On affected vehicles The brackets used to secure the fuel pipes to the engine may not be tightened sufficiently. If the engine is repeatedly operated at high speed such as during circuit driving vibrations may cause the fuel pipe to resonate potentially causing the pipe to leak. The fuel leakage may increase the risk of fire.
On the subject vehicles the control logic which monitors the charging control program fails to divert the electrical power away from the capacitor when a fault is detected within the capacitor circuit. This can cause a short circuit inside the DCDC converter and could cause the engine to stall or overheating of the DCDC converter itself which could cause a fire. The fault is accompanied by the �i-ELOOP� warning light being illuminated on the instrument cluster along with the �i-Stop� warning light flashing The engine may in some circumstances stall and fail to restart. In extreme cases the DCDC converter could overheat and cause a fire
The engine control unit of the direct-current converter may be defective. This could result in a short circuit and damage of the converter, which can lead to a fire.
On certain passenger vehicles, the bolt attaching the horn assembly to the steering wheel hub may fail during a driver side front air bag deployment in extremely low ambient temperature.
The underbody panelling may be inadequately attached. As a result, it could become detached and fall onto the road, potentially damaging the tyres and posing a risk to the following traffic.
Repeated thermal expansion and shrinkage in use may cause the front fog light socket holder to become detached from the fog light case. As a consequence an exposed hot bulb may come into contact with part of the vehicle body or fittings.
The floor mat fitted in the driver's footwell may interfere with the throttle pedal and cause the throttle to stick open. This may lead to loss of control of the vehicle.