免费阅读 · 免费账户即可贡献Anticars(2000)的继任者

Mini Hatch

2001– · 5 各代车型 · 已记录48项缺陷 · 3个市场
各代车型

技术服务通报(TSB)是制造商就已知问题发给经销商的维修说明。它们不是安全召回,但常常能证实某个缺陷。

严重程度全部中等轻微
车型年份
Hatch III · 2013–2024
通报中等发动机NA

通报

Due to a manufacturing defect, the left charge air line can fail and cause an induction leak. In some casesthe Engine Malfunction warning may illuminate.

NHTSA · 制造商通报10242925车型年份 2024以原文(英语)显示 · 翻译待完成查看详情 →
Hatch III · 2013–2024
通报中等发动机NA

通报

The left charge air line can fail and cause an induction leak. In some cases the Engine Malfunctionwarning may illuminate. Note: This Service Information is similar to M11 03 23; though this one pertains to vehicles already retailed.

NHTSA · 制造商通报10242926车型年份 2024以原文(英语)显示 · 翻译待完成查看详情 →
Hatch III · 2013–2024
通报中等发动机NA

通报

B38 Engine: Mixture Faults Stored in DME and Cylinder Head Cover Leaking Engine Oil

NHTSA · 制造商通报10216761车型年份 2016以原文(英语)显示 · 翻译待完成查看详情 →
Hatch III · 2013–2024
通报中等发动机NA

通报

During the vehicle's operational life, normal engine oil seepage or sweating, in addition to accumulated road dust, dirt and grime in the engine compartment can give an appearance that there is an active engine oil leak. This is further exaggerated by residual oil that remains on the engine assembly after maintenance services are performed, for example, oil filter changes, engine oil top-offs, etc. If this visual appearance of accumulated oil on the engine assembly is misinterpreted as an active engine oil leak, then unnecessary gasket repairs/replacements will result.

NHTSA · 制造商通报10201151以原文(英语)显示 · 翻译待完成查看详情 →
Hatch III · 2013–2024
通报中等发动机NA

通报

SERVICE ACTION - MOUNTING THE OIL FILLER CAP CORRECTLY: The oil filler cap may not be mounted correctly. The cap was not installed correctly during assembly.

NHTSA · 制造商通报10182925车型年份 2021以原文(英语)显示 · 翻译待完成查看详情 →
Hatch III · 2013–2024
通报中等发动机NA

通报

SERVICE ACTION - MOUNTING THE OIL FILLER CAP CORRECTLY: The oil filler cap may not be mounted correctly. The cap was not installed correctly during assembly.

NHTSA · 制造商通报10182626车型年份 2021以原文(英语)显示 · 翻译待完成查看详情 →
Hatch II · 2006–2013
通报中等发动机NA

通报

Air Conditioning System Leak Testing. The customer complains of poor or no air conditioning cooling. After further diagnosis, the system is found to be low or empty of a refrigerant charge, but when using an electronic leak detector, no leak can be found. CAUSE: In most cases, an electronic leak detector is not sufficient for identifying small leaks in the system. Electronic leak detectors can give false alarms and can lead to an improper diagnosis of small leaks. A leak cannot be located exactly if accessibility is impaired (in the case of the expansion valve, evaporator or condenser).

NHTSA · 制造商通报10162461车型年份 2009以原文(英语)显示 · 翻译待完成查看详情 →
Hatch III · 2013–2024
通报中等发动机NA

通报

ENGINE STALLS AFTER STARTING OR WILL NOT START. The engine stalls right after starting (when stationary).

NHTSA · 制造商通报10153782车型年份 2016以原文(英语)显示 · 翻译待完成查看详情 →
Hatch III · 2013–2024
通报中等发动机NA

通报

VANOS AND VANOS CENTRAL BOLT IDENTIFICATION. INFORMATION Replacing the VANOS gear central bolts or the VANOS gear will require a component inspection when the engine assembly has been previously replaced in one of the vehicles listed above. Ordering the parts via the model, production or VIN may provide the incorrect part numbers. The procedure below will help identify which VANOS parts are installed in the replacement engine. 11 36 7 608 788 Inlet adjustment unit Oulet adjustment unit Refer to the ETK and the repair instructions for one time use fastener and component information regarding additional screws, gaskets and seals.

