Frei lesbar · kostenloses Konto zum MitmachenNachfolger von Anticars (2000)

Audi A4 V

2008–2016 · 3 dokumentierte Mängel · 2 Märkte

Technische Bulletins (TSB) sind Reparaturanweisungen, die Hersteller ihren Händlern zu bekannten Problemen schicken. Sie sind keine Sicherheitsrückrufe, bestätigen aber oft einen Mangel.

SchweregradAlleMittelGering
Modelljahr
BulletinMittelKarosserieNA

Bulletin

Supersedes Technical Service Bulletin Group 57 number 11-54 dated August 18, 2011. Audi advanced key (keyless entry) is inoperative on all doors, but the engine can be started with the keyless starting system (keyless go). The keyless starting system (keyless go) is a standard feature; Audi advanced key is an optional feature. All vehicles have an engine start-stop button (-E408-) and touch sensor surface on the outer door handles, but this does not mean that the optional Audi advanced key function is installed.

NHTSA · Herstellerbulletin10128361Modelljahre 2016Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
BulletinMittelElektrikNA

Bulletin

?ANTENNA - A technical problem has occurred. Please contact your Audi dealer" is displayed in the driver information panel when in the SiriusXM band. Audio from the satellite radio is present. DTC 02617 (Satellite antenna) is stored in the radio (address word 56) with fault code 11 (Open circuit). Visually, the MMI and MIB antennas are the same, but each antenna draws a different amount of current. For this reason, if an MIB antenna has been installed on a vehicle with an MMI radio, it causes an open circuit DTC. The open circuit DTC will be set on an MMI radio if the current draw from the antenna falls below 60mA . A MIB antenna draws 55mA (+/- 10mA) 4G0-035-503-K. A MMI antenna draws 110mA (+/- 10mA) 4G0-035-503-J.

NHTSA · Herstellerbulletin10123772Modelljahre 2016Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
BulletinMittelFahrwerkNA

Bulletin

Tire vibration (with originally-installed 245/40 R18 93H Pirelli P6 Four Seasons tires) - Repair Authorization. Customer may report feeling a vibration while driving at highway speeds. This Repair Authorization bulletin only applies to vehicles within the Adjustment coverage period (up to 12/12), has originally-installed 245/40 R18 93H Pirelli P6 Four Seasons tires, tires that have an "AO" marking, and has the PR code HM3. Various parts have been replaced under warranty for the condition noted above, but no issues were identified with these parts.

NHTSA · Herstellerbulletin10118345Modelljahre 2016Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
BulletinMittelFahrwerkNA

Bulletin

On audi vehicles with electromechanical steering manufactured within a specific period, it is possible that the seal on the power steering control unit was not manufactured correctly.

NHTSA · Herstellerbulletin10106784Modelljahre 2016Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
BulletinMittelFahrwerkNA

Bulletin

On audi vehicles with electromechanical steering manufactured within a specific period, it is possible that the seal on the power steering control unit was not manufactured correctly.

NHTSA · Herstellerbulletin10106763Modelljahre 2016Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
BulletinGeringGetriebeNA

Bulletin

ZUSÄTZLICHE WARTUNGSPUNKTE: Zuerst bei 35.000 Meilen durchführen und danach alle 40.000 Meilen. DSG/S Tronic – ATF-Öl wechseln und Getriebefilterelement für die Kupplungshydraulik austauschen (nur A3, S3, TT, TTS, S5, S5, S5 Cabriolet, RS 5, S6 und S7) Hinzugefügt: Fußnote 3: "Für den 8K2 Audi S4 verwenden Sie die Wartungskarte für das Modelljahr 2015. Dies ist ein Push-Behind-Fahrzeug basierend auf dem PR-Code"

NHTSA · Herstellerbulletin10165519Modelljahre 2016Automatisch übersetzt · Original: EnglischDetails ansehen →
BulletinGeringFahrwerkNA

Bulletin

Überarbeitung von Reifen – nur 5K; hinzugefügt "(außer R8)"

NHTSA · Herstellerbulletin10153109Modelljahre 2016Automatisch übersetzt · Original: EnglischDetails ansehen →
BulletinGeringElektrikNA

