Kraftfahrzeuge - Karosserie (Insassenschutzmittel)
Der Gasgenerator im Fahrerairbag kann bersten.
🔔 Kostenloses Konto anlegen und Benachrichtigungen zu BMW 3er (E46) erhalten
Der Gasgenerator im Fahrerairbag kann bersten.
Bij de gasgenerator van de bestuurdersairbag kunnen er storingen ontstaan als deze door de jaren werd blootgesteld aan hoge absolute luchtvochtigheid en hoge temperatuurschommelingen
Der Inflator des Fahrerairbags kann aufgrund langfristiger Verschlechterung nicht richtig funktionieren. In diesem Fall kann bei einem Unfall der Innendruck im Inflator zu hoch sein. Der Inflator könnte platzen. Metallsplitter können Verletzungen verursachen.
Betroffene Fahrzeuge sind in den Märkten, in denen sie zuvor zugelassen waren, bereits in Sicherheitsrückrufen erfasst. Die Fahrzeuge können mit einem Fahrer- und/oder Beifahrerairbag ausgestattet sein, der bei Auslösung mit übermäßiger Kraft auslösen kann, wodurch scharfkantige Metallsplitter freigesetzt werden. Dies kann zu schweren Verletzungen führen, die für Personen in der Umgebung tödlich sein können.
Der Treibstoff im Fahrerairbag kann sich im Laufe der Zeit zersetzen. Wenn sich der Airbag auslöst, können Bruchstücke des Gasgenerators die Insassen des Fahrzeugs verletzen.
For vehicles fitted with a Takata front passenger airbag with a PSPI inflator these vehicles have previously received a like for like replacement front passenger airbag via a previous safety recall campaign.
Falls der Beifahrerairbag bereits ersetzt wurde, kann der Gasgenerator nach einigen Jahren dennoch aufgrund von Schwankungen der Luftfeuchtigkeit und Temperatur defekt werden.
Le propulsif dans l’airbag passager peut se détériorer en raison de fortes variations d’humidité et de température. en cas d’accident dans lequel le coussin gonflable se déploie, cela pourrait entraîner des fragments de l’enveloppe du gonfleur qui se détachent et blessent les occupants du véhicule.
Issue: This recall applies to vehicles that may be equipped with a replacement sport or M-sport steering wheel that has a Takata airbag. Long-term exposure to high absolute humidity and temperature, combined with high temperature cycling, may eventually degrade the propellant contained in the driver-front airbag. This could cause the airbag to deploy with more force than normal. If the airbag inflator ruptures, fragments could be propelled toward vehicle occupants or cause damage to the airbag assembly, preventing its proper function. Safety Risk: If the vehicle is involved in a crash requiring an airbag deployment, the airbag inflator could rupture and create a risk of injury. Corrective Actions: BMW will notify owners by mail and advise you to take your vehicle to a dealership to inspect and, if necessary, replace the driver-front airbag module. To learn if your vehicle is affected by this recall, owners may: • Visit <a href= https://www.bmw.ca/en/ssl/VehicleRecall.html> https://www.bmw.ca/en/ssl/VehicleRecall.html</a> • Contact your preferred or local BMW Retailer • Call BMW Customer Relations Recall Services at 1-855-217-3002
BMW of North America, LLC (BMW) is recalling certain 2006-2011 3 Series Sedan (324i, 325i, 325xi, 328i, 328xi, 330i, 330xi, 335i, 335xi), 2006-2012 3 Series Sportswagon (325xi, 328i, 328xi), and 2009-2011 3 Series Sedan (335d) vehicles. The original steering wheel may have been replaced with a sport or M-sport steering wheel equipped with an inflator that can explode during deployment.
The propellant within the integrated inflator of driver airbags can deteriorate during time. If the airbag deploys, it could result in fragments from the inflator casing injuring the vehicle’s occupants.
Le propulsif dans l’airbag passager peut se détériorer en raison de fortes variations d’humidité et de température. en cas d’accident dans lequel le coussin gonflable se déploie, cela pourrait entraîner des fragments de l’enveloppe du gonfleur qui se détachent et blessent les occupants du véhicule.
