免费阅读 · 免费账户即可贡献Anticars(2000)的继任者

Mazda 2

2002– · 3 各代车型 · 已记录13项缺陷 · 7个市场
各代车型

技术服务通报(TSB)是制造商就已知问题发给经销商的维修说明。它们不是安全召回,但常常能证实某个缺陷。

严重程度全部中等轻微
车型年份
市场全部NA
2 III · 2014–
通报中等电气NA

通报

Some customers may experience a SBS/SCBS, LAS/LDWS and/or HBC warning light on. A system error message may also be found in the center display. DTC U3000:04-0A (Forward sensing camera (FSC) internal malfunction). DTC U3000:04-0A (Forward sensing camera (FSC) internal malfunction) is stored in the FSC module and cannot be erased. This concern may be caused by a hardware failure of an internal device of the FSC, which results in a malfunction detection. To eliminate this concern, the production process of the FSC has been modified.

NHTSA · 制造商通报10199641车型年份 2021以原文(英语)显示 · 翻译待完成查看详情 →
2 III · 2014–
通报中等电气NA

通报

If you experience issues with the current version of ID's such as missing tools or modules not showing after completing a network test, be advised that we are aware of these issues and are working to resolve them. As a counter measure, it is advised that you un-install ids and re-install version 103.00 and "do not update" until further notice.

NHTSA · 制造商通报10185813车型年份 2017以原文(英语)显示 · 翻译待完成查看详情 →
2 III · 2014–
通报轻微电气NA

通报

1. 部分客户可能会投诉以下任一问题: 2. 在 MyMazda App 联网车辆注册过程中,信息娱乐中心显示屏未提供授权码(OTP)。 3. 远程功能失效。

NHTSA · 制造商通报11039110车型年份 2021自动翻译 · 原文:英语查看详情 →
2 III · 2014–
通报轻微电气NA

通报

某些车辆可能会出现发动机检查灯点亮,并存储故障码 P0300:00(检测到随机失火)。这可能是由于PCM控制逻辑不当,导致失火被误判所致。为消除此问题,PCM控制逻辑已作修改。

NHTSA · 制造商通报11012337车型年份 2021自动翻译 · 原文:英语查看详情 →
2 III · 2014–
通报轻微电气NA

通报

顾客可能会注意到,行驶过程中充电指示灯亮起。经检查,存储器中记录有故障码 DTC P2502:00 PCM(发电机产生的电压故障)。这可能是由电路板与搭铁之间的电阻所引起的。当大电流通过时,搭铁端子的接触位置可能不够牢固。为消除此问题,已对 DC-DC 转换器控制软件进行了修改。此外,生产工艺也已修订,提高了搭铁端子与电路板的紧固扭矩。

NHTSA · 制造商通报11008418车型年份 2021自动翻译 · 原文:英语查看详情 →
2 III · 2014–
通报轻微电气NA

通报

Some customers may experience a check engine light illumination at idle while stopped with DTC P0300:00 stored, resulting in rough idle conditions. P0300:00: Random misfire detected This concern is caused by improper engine control in the idle range. To eliminate the concern, the PCM control software has been modified.

NHTSA · 制造商通报11008417车型年份 2021以原文(英语)显示 · 翻译待完成查看详情 →
2 III · 2014–
通报轻微电气NA

通报

BSM Radar aiming cannot be performed after rightside BSM control module rekkplacement

NHTSA · 制造商通报10213434车型年份 2016以原文(英语)显示 · 翻译待完成查看详情 →
2 III · 2014–
通报轻微电气NA

通报

Some customers may experience the CHECK ENGINE light ON with DTC P0089:00 (Spill valve control solenoid valve control circuit range/performance problem) stored. This is caused by improper control software of the PCM detecting a false error, even with normal fuel pressure operation. To correct this issue, the control software of the PCM has been modified.

NHTSA · 制造商通报10190951车型年份 2021以原文(英语)显示 · 翻译待完成查看详情 →
2 III · 2014–
通报轻微电气NA

通报

Some vehicles may experience a fuzzy appearance (tiny cracks) around the edge of the Active Driving Display. Replace the Active Driving Display.

NHTSA · 制造商通报10185954车型年份 2016以原文(英语)显示 · 翻译待完成查看详情 →
2 III · 2014–
通报轻微电气NA

通报

Some vehicles may experience the check engine light on with DTCs P2096:00, P2097:00 and/or P0524:00 that cannot be cleared by itself, and the check engine light stays on even if the detection condition has gone. P2096:00 - Air fuel too lean P2097:00 - Air fuel too rich P0524:00 - Engine oil pressure too low. This concern may be caused by improper PCM control logic. The PCM software has been modified to eliminate this concern.

NHTSA · 制造商通报10180595车型年份 2019以原文(英语)显示 · 翻译待完成查看详情 →
2 III · 2014–
通报轻微电气NA

通报

Some vehicles may experience a fuzzy appearance (tiny cracks) around the edge of the Active Driving Display.

NHTSA · 制造商通报10188483车型年份 2016以原文(英语)显示 · 翻译待完成查看详情 →
2 III · 2014–
通报轻微电气NA

通报

New IDs software version 102.00 and Update 102.01 is now available on MS3 IDs update 102.00 and 102.01 is now available on MS3 under the "IDs/Infotainment" tab.