Bulletin

Großer Wartungsabschnitt: GEÄNDERT: "(außer Audi A3 e-tron)" zu (nur Audi A3 etron)" am Ende von "Kühlsystem für elektrische Bauteile: Kühlmittelstand gemäß Beschreibung in ElsaPro prüfen" HINZUGEFÜGT: "(außer A3 e-tron)" am Ende von "Kühlsystem - Kühlmittelstand prüfen und bei Bedarf Kühlmittel hinzufügen"

NHTSA · Herstellerbulletin10133434Modelljahre 2016Automatisch übersetzt · Original: EnglischDetails ansehen →
BulletinGeringSonstigesNA

Bulletin

Major Maintenance Section: REMOVED: "Rollover protection: Check function with soft top down (Audi A5 Cabriolet and S5 Cabriolet only)" (Already listed under Time-Sensitive Maintenance Items)

NHTSA · Herstellerbulletin10133433Modelljahre 2016Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
BulletinGeringElektrikNA

Bulletin

This bulletin provides software update instructions for warning messages in the MMI when a user tries to manually refresh data or the vehicle cannot be locked or unlocked.

NHTSA · Herstellerbulletin10130743Modelljahre 2016Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
BulletinGeringSonstigesNA

Bulletin

This document contains the pre-delivery inspection technician reference document. The Pre-Delivery Inspection Technician Reference Document is designed to be a resource used in hand with the Pre-Delivery Inspection Checklist (PDI). The PDI Checklist has been simplified to make the process more efficient, and in doing so, this document has been created to be used as a reference for checklist items that may have additional information. On the PDI Checklist, you find that certain items have been notated with an asterisk symbol (*), this lets you know that additional information can be found in this Technician Reference Document.

NHTSA · Herstellerbulletin10128508Modelljahre 2016Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
BulletinGeringSonstigesNA

Bulletin

This document contains the Audi delivery guidelines checklist.

NHTSA · Herstellerbulletin10128466Modelljahre 2016Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
BulletinGeringMotorNA

Bulletin

This document contains the Audi maintenance schedule. The intervals shown in this table are based on vehicles operating under normal conditions. In case of severe conditions, such as extremely low temperatures, excessive dust, etc., it is necessary for certain operations to be carried out in between the given intervals. This applies particularly to engine oil changes and the cleaning or replacing of the air cleaner filter element.

NHTSA · Herstellerbulletin10128461Modelljahre 2016Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
BulletinGeringElektrikNA

Bulletin

This document contains the Audi pre-delivery inspection checklist. All items must be completed prior to customer delivery by an Audi technician. Audi recommends using an Audi approved battery charger to prevent excessive battery discharge during inspection. Refer to the Special functions tab of ODIS Diagnosis using GFF for the PDI function tests. It is advised to start ODIS with the engine running to enable all 5F Test Plans in GFF and also to ensure SVM sees all control units during the SVM check vehicle configuration. For items marked with *, please refer to the PDI Technician Reference Document posted on ServiceNet for additional information.

NHTSA · Herstellerbulletin10128493Modelljahre 2016Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
BulletinGeringSonstigesNA

Bulletin

This document contains the fluid capacity chart.

NHTSA · Herstellerbulletin10128486Modelljahre 2016Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
BulletinGeringElektrikNA

Bulletin

This document contains the Audi pre-delivery inspection checklist. All items must be completed prior to customer delivery by an Audi technician. Audi recommends using an Audi approved battery charger to prevent excessive battery discharge during inspection. Refer to the Special functions tab of ODIS Diagnosis using GFF for the PDI function tests. It is advised to start ODIS with the engine running to enable all 5F Test Plans in GFF and also to ensure SVM sees all control units during the SVM check vehicle configuration. For items marked with *, please refer to the PDI Technician Reference Document posted on ServiceNet for additional information. This document is in Spanish.

NHTSA · Herstellerbulletin10128441Modelljahre 2016Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
BulletinGeringSonstigesNA

Bulletin

This document contains the Audi delivery guidelines checklist. This document is in Spanish.