블로우바이히터의 생산 품질 불량으로 플라스틱 코팅이 단락 열에 의해 녹아 매우 드문 경우 화재가 발생할 수 있는 가능성에 따른 리콜 (*다만 단락이 발생될 경우 엔진경고등(MIL)이 점등되며 이러한 경우, 냄새 또는 연기를 통해 운전자가 이 사실을 바르게 인지할 수 있음) <*대상차량별 생산일자> BMW 128i: 2008.09.25 BMW 128i: 2008.03.17~2008.07.11 BMW 128i: 2008.02.04~2009.06.23 BMW 128i: 2010.09.03~2012.03.02 BMW 128i: 2010.04.26 BMW 323i: 2009.04.17 BMW 323i: 2006.09.04 BMW 325i: 2004.12.15~2007.01.22 BMW 325i: 2005.05.04~2006.08.17 BMW 325i: 2005.09.15~2006.05.10 BMW 325xi: 2005.11.22~2006.05.23 BMW 325xi: 2005.07.14 BMW 328i: 2011.07.04~2012.11.12 BMW 328i: 2010.10.18~2011.03.14 BMW 328i: 2010.11.18~2012.08.28 BMW 328i: 2011.02.14~2011.09.23 BMW 328i: 2008.09.02~2009.04.30 BMW 328i: 2008.09.16~2008.10.22 BMW 328i: 2009.04.07~2011.07.25 BMW 328i: 2009.02.13~2009.05.21 BMW 328i: 2010.07.08~2011.10.14 BMW 328i: 2009.09.21~2010.10.05 BMW 328i: 2008.08.21~2008.11.13 BMW 328i: 2009.02.16 BMW 328i: 2009.09.24~2011.07.25 BMW 328i: 2009.10.07~2010.09.27 BMW 328i: 2006.08.24~2008.02.20 BMW 328i: 2006.09.02~2008.07.29 BMW 328i: 2006.10.30~2008.06.13 BMW 328i: 2006.09.11~2008.04.03 BMW 328i: 2008.07.02 BMW 328i: 2006.06.26~2009.01.20 BMW 328i: 2007.05.30~2009.07.29 BMW 328i: 2007.03.24~2009.04.27BMW 328i: 2009.10.08~2009.12.01 BMW 328i: 2006.11.15~2009.07.24 BMW 328i: 2009.11.03 BMW 328i Convertible: 2009.12.08~2013.07.24 BMW 328i Convertible: 2006.12.12~2010.01.20 BMW 328i xDrive: 2010.06.18 BMW 328xi: 2009.07.24 BMW 328xi: 2009.09.08~2010.10.08 BMW 328xi: 2011.10.06~2011.12.05 BMW 328xi: 2008.10.31~2009.07.24 BMW 328xi: 2009.10.16~2011.08.02 BMW 328xi: 2008.10.15 BMW 328xi: 2006.10.11~2007.12.12 BMW 328xi: 2006.09.11~2007.09.24 BMW 328xi: 2006.10.23~2009.01.22 BMW 328xi: 2006.09.28~2009.01.28 BMW 328xi: 2009.09.14 BMW 330i: 2004.11.24~2006.07.06 BMW 330i: 2005.03.04~2006.06.14BMW 330xi: 2005.10.26~2006.06.02 BMW 523i: 2005.02.18~2007.02.23 BMW 525i: 2005.03.18~2006.10.04 BMW 525i: 2005.03.07~2006.12.07 BMW 525xi: 2005.07.28~2006.06.26 BMW 528i: 2007.02.21~2009.12.17 BMW 528i: 2007.03.26~2009.01.29 BMW 528i: 2009.07.01~2009.11.26 BMW 528xi: 2007.04.23~2008.11.24 BMW 528xi: 2009.04.14~2009.11.09 BMW 530i: 2005.03.17~2006.12.20 BMW 530i: 2005.03.14~2007.02.22 BMW 530i: 2005.06.17~2006.11.02 BMW 530i: 2007.02.21~2009.09.23 BMW 530xi: 2006.03.08~2006.12.20 BMW 530xi: 2005.07.06 BMW 730i: 2005.03.11~2006.09.21 BMW 730Li: 2005.03.11~2007.03.05 BMW X3 3.0i: 2006.09.05~2007.03.27 BMW X3 3.0i: 2007.07.16~2007.09.07 BMW X3 3.0si: 2007.01.23~2007.04.16 BMW X3 3.0si: 2006.08.29~2009.03.02 BMW X3 3.0si: 2009.09.01~2010.01.13 BMW X5 3.0si: 2007.03.23~2010.02.23 BMW X5 3.0si: 2007.02.10~2009.07.22 BMW X5 3.0si: 2009.12.03~2010.01.21 BMW X5 xDrive30i: 2007.02.02~2008.08.04 BMW X5 xDrive30i: 2009.10.12 BMW xDrive30: 2006.10.11~2009.06.02 BMW xDrive30: 2009.10.01~2009.11.30 BMW Z4 3.0i: 2006.03.01~2008.07.16 BMW Z4 3.0si: 2006.01.11~2007.06.14 BMW Z4 3.0si: 2006.03.10~2006.09.19 BMW Z4 3.0si: 2006.07.25~2008.03.14 BMW Z4 3.0si Coupe: 2006.07.05~2007.06.28 BMW Z4 sDrive: 2010.09.17~2011.06.07 BMW Z4 sDrive30i: 2009.04.22~2011.07.29 ?
