Frei lesbar · kostenloses Konto zum MitmachenNachfolger von Anticars (2000)

Chevrolet Volt

2010–2019 · 12 dokumentierte Mängel · 3 Märkte

Technische Bulletins (TSB) sind Reparaturanweisungen, die Hersteller ihren Händlern zu bekannten Problemen schicken. Sie sind keine Sicherheitsrückrufe, bestätigen aber oft einen Mangel.

SchweregradAlleMittelGering
Modelljahr
MarktAlleNA
BulletinMittelBremsenNA

Bulletin

Service Update for Inventory and Customer Erroneous Electric Park Brake Message and Light, DTC C027D Expires with Base Warranty

NHTSA · Herstellerbulletin10246661Modelljahre 2012Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
BulletinMittelBremsenNA

Bulletin

FMVSS NONCOMPLIANCE RECALL - Front Brakes Lock During ABS, Stability Control, or Traction Control Activation

NHTSA · Herstellerbulletin10246757Modelljahre 2012Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
BulletinMittelElektrikNA

Bulletin

Kein Durchdrehen/kein Start, leere Batterie aufgrund von Ruhestromverbrauch/Entladung.

NHTSA · Herstellerbulletin10254206Modelljahre 2011Automatisch übersetzt · Original: EnglischDetails ansehen →
BulletinMittelInnenraumNA

Bulletin

This informational bulletin provides information regarding the Passenger Presence System (PPS) May Command Seat Belt Reminder Chime and Passenger Airbag Indicator On When Electronic Devices or Conductive Objects are Placed on Front Passenger Seat

NHTSA · Herstellerbulletin10138552Modelljahre 2013Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
BulletinMittelBremsenNA

Bulletin

12266 - Service Update. During vehicle startup, the Electric Park Brake telltale and the Service Electric Parking Brake telltale may illuminate in error. Dealers are to reprogram the Electronic Parking Bracke Control Module.

NHTSA · Herstellerbulletin10138228Modelljahre 2013Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
BulletinMittelElektrikNA

Bulletin

This Preliminary Information communication provides information to the technician about vehicles that may have misfires or rough running on cold start up. Technician may find a Diagnostic Trouble Code P0300. Technician will need to use a scan tool and observe Crankshaft Position Re-sync Counter parameter. The Re-sync Counter parameter should remain at 0 during all operating conditions, and while manipulating the related harnesses and connectors between the crankshaft position sensor and the Engine Control Module. Technician will need to inspect for water intrusion in related connectors, terminals, and components. Tech will need to bring the vehicle up to engine coolant temperature that was stored when Diagnostic Trouble Code P0300 was set. After the engine coolant temperature is up to temperature technician will need to perform compression and cylinder leakage and record the readings. Technician should also verify correct fuel system pressure, inspect the heated oxygen sensors for contamination from fuel, silicon, or the incorrect use of room temperature vulcanization silicone sealant, and inspect the spark plugs for incorrect heat range, coolant or oil fouling, carbon tracking, cracks or insulator fractures at the tip. Technician should also Test for coolant contamination into the cylinders.

NHTSA · Herstellerbulletin10129886Modelljahre 2012Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
BulletinMittelFahrwerkNA

Bulletin

This preliminary bulletin provides a procedure to reprogram the power steering module to correct the customers concern of the MIL on and a drop in power steering assist.

NHTSA · Herstellerbulletin10126211Modelljahre 2012Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
BulletinMittelFahrwerkNA

Bulletin

This preliminary informational bulletin provides a procedure to reprogram the electronic power steering control module for comments regarding a indicator lamp illuminated and DTC C0544 and U0415 set.

NHTSA · Herstellerbulletin10126172Modelljahre 2012Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
BulletinMittelInnenraumNA

Bulletin

This informational bulletin provides information regarding the Passenger Presence System (PPS) May Command Seat Belt Reminder Chime and Passenger Airbag Indicator On When Electronic Devices or Conductive Objects are Placed on Front Passenger Seat

NHTSA · Herstellerbulletin10113824Modelljahre 2013Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
BulletinMittelElektrikNA

Bulletin

This Preliminary Information communication provides information to the technician about vehicles that may have misfires or rough running on cold start up. Technician may find a Diagnostic Trouble Code P0300. Technician will need to use a scan tool and observe Crankshaft Position Re-sync Counter parameter. The Re-sync Counter parameter should remain at 0 during all operating conditions, and while manipulating the related harnesses and connectors between the crankshaft position sensor and the Engine Control Module. Technician will need to inspect for water intrusion in related connectors, terminals, and components. Tech will need to bring the vehicle up to engine coolant temperature that was stored when Diagnostic Trouble Code P0300 was set. After the engine coolant temperature is up to temperature technician will need to perform compression and cylinder leakage and record the readings. Technician should also verify correct fuel system pressure, inspect the heated oxygen sensors for contamination from fuel, silicon, or the incorrect use of room temperature vulcanization silicone sealant, and inspect the spark plugs for incorrect heat range, coolant or oil fouling, carbon tracking, cracks or insulator fractures at the tip. Technician should also Test for coolant contamination into the cylinders.

