通报
Tire pressure monitoring system (TPMS) warning Light IlluminationMisure prevention logic
🔔 注册免费账户,接收 Mazda 2 (所有代) 的邮件提醒
技术服务通报(TSB)是制造商就已知问题发给经销商的维修说明。它们不是安全召回,但常常能证实某个缺陷。
Tire pressure monitoring system (TPMS) warning Light IlluminationMisure prevention logic
Some customers may experience a SBS/SCBS, LAS/LDWS and/or HBC warning light on. A system error message may also be found in the center display. DTC U3000:04-0A (Forward sensing camera (FSC) internal malfunction). DTC U3000:04-0A (Forward sensing camera (FSC) internal malfunction) is stored in the FSC module and cannot be erased. This concern may be caused by a hardware failure of an internal device of the FSC, which results in a malfunction detection. To eliminate this concern, the production process of the FSC has been modified.
某些车辆在经历寒冷潮湿的天气停放后,制动时前刹车可能会发出尖叫声。由于寒冷条件下刹车片的摩擦阻力增大,刹车片容易产生振动,从而导致尖叫声。
A/C blows warm air. Some customers may complain about warm air from the climate cointrol vents. This may be caused by improper brazing (A) of the evaporator (B) causing a refrigerant leak fr om the joint between the tubes and the header (D)
If you experience issues with the current version of ID's such as missing tools or modules not showing after completing a network test, be advised that we are aware of these issues and are working to resolve them. As a counter measure, it is advised that you un-install ids and re-install version 103.00 and "do not update" until further notice.
Some vehicles may exhibit an unusual noise from around the drivers foot area when repeatedly turning the steering wheel to the left or right. A vibration is felt at the steering wheel when the noise occurs. This concern may be caused by a lack of grease application to the splines of the intermediate shaft at the production line. The grease application process has been improved.
1. 部分客户可能会投诉以下任一问题: 2. 在 MyMazda App 联网车辆注册过程中,信息娱乐中心显示屏未提供授权码(OTP)。 3. 远程功能失效。
某些车辆可能会出现发动机检查灯点亮,并存储故障码 P0300:00(检测到随机失火)。这可能是由于PCM控制逻辑不当,导致失火被误判所致。为消除此问题,PCM控制逻辑已作修改。
顾客可能会注意到,行驶过程中充电指示灯亮起。经检查,存储器中记录有故障码 DTC P2502:00 PCM(发电机产生的电压故障)。这可能是由电路板与搭铁之间的电阻所引起的。当大电流通过时,搭铁端子的接触位置可能不够牢固。为消除此问题,已对 DC-DC 转换器控制软件进行了修改。此外,生产工艺也已修订,提高了搭铁端子与电路板的紧固扭矩。
Some customers may experience a check engine light illumination at idle while stopped with DTC P0300:00 stored, resulting in rough idle conditions. P0300:00: Random misfire detected This concern is caused by improper engine control in the idle range. To eliminate the concern, the PCM control software has been modified.
Front/Rear stabilizer noise prevention
MultiModel(配备 skyactivdrive)ATF 颜色变化 新车的自动变速箱油(ATF)颜色为蓝色。随着车辆里程增加,ATF 颜色会发生变化。该颜色变化不影响车辆性能。
BSM Radar aiming cannot be performed after rightside BSM control module rekkplacement
Mazda Technical Service Bulletins March 2016 Some vehicles may exhibit the inner cloth (A) falling down at the rear end causing a poor appearance and obstructing the view of the back window.
Maintenance.
MAZDA 互联服务 - 常见问题 (FAQ): 索引:常规问题、设置与入门、注册/登记、WI-FI 常规信息、WI-FI 操作指南、WI-FI 试用期、与应用程序交互、服务问题、故障排除、信号强度检查、经销商流程、远程启动无法工作的条件、远程启动功能将关闭发动机的条件、教学视频、资源
MAZDA CONNECTED SERVICES - 常见问题 (FAQ): 索引:常规问题、设置与入门、注册/登记、WI-FI 常规信息、WI-FI 操作指南、WI-FI 试用期、与应用程序交互、服务问题、故障排除、信号强度检查、经销商流程、远程发动机启动无法工作的条件、远程发动机启动功能会关闭发动机的条件、教育视频、资源
Some customers may experience the CHECK ENGINE light ON with DTC P0089:00 (Spill valve control solenoid valve control circuit range/performance problem) stored. This is caused by improper control software of the PCM detecting a false error, even with normal fuel pressure operation. To correct this issue, the control software of the PCM has been modified.
Some vehicles may experience a fuzzy appearance (tiny cracks) around the edge of the Active Driving Display. Replace the Active Driving Display.
Beginning with the CX-5 and Mazda6 models, grip type front and rear stabilizer bushings have been incorpo-rated for noise prevention purposes. If any type of grease or lubrication is applied to the bushings, it may create noise due to bushing slippage.
Some vehicles may experience the check engine light on with DTCs P2096:00, P2097:00 and/or P0524:00 that cannot be cleared by itself, and the check engine light stays on even if the detection condition has gone. P2096:00 - Air fuel too lean P2097:00 - Air fuel too rich P0524:00 - Engine oil pressure too low. This concern may be caused by improper PCM control logic. The PCM software has been modified to eliminate this concern.
Some vehicles may experience a fuzzy appearance (tiny cracks) around the edge of the Active Driving Display.
New IDs software version 102.00 and Update 102.01 is now available on MS3 IDs update 102.00 and 102.01 is now available on MS3 under the "IDs/Infotainment" tab.
Recall 0516j updated repair procedure
Windshield washer fluid change - Factory filled windshield washer fluid has been changed to an ethanol type (yellow color) instead of athe conventional methanol type (blue color). This change is for European compliance Mazda has decided to make the change for all markets.
来源:NHTSA(美国,公有领域)、加拿大交通部(加拿大开放政府许可)、DVSA(英国,开放政府许可 v3.0)、RappelConso 与欧盟 Safety Gate(法国,开放许可 2.0)、日本国土交通省(公共数据许可1.0)、韩国国土交通部(car.go.kr)。