助手席エアバッグのインフレーター(膨張装置)について、長期間にわたり、著しく高温多湿な環境下にさらされると、当該インフレーターに水分が浸入する可能性があり、結果として、エアバッグ展開時にインフレーター内圧が異常上昇し、インフレーター容器が破損して飛び散り、乗員が負傷するおそれがある。
Aufgrund einer fehlerhaften Kunststofffertigung des Blowby-Heizers weist die Isolierung am PTC-Heizelement Unregelmäßigkeiten auf, wodurch das PTC-Heizelement mit der Zeit kurzschließen kann. Eine Sicherung schützt es dabei nicht zuverlässig. Dadurch kann sich das PTC-Heizelement übermäßig erhitzen, das Gehäuse schmelzen, die Motorwarnleuchte aufleuchten und im schlimmsten Fall ein Brand entstehen.
**Problem:** Bei bestimmten Fahrzeugen mit einem 6-Zylinder-Motor vom Typ N52 oder N52K könnte ein Fertigungsfehler dazu führen, dass die Heizung des PCV-Ventils (Blow-by-Heizung) einen Kurzschluss verursacht und überhitzt. **Hinweis:** Diese Maßnahme ersetzt die Rückrufe 2017-470 und 2019-170 von Transport Canada. Nur Fahrzeuge mit einem Motor vom Typ N52 oder N52K benötigen diese Reparatur. **Sicherheitsrisiko:** Eine überhitzte Heizung des PCV-Ventils am Motor kann zu einem Brandrisiko führen, auch wenn das Fahrzeug geparkt und ausgeschaltet ist. **Korrekturmaßnahmen:** BMW wird die Halter per Post benachrichtigen und sie anweisen, das Fahrzeug zu einem Händler zu bringen, um einen Reparatursatz für den Kabelbaum installieren zu lassen. BMW empfiehlt, das Fahrzeug bis zum Abschluss der Rückrufreparatur im Freien zu parken.
BMW of North America, LLC (BMW) ruft bestimmte Fahrzeuge zurück: 2008–2013 1 Series Coupe (128i); 2007–2013 3 Series Coupe (328i, 328xi, 328i xDrive); 2007–2010 X3 SAV (X3 3.0si, X3 xDrive30i); 2008–2013 1 Series Convertible (128i); 2006–2011 3 Series Sedan (325i, 325xi, 328i, 328xi, 328i xDrive, 330i, 330xi); 2006–2012 3 Series Wagon (328i, 328i xDrive); 2007–2013 3 Series Convertible (328i); 2006–2010 5 Series Sedan (525i, 525xi, 528i, 528xi, 530i, 530xi); 2006–2007 5 Series Wagon (530xi); 2007–2010 X5 SAV (X5 3.0si, X5 xDrive30i); 2006–2008 Z4 Coupe (Z4 3.0si); und 2006–2011 Z4 Roadster (Z4 3.0i, Z4 3.0si, Z4 sDrive30i). Die Heizung des Ventils für die Kurbelgehäuseentlüftung (PCV-Ventil) kann einen Kurzschluss verursachen.
運転者席用エアバッグのインフレータ(膨張装置)において、吸湿防止が不適切なため、ガス発生剤が吸湿する可能性がある。そのため、使用過程でガス発生剤が吸湿や乾燥を繰返した場合など、衝突時等のエアバッグ作動時に正常に展開しないおそれがあり、インフレータ内の圧力が上昇して容器が破損することにより、乗員が負傷するおそれがある。
Issue: This recall is for vehicles that had an inspection performed under recall 2019-599, 2019-600 or 2019-601, but where the airbag inflator was not replaced. This new recall will provide replacement of the airbag inflator. On certain cars, exposure to moisture over time could cause the driver-front airbag not to inflate properly in a crash. In some cases, this could cause an airbag not to fully inflate, while in others it could cause it to deploy with more force than normal. It could also cause the inflator to rupture. If the airbag inflator ruptures, small pieces of metal could be propelled toward vehicle occupants or cause damage to the airbag and prevent its proper function. Safety Risk: In a crash requiring an airbag deployment, the driver-front airbag may not inflate properly or the inflator could rupture. This could create a risk of injury. Corrective Actions: BMW will notify owners by mail and instruct you to take your car to a dealer to replace the driver-front airbag inflator.