NHTSA · 制造商通报10151386车型年份 2016以原文(英语)显示 · 翻译待完成查看详情 →
Hatch III · 2013–2024
通报中等发动机NA

通报

SI M11 03 15 February 2016 Engine Technical Service This Service Information bulletin supersedes SI M11 03 15 dated April 2015. SUBJECT B38 Engine: Mixture Faults Stored in DME and Cylinder Head Cover Leaking Engine Oil.

NHTSA · 制造商通报10151154车型年份 2015–2016以原文(英语)显示 · 翻译待完成查看详情 →
Hatch III · 2013–2024
通报中等发动机NA

通报

SI M11 03 15 February 2016 Engine Technical Service This Service Information bulletin supersedes SI M11 03 15 dated April 2015. SUBJECT B38 Engine: Mixture Faults Stored in DME and Cylinder Head Cover Leaking Engine Oil.

NHTSA · 制造商通报10151152车型年份 2015–2016以原文(英语)显示 · 翻译待完成查看详情 →
Hatch III · 2013–2024
通报中等发动机NA

通报

SI M11 03 15 February 2016 Engine Technical Service This Service Information bulletin supersedes SI M11 03 15 dated April 2015. SUBJECT B38 Engine: Mixture Faults Stored in DME and Cylinder Head Cover Leaking Engine Oil.

NHTSA · 制造商通报10151153车型年份 2015–2016以原文(英语)显示 · 翻译待完成查看详情 →
Hatch III · 2013–2024
通报中等发动机NA

通报

SI M11 03 15 February 2016 Engine Technical Service This Service Information bulletin supersedes SI M11 03 15 dated April 2015. SUBJECT B38 Engine: Mixture Faults Stored in DME and Cylinder Head Cover Leaking Engine Oil.

NHTSA · 制造商通报10151055车型年份 2016以原文(英语)显示 · 翻译待完成查看详情 →
Hatch III · 2013–2024
通报中等发动机NA

通报

SI M11 03 15 February 2016 Engine Technical Service This Service Information bulletin supersedes SI M11 03 15 dated April 2015. SUBJECT B38 Engine: Mixture Faults Stored in DME and Cylinder Head Cover Leaking Engine Oil.

NHTSA · 制造商通报10151057车型年份 2016–2017以原文(英语)显示 · 翻译待完成查看详情 →
Hatch III · 2013–2024
通报中等发动机NA

通报

SI M11 03 15 February 2016 Engine Technical Service This Service Information bulletin supersedes SI M11 03 15 dated April 2015. SUBJECT B38 Engine: Mixture Faults Stored in DME and Cylinder Head Cover Leaking Engine Oil.

NHTSA · 制造商通报10151056车型年份 2016以原文(英语)显示 · 翻译待完成查看详情 →
Hatch II · 2006–2013
通报中等发动机NA

通报

During Engine Oil Service a Small O-Ring Is Found in the Oil Filter Housing. No customer complaint has been received. During the scheduled engine oil service, the technician notices a black rubber o-ring lying on the bottom of the engine oil filter housing. The o-ring has been dislodged from the non-return valve inside the engine oil filter housing. No subsequent engine damage occurs from the dislodged o-ring. Engine oil filter housing (1) Rubber o-ring (2) The material dimensions of the rubber o-ring are not satisfactory, allowing it to become dislodged from its installation location.

NHTSA · 制造商通报10150347车型年份 2009以原文(英语)显示 · 翻译待完成查看详情 →
Hatch III · 2013–2024
通报中等发动机NA

通报

"N14 and N18 Engine: High-pressure Pump Repair Instruction. INFORMATION The current version of ISTA/D Repair Instruction 13 51 017, ""Removing and installing or replacing high-pressure pump (N14, N18)"" has a procedure error. The current version of the Repair Instruction states to replace the highpressure supply hose on the N14 engine. The Repair Instruction also states not to replace the high-pressure supply hose on the N18 engine. The N18 portion of the Repair Instruction is incorrect. As an interim solution, follow the procedure outlined below until this portion of the Repair Instruction is corrected. https://www.minitis.net/tiscode/cgi-bin/bulletin.aspx?sie_path=/tsb/bulletins/htm_store/15601.2.M130113... 8/30/2013 Page 2 of 2 All vehicles equipped with the N18 engine and produced from 3/2012 and later. When the engine is fitted with a Bosch High-pressure Pump (1) the highpressure supply hose (2) MUST NOT be replaced when making repairs. The remaining portion of the Repair Instruction and tightning torques are correct. Refer to EPC for the applicable part numbers when making repairs. "

NHTSA · 制造商通报10150238车型年份 2013以原文(英语)显示 · 翻译待完成查看详情 →
Hatch II · 2006–2013
通报中等发动机NA

通报

The customer states that a small engine oil leak can be seen from the underside of the engine. CAUSE The internal sealing of the oil pump volume control solenoid valve is compromised, allowing engine oil to leak from the oil pump volume control solenoid.

