通报
TT: Injector Maintenance Required message shows at approximately 6000 miles.
🔔 注册免费账户,接收 Lexus GS (所有代) 的邮件提醒
技术服务通报(TSB)是制造商就已知问题发给经销商的维修说明。它们不是安全召回,但常常能证实某个缺陷。
TT: Injector Maintenance Required message shows at approximately 6000 miles.
TT: Injector Maintenance Required message shows at approximately 6000 miles.
Tt: Injector maintenance required message shows at approximately 6000 miles.
DL: On December 20, 2022, a settlement of claims for certain low pressure fuel pumps was approved by the federal court. The settlement includes Lexus?s agreement to provide a Customer Support Program for certain 2013-2020 model year (MY) vehicles originally equipped with low pressure fuel pumps repaired under Safety Recall 20LA01 or Special Service Campaign 21LC01. The purpose of this Customer Support Program letter is to help clarify how to administer this coverage in accordance with the settlement.
这是为了通知自2023年3月1日起,正品雷克萨斯机油和长效防冻液的各项价格调整。这些产品通过雷克萨斯全面保养服务(LCMC)网站订购。
Fuel Delivery Pipe Replacement
Adhesive & Sealant Cross Reference Information/ Engine Hybrid System Wait, I should clarify the task: the system prompt asks me to translate the user's text into Chinese. The text here is a short heading. Translating it: 胶粘剂与密封胶交叉参考信息 / 发动机混合动力系统
Adhesive & Sealant Cross Reference Information/ Engine Hybrid System Wait, I need to be precise about the task: the instruction says to translate the user's text from English to Chinese. The text is a heading-like string. Translation: 粘合剂与密封剂交叉参考信息/发动机混合动力系统
Engine Misfire Duplication Procedure - MIL on DTC p030 and /or Intermittently Runs Rough
Engine Misfire Duplication Procedure - MIL on DTC p030 and /or Intermittently Runs Rough
Fuel Injection Active Test Remedy - 2GR-FKS and 8AR-fts
TT: The current engine active test Control the Injection Mode? is not operating as desired when controlling the direct injectors manually on 2GR-FKS engines. When direct injection is started and then stopped using the active test, current ECU logic does not turn off the direct injectors and can cause DTCs P017200, P017500 and P0160300. To avoid this condition, technicians should raise engine RPM when changing back and forth between the Direct Injection and Port Injection active tests. Use the recommended procedure below to avoid this concern while testing injection mode of FKS equipped vehicles. NOTE: If the active test is used multiple times without using this procedure to raise engine RPM, it may be necessary to reset learning values for fuel trim and Air to Fuel ratio before returning vehicle to customer.
TT: Some IS250 and GS300 vehicles may exhibit one or more of the following conditions: ? MIL ?ON? DTC P0300, P0301, P0302, P0303, P0304, P0305, and/or P0306. ? Intermittently runs rough after coming to a stop with the engine at operating temperature. ? Intermittently runs rough with engine misfires present after a cold soak startup. NOTE: The recommendations in this document apply to an intermittent misfire concern. If a vehicle exhibits a steady misfire, the root cause is not related to the referenced service bulletins and the repair manual should be referenced for diagnosis.
TT: TMS has discovered the current engine active test ?Control the Injection Mode? is not operating as desired when controlling the direct injectors manually on 2GR-FKS or 8AR-FTS engines. When direct injection is started and then stopped using the active test, current ECU logic does not turn off the direct injectors and can cause DTCs P017200, P017500 and P0160300. In order to avoid this condition, technicians should raise engine RPM when changing from Direct Injection active test to Port Injection active test. Use the recommended procedure below to avoid this concern while testing injection mode of 2GR-FKS or 8AR-FTS equipped vehicles. NOTE: If the active test is used multiple times without using this procedure to raise engine RPM, it may be necessary to reset learning values for fuel trim and Air to Fuel ratio before returning vehicle to customer.
TSB: Some 2013 ? 2016 model year FR-S vehicles may exhibit a high pitch chirp or squeak noise from the high pressure Fuel Pump Assembly when the engine is fully warmed-up and idling. Follow the procedure in this bulletin to address this condition.
Some IS250 and GS300 vehicles may exhibit one or more of the following conditions: MIL "ON" DTC P0300, P0301, P0302, P0303, P0304, P0305, and or P0306. Intermittently runs rough after coming to a stop with the engine at operating temperature. intermittently runs rough with engine misfires present after a cold soak startup.
Some IS250 and GS300 vehicles may exhibit one or more of the following conditions: MIL ?ON? DTC P0300, P0301, P0302, P0303, P0304, P0305, and/or P0306 Intermittently runs rough after coming to a stop with the engine at operating temperature Intermittently runs rough with engine misfires present after a cold soak startup
Tech Tip: Some IS250 and GS300 vehicles may exhibit one or more of the following conditions: MIL "ON" DTC P0300, P0301, P0302, P0303, P0304, P0305, and/or P0306. Intermittently runs rough after coming to a stop with the engine at operating temperature. Intermittently runs rough with engine misfires present after a cold soak startup. NOTE: The recommendations in this document apply to an intermittent misfire concern. If a vehicle exhibits a steady misfire, the root cause is not related to the referenced service bulletins and the repair manual should be referenced for diagnosis.
"tt: Tms has discovered the current engine active test control the injection mode is not operating as desired when controlling the direct injectors manually on 2gr-fks or 8ar-fts engines. When direct injection is started and then stopped using the active test, current ecu logic does not turn off the direct injectors and can cause dtcs p017200, p017500 and p0160300. In order to avoid this condition, technicians should raise engine rpm when changing from direct injection active test to port injection active test. Use the recommended procedure below to avoid this concern while testing injection mode of 2gr-fks or 8ar-fts equipped vehicles. Note: If the active test is used multiple times without using this procedure to raise engine rpm, it may be necessary to reset learning values for fuel trim and air to fuel ratio before returning vehicle to customer."
"tt: Some is250 and gs300 vehicles may exhibit one or more of the following conditions: Mil on dtc p0300, p0301, p0302, p0303, p0304, p0305, and/or p0306. Intermittently runs rough after coming to a stop with the engine at operating temperature. Intermittently runs rough with engine misfires present after a cold soak startup. Note: The recommendations in this document apply to an intermittent misfire concern. If a vehicle exhibits a steady misfire, the root cause is not related to the referenced service bulletins and the repair manual should be referenced for diagnosis."
Lexus: Is250-gs300: Engine runs rough when coming to a stop, after cold soak start up engine misfires. *lj
Lexus: Vehicle engine runs rough after coming to a stop or misfires. *pe
Lexus: Mil on dtc p030# and/or intermittently runs rough. Engine/hybrid. Engine control. Some vehicles may exhibit one or more of the following conditions. Mil on dtc p0300, p0301, p0302, p0303, p0304, p0305 and/or p0306. Runs rough after stopping with engine at operating temperature; runs rough with engine misfires after cold soak startup. *pe
Ilsac gf-4 engine oil standard. '06 lexus. *tt excluding hybrid vehicles. *tt recommendation. *tt
Repair manual correction for the engine (3uz-fe). 00245-rm112-6u1. *tt
来源:NHTSA(美国,公有领域)、加拿大交通部(加拿大开放政府许可)、DVSA(英国,开放政府许可 v3.0)、RappelConso 与欧盟 Safety Gate(法国,开放许可 2.0)、日本国土交通省(公共数据许可1.0)、韩国国土交通部(car.go.kr)。