BMW of North America, LLC (BMW) is recalling certain 2000-2001 BMW 3 Series (323Ci, 325Ci, 328Ci and 330Ci), 1999-2001 323i, 328i, 330i, 330xi, and 2000 323i, 328i stationwagon vehicles equipped with Non-Azide Driver air bag Inflators (NADI) manufactured by Takata. These vehicles are equipped with driver-side air bag inflators that were previously inspected, but not replaced under recall numbers 19V-851, 19V852, or 19V-853. Due to a manufacturing issue, the NADI inflator may absorb moisture, causing the inflator to explode or the air bag cushion to underinflate.
助手席用エアバッグのインフレータ(膨張装置)について、長期間にわたり、著しく高温多湿な環境下にさらされると、当該インフレータに水分が浸入する可能性があり、結果として、エアバッグ展開時にインフレータ内圧が異常上昇し、インフレータ容器が破損して飛び散り、乗員が負傷するおそれがある。
運転者席用エアバッグのインフレータ(膨張装置)において、吸湿防止が不適切なため、ガス発生剤が吸湿する可能性がある。そのため、使用過程でガス発生剤が吸湿や乾燥を繰返した場合など、衝突時等のエアバッグ作動時に正常に展開しないおそれがあり、インフレータ内の圧力が上昇して容器が破損することにより、乗員が負傷するおそれがある。
Issue: This recall is for certain vehicles that had an airbag inflator replaced as a part of an earlier recall campaign. This recall provides a final repair. Long-term exposure to high absolute humidity and temperature, combined with high temperature cycling, may eventually degrade the propellant contained in the passenger-front airbag. This could cause the airbag to deploy with more force than normal. If the airbag inflator ruptures, fragments could be propelled toward vehicle occupants or cause damage to the airbag assembly, preventing its proper function. Safety Risk: If the vehicle is involved in a crash requiring an airbag deployment, the airbag inflator could rupture and create a risk of injury. Corrective Actions: Owners will be notified by mail and instructed to take their vehicle to a dealer to inspect the passenger-front airbag module. The passenger-front airbag module will be replaced as necessary. Note: The Canadian climate results in the propellant degrading slowly. This recall is being conducted as a precaution to address future risk. It is expected that all airbag inflators will be replaced before their function would be affected.
BMW of North America, LLC (BMW) is recalling certain 2000-2005 323iT, 325iT, 325xiT, 320i, 323i, 325i, 325xi, 328i, 330i and 330xi and 2000-2006 323Ci, 325Ci, 328Ci, 330Ci, M3 Coupe, 323Cic, 325Cic, 330Cic, and M3 Convertible vehicles equipped with non-desiccated frontal Takata PSAN inflators and PSPI passenger frontal air bag inflators containing phase stabilized ammonium nitrate (PSAN) propellant that were used as interim remedy parts for previous Takata recalls. These inflators may explode due to propellant degradation occurring after long-term exposure to high absolute humidity, high temperatures, and high temperature cycling.
BMW of North America, LLC (BMW) is recalling certain 2008-2013 128i and 135i Convertibles, 128i, 135i, and M Coupes, 2007-2010 X3 30si and X3 xDrive30i, 2013-2015 X1 sDrive28i, X1 xDrive28i and X1 xDrive35i, 2007-2013 328i, 328i xDrive, 335i, 335is, 335i xDrive and M3 Coupes, 2006-2011 328i, 328xi, 328i xDrive, 325i, 325xi, 330i, 330xi, 335i, 335xi, 335i xDrive and M3, 2009-2011 335D, 2006-2012 325xi, 328i, 328xi and 328i xDrive, 2010-2011 X6 ActiveHybrid, 2007-2013 328i, 335i, 335is, M3 Coupes, X5 30si, X5 xDrive30i, X5 xDrive35i, X5 48i, X5 xDrive48i, X5 xDrive50i and X5 M, 2009-2013 X5 xDrive35d and 2008-2014 X6 xDrive35i, X6 xDrive50i and X6M vehicles equipped with non-desiccated driver frontal air bag inflators containing phase stabilized ammonium nitrate (PSAN) that were used as interim remedy parts for previous Takata recalls. These inflators may explode due to propellant degradation occurring after long-term exposure to high absolute humidity, high temperatures, and high temperature cycling.
Quellen: NHTSA (USA, gemeinfrei), Transport Canada (Open Government Licence – Canada), DVSA (Vereinigtes Königreich, Open Government Licence v3.0), RappelConso und EU-Safety-Gate (Frankreich, Licence Ouverte 2.0), MLIT (Japan, Public Data License 1.0) und MOLIT (Südkorea, car.go.kr).