NHTSA · 制造商通报10150087车型年份 2011以原文(英语)显示 · 翻译待完成查看详情 →
Hatch II · 2006–2013
通报中等发动机NA

通报

Engine Oil Leak. The customer states that a small engine oil leak can be seen from the underside of the engine. CAUSE The internal sealing of the oil pump volume control solenoid valve is compromised, allowing engine oil to leak from the oil pump volume control solenoid.

NHTSA · 制造商通报10149500车型年份 2009以原文(英语)显示 · 翻译待完成查看详情 →
Hatch II · 2006–2013
通报中等发动机NA

通报

Service Action: Replace the Coolant Pump. Coolant is leaking from the coolant pump. CAUSE The coolant pump may develop cracks in the plastic housing. These cracks may result in a coolant leak.

NHTSA · 制造商通报10149501车型年份 2011以原文(英语)显示 · 翻译待完成查看详情 →
Hatch II · 2006–2013
通报中等发动机NA

通报

Engine Oil Leak. The customer states that a small engine oil leak can be seen from the underside of the engine. CAUSE The internal sealing of the oil pump volume control solenoid valve is compromised, allowing engine oil to leak from the oil pump volume control solenoid.

NHTSA · 制造商通报10149323车型年份 2011以原文(英语)显示 · 翻译待完成查看详情 →
Hatch II · 2006–2013
通报中等发动机NA

通报

N16 Engine: Oil Leak from Cylinder Head Sealing Plug. An oil leak can develop at a sealing plug located in the cylinder head, just below the vacuum pump. The sealing plug was not tightened sufficiently during production.

NHTSA · 制造商通报10148441车型年份 2009–2012以原文(英语)显示 · 翻译待完成查看详情 →
Hatch II · 2006–2013
通报中等发动机NA

通报

N16 Engine: Oil Leak from Cylinder Head Sealing Plug. An oil leak can develop at a sealing plug located in the cylinder head, just below the vacuum pump. CAUSE The sealing plug was not tightened sufficiently during production.

NHTSA · 制造商通报10148391车型年份 2009–2012以原文(英语)显示 · 翻译待完成查看详情 →
Hatch II · 2006–2013
通报中等发动机NA

通报

N16 and N18 Engine Oil Leak. The customer states that a small engine oil leak can be seen from the underside of the engine. CAUSE The internal sealing of the oil pump volume control solenoid valve is compromised, allowing engine oil to leak from the oil pump volume control solenoid.

NHTSA · 制造商通报10148293车型年份 2009以原文(英语)显示 · 翻译待完成查看详情 →
Hatch III · 2013–2024
通报中等发动机NA

通报

"N14 and N18 Engine: High-pressure Pump Repair Instruction. INFORMATION The current version of ISTA/D Repair Instruction 13 51 017, ""Removing and installing or replacing high-pressure pump (N14, N18)"" has a procedure error. The current version of the Repair Instruction states to replace the high-pressure supply hose on the N14 engine. The Repair Instruction also states not to replace the high-pressure supply hose on the N18 engine. The N18 portion of the Repair Instruction is incorrect. As an interim solution, follow the procedure outlined below until this portion of the Repair Instruction is corrected. https://www.minitis.net/tiscode/cgi-bin/bulletin.aspx?sie_path=/tsb/bulletins/htm_store/159...2/5/2014 Page 2 of 2 Bosch High-pressure Pump (1): All vehicles equipped with the N18 engine and produced from 3/2012 and later When the engine is fitted with a Bosch High-pressure Pump (1), the highpressure supply hose (2) MUST NOT be replaced when making repairs. The remaining portion of the Repair Instruction and tightening torques is correct. Refer to EPC for the applicable part numbers when making repairs."

NHTSA · 制造商通报10147960车型年份 2013以原文(英语)显示 · 翻译待完成查看详情 →
更早 →

来源:NHTSA(美国,公有领域)、加拿大交通部(加拿大开放政府许可)、DVSA(英国,开放政府许可 v3.0)、RappelConso 与欧盟 Safety Gate(法国,开放许可 2.0)、日本国土交通省(公共数据许可1.0)、韩国国土交通部(car.go.kr)。