NHTSA · Herstellerbulletin10128440Modelljahre 2016Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
BulletinGeringGetriebeNA

Bulletin

Added to: DSG/S tronic - "Change ATF oil and replace transmission filter element for clutch hydraulics"

NHTSA · Herstellerbulletin10128250Modelljahre 2016Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
BulletinGeringSonstigesNA

Bulletin

This document contains the pre-delivery inspection technician reference document. The Pre-Delivery Inspection Technician Reference Document is designed to be a resource used in hand with the Pre-Delivery Inspection Checklist (PDI). The PDI Checklist has been simplified to make the process more efficient, and in doing so, this document has been created to be used as a reference for checklist items that may have additional information. On the PDI Checklist, you find that certain items have been notated with an asterisk symbol (*), this lets you know that additional information can be found in this Technician Reference Document. This document is in Spanish.

NHTSA · Herstellerbulletin10124703Modelljahre 2016Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
BulletinGeringFahrwerkNA

Bulletin

This document contains the Audi tire chain information by vehicle.

NHTSA · Herstellerbulletin10124694Modelljahre 2016Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
BulletinGeringFahrwerkNA

Bulletin

This document contains the Audi normal load condition tire pressure table.

NHTSA · Herstellerbulletin10124693Modelljahre 2016Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
BulletinGeringFahrwerkNA

Bulletin

This document contains the tire pressure table for Audi vehicles. This document is in Spanish.

NHTSA · Herstellerbulletin10124692Modelljahre 2016Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
BulletinGeringElektrikNA

Bulletin

This document contains the Audi pre-delivery inspection checklist. All items must be completed prior to customer delivery by an Audi technician. Audi recommends using an Audi approved battery charger to prevent excessive battery discharge during inspection. ALL PDI function tests must be run in Guided Fault Finding (GFF) only. Do NOT use Guided Functions for any PDI related test as these will not be uploaded to the Paperless Server. Refer to the Special functions tab of ODIS Diagnosis for using GFF for PDI function tests. It is advised to start ODIS with the engine running to enable all 5F Test Plans in GFF and also to ensure SVM sees all control units during the SVM check vehicle configuration. For items marked with *, please refer to the PDI Technician Reference Document posted on ServiceNet for additional information.

NHTSA · Herstellerbulletin10123796Modelljahre 2016Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
BulletinGeringMotorNA

Bulletin

This document contains the Audi maintenance schedule. First standard maintenance service at 5,000 miles or 1 year after delivery, whichever occurs first. Standard maintenance services thereafter occur at intervals of 10,000 miles or 1 year after the last standard maintenance service, whichever occurs first. First major maintenance service at 15,000 miles or 2 years after delivery, whichever occurs first. Major maintenance services thereafter occur at intervals of 20,000 miles or 2 years after the last major maintenance service, whichever occurs first. The intervals shown in this table are based on vehicles operating under normal conditions. In case of severe conditions, such as extremely low temperatures, excessive dust, etc., it is necessary for certain operations to be carried out in between the given intervals. This applies particularly to engine oil changes and the cleaning or replacing of the air cleaner filter element.

NHTSA · Herstellerbulletin10123756Modelljahre 2016Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
BulletinGeringMotorNA

Bulletin

This document contains the Audi maintenance schedule. First standard maintenance service at 5,000 miles or 1 year after delivery, whichever occurs first. Standard maintenance services thereafter occur at intervals of 10,000 miles or 1 year after the last standard maintenance service, whichever occurs first. First major maintenance service at 15,000 miles or 2 years after delivery, whichever occurs first. Major maintenance services thereafter occur at intervals of 20,000 miles or 2 years after the last major maintenance service, whichever occurs first. The intervals shown in this table are based on vehicles operating under normal conditions. In case of severe conditions, such as extremely low temperatures, excessive dust, etc., it is necessary for certain operations to be carried out in between the given intervals. This applies particularly to engine oil changes and the cleaning or replacing of the air cleaner filter element.

NHTSA · Herstellerbulletin10123755Modelljahre 2016Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
Ältere →

Quellen: NHTSA (USA, gemeinfrei), Transport Canada (Open Government Licence – Canada), DVSA (Vereinigtes Königreich, Open Government Licence v3.0), RappelConso und EU-Safety-Gate (Frankreich, Licence Ouverte 2.0), MLIT (Japan, Public Data License 1.0) und MOLIT (Südkorea, car.go.kr).