Position sensor actuator codes. Technician will need to record the actual engine oil pressure at idle and engine compression readings. Technician will need to perform all testing listed in PIP4345A, if oil pressure and compression readings are within specifications. Technician will need to contact General Motors Technical Assistance Center for further assistance if the concern is not isolated.
通报中等发动机NA
Oil leak at crankshaft/balancer seal. *tt
通报中等发动机NA
Rear main oil seal leak. *tt
通报中等变速箱NA
No movement and/or transmission oil leak from right inner tripot - right driveshaft not seated. *tt
通报中等悬架NA
A stall and/or no crank, no start condition after the wipers are used. The service engine soon light may or may not be illuminated and the customer may report other problems with the cruise control system. A tech 2 diagnostic probe will find numerous dtcs which could include p0608 cruise control, c0460, c0461 steering wheel sensor codes, and possibly a no communication issue with the pcm. Engineering has determined the wiper motor crank arm is contacting the ubec wiring harness and cutting the wires. *tt
通报中等其他NA
Revised camshaft position actuator fastener installation procedure. *tt
通报中等电气NA
Stall, no crank, no start after using the wipers. *tt
通报中等内饰NA
Supplement to sit-n-lift seat installation instructions. *tt
通报中等制动NA
Rear disc brake drag or continuing to hold. *tt
通报中等其他NA
Crank, no start condition with no spark. *tt
通报轻微其他NA
新车监控项目部分(IVH)
通报轻微悬架NA
此前期信息涉及后桥可能出现的低沉嗡嗡声,工程部门正在审查该问题。
通报轻微发动机NA
This bulletin provides information on the TOP TIER Detergent Gasoline Licensed Brands and the TOP TIER Diesel Fuel Licensed Brands that are recommended for use in all GM vehicles and the TOP TIER FUELS website URL.
通报轻微其他NA
This warranty administration bulletin provides policy information to cover GMs policy on performing GM covered vehicle services and maintenance on vehicles originating/sold in Canada.
通报轻微其他NA
This service bulletin provides information on proper use of floor mats.
通报轻微发动机NA
This service bulletin provides information on the cold start control system in DI engines to reduce cold start emissions and improve fuel economy.
通报轻微其他NA
Bluetooth Stays Connected After RAP Is Canceled.
通报轻微其他NA
Bluetooth Stays Connected After RAP Is Canceled.
通报轻微电气NA
编程与激活更换的安吉星(OnStar)模块。
来源:NHTSA(美国,公有领域)、加拿大交通部(加拿大开放政府许可)、DVSA(英国,开放政府许可 v3.0)、RappelConso 与欧盟 Safety Gate(法国,开放许可 2.0)、日本国土交通省(公共数据许可1.0)、韩国国土交通部(car.go.kr)。