NHTSA · 制造商通报10186918车型年份 2017以原文(英语)显示 · 翻译待完成查看详情 →
2 III · 2014–
通报轻微电气NA

通报

Active driving display opens/closes improperly. Some vehicles may exhibit the active driving display opening/closing improperly as described below: * It does not open or close when the ignition is turned ON or OFF . * The display operation does not fully open/close. * It closes and then opens by itself while the vehicle is moving. This concern may be caused by voltage fluctuation to the act ive driving display which activates pinching detection. Customer having this concern should have their vehicle repaired using the following repair procedure.

NHTSA · 制造商通报10186257车型年份 2016以原文(英语)显示 · 翻译待完成查看详情 →
2 III · 2014–
通报轻微电气NA

通报

Some customers may experience the active driving display (auto flip-up type) does not flip up and no DTC is stored. Due to improper assembly, a deformed bracket may cause a loose mesh between internal gears. To correct this issue, the active driving display has been changed.

NHTSA · 制造商通报10144332车型年份 2018以原文(英语)显示 · 翻译待完成查看详情 →
2 III · 2014–
通报轻微电气NA

通报

Some vehicles may experience a fuzzy appearance (tiny cracks) around the edge of the Active Driving Display. Replace the Active Driving Display.

NHTSA · 制造商通报10125470车型年份 2016以原文(英语)显示 · 翻译待完成查看详情 →
2 III · 2014–
通报轻微电气NA

通报

If the right-side bsm control module requires replacement for any repair, also replace the left side bsm control module to complete the radar aiming procedure (it is ok to replace the left bsm alone). Reason if the right-side bsm control module is replaced alone, automatic configuration is not performed due to a program error in the module. Because of this, the required bsm radar aiming cannot be performed. Automatic configuration as well as bsm radar aiming can be performed, if the left-side bsm control module is replaced alone or together with the right-side bsm control module.

NHTSA · 制造商通报10105642车型年份 2016以原文(英语)显示 · 翻译待完成查看详情 →
2 III · 2014–
通报轻微电气NA

通报

If the right-side bsm control module requires replacement for any repair, also replace the left side bsm control module to complete the radar aiming procedure (it is ok to replace the left bsm alone). Reason if the right-side bsm control module is replaced alone, automatic configuration is not performed due to a program error in the module. Because of this, the required bsm radar aiming cannot be performed. Automatic configuration as well as bsm radar aiming can be performed, if the left-side bsm control module is replaced alone or together with the right-side bsm control module.

NHTSA · 制造商通报10101468车型年份 2016以原文(英语)显示 · 翻译待完成查看详情 →
2 III · 2014–
通报轻微电气NA

通报

Some vehicles may experience a fuzzy appearance (tiny cracks) around the edge of the active driving display. Replace the active driving display.

NHTSA · 制造商通报10101464车型年份 2016以原文(英语)显示 · 翻译待完成查看详情 →
2 III · 2014–
通报轻微电气NA

通报

If the active driving display (ad-disp) unit requires removal, use caution when disconnecting/connecting the wiring harness. If the harness is not connected properly, the ad-disp may not operate.

NHTSA · 制造商通报10091601车型年份 2016以原文(英语)显示 · 翻译待完成查看详情 →
2 III · 2014–
通报轻微电气NA

通报

Some vehicles may experience a fuzzy appearance (tiny cracks) around the edge of the active driving display. Replace the active driving display.

NHTSA · 制造商通报10090902车型年份 2016以原文(英语)显示 · 翻译待完成查看详情 →
2 III · 2014–
通报轻微电气NA

通报

If the active driving display (ad-disp) unit requires removal, use caution when disconnecting/connecting the wiring harness. If the harness is not connected properly, the ad-disp may not operate.

NHTSA · 制造商通报10090667车型年份 2016以原文(英语)显示 · 翻译待完成查看详情 →
2 III · 2014–
通报轻微电气NA

通报

Bsm radar aiming cannot be performed after right-side bsm control module replacement. If right-dide bsm control module requres replacement for any repair, also replace left side bsm control module to compelte the radar aiming procedure (it's ok to replace the left bsm alone). If the right-side bsm control module is replaced alone, "automatic configuration" is not performed due to program error in module. Because of this, the required "bsm radar aiming" cannot be performed. "automatic configuration" as well as "bsm radar aiming" can be performed if left-side bsm control module is replaced alone or together with right-side bsm control module.

NHTSA · 制造商通报10076685车型年份 2016以原文(英语)显示 · 翻译待完成查看详情 →
2 II · 2007–2014
通报轻微电气NA

通报

Mazda: There is possible excessive condensation or water inside the headlamp unit on many mazda models. *rm

NHTSA · 制造商通报10037949车型年份 2011以原文(英语)显示 · 翻译待完成查看详情 →
2 II · 2007–2014
通报轻微电气NA

通报

Mazda: There is condensation and fog in the front and rear combination lights. *rm

NHTSA · 制造商通报10037655车型年份 2011以原文(英语)显示 · 翻译待完成查看详情 →

来源:NHTSA(美国,公有领域)、加拿大交通部(加拿大开放政府许可)、DVSA(英国,开放政府许可 v3.0)、RappelConso 与欧盟 Safety Gate(法国,开放许可 2.0)、日本国土交通省(公共数据许可1.0)、韩国国土交通部(car.go.kr)。