NHTSA · Herstellerbulletin10113340Modelljahre 2012Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
BulletinMittelElektrikNA

Bulletin

This Preliminary Information communication provides information to the technician about vehicles that may have misfires or rough running on cold start up. Technician may find a Diagnostic Trouble Code P0300. Technician will need to use a scan tool and observe Crankshaft Position Re-sync Counter parameter. The Re-sync Counter parameter should remain at 0 during all operating conditions, and while manipulating the related harnesses and connectors between the crankshaft position sensor and the Engine Control Module. Technician will need to inspect for water intrusion in related connectors, terminals, and components. Tech will need to bring the vehicle up to engine coolant temperature that was stored when Diagnostic Trouble Code P0300 was set. After the engine coolant temperature is up to temperature technician will need to perform compression and cylinder leakage and record the readings. Technician should also verify correct fuel system pressure, inspect the heated oxygen sensors for contamination from fuel, silicon, or the incorrect use of room temperature vulcanization silicone sealant, and inspect the spark plugs for incorrect heat range, coolant or oil fouling, carbon tracking, cracks or insulator fractures at the tip. Technician should also Test for coolant contamination into the cylinders.

NHTSA · Herstellerbulletin10112076Modelljahre 2012Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
BulletinMittelGetriebeNA

Bulletin

12241 - customer satisfaction program. Vehicles can be affected by incorrect calendar date information sent through the telematics systems. If a significantly incorrect date is received (for example, 00/00/0000), and the vehicle is in the "delayed rate and departure time" charging mode, the hybrid powertrain control module (hpcm2) may reset and open the propulsion power relays. As a result, the electric motor has temporarily stopped working due to this software anomaly when their vehicle is in the delayed time and rate charge mode.

NHTSA · Herstellerbulletin10089702Modelljahre 2013Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
BulletinMittelInnenraumNA

Bulletin

15642 - special coverage. On some 2011 model year chevrolet volt vehicles, the airbag indicator may illuminate. This may be caused by the sensing and diagnostic module (sdm) monitoring an increase in the resistance of the driver or passenger side-impact airbag deployment loop circuits. This increased resistance may be caused by loose terminal crimps in either the driver or passenger seat mounted side-impact airbag wiring harness connectors. Dealers are to inspect for the presence of specific diagnostic trouble codes (dtcs) and, if necessary, bypass the harness connectors and repair wiring in the driver and/or passenger front side-impact airbag deployment loop circuits. The repairs will be made at no charge to the customer.

NHTSA · Herstellerbulletin10089494Modelljahre 2011Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
BulletinMittelInnenraumNA

Bulletin

15642 - special coverage. On some 2011 model year chevrolet volt vehicles, the airbag indicator may illuminate. This may be caused by the sensing and diagnostic module (sdm) monitoring an increase in the resistance of the driver or passenger side-impact airbag deployment loop circuits. This increased resistance may be caused by loose terminal crimps in either the driver or passenger seat mounted side-impact airbag wiring harness connectors. Dealers are to inspect for the presence of specific diagnostic trouble codes (dtcs) and, if necessary, bypass the harness connectors and repair wiring in the driver and/or passenger front side-impact airbag deployment loop circuits. The repairs will be made at no charge to the customer.

NHTSA · Herstellerbulletin10089435Modelljahre 2011Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
BulletinMittelInnenraumNA

Bulletin

Special Coverage Adjustment - Side Impact Airbag Connectors

NHTSA · Herstellerbulletin10247256Modelljahre 2011Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
BulletinMittelInnenraumNA

Bulletin

Passenger Presence System (PPS) May Command Seat Belt Reminder Chime Passenger Airbag Indicator On When Electronic Devices or Conductive Objects are Placed on Front Passenger Seat

NHTSA · Herstellerbulletin10245786Modelljahre 2013Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
BulletinMittelFahrwerkNA

Bulletin

Buick/chevrolet/gmc/opel: Power steering assistance malfunctions while either turning left or right. Models 2012 opel ampera, volt, 2013 lacrosse, regal, equinox, malibu, terrain, opel insignia. *pe updated 08/1/2013 *js updated 11/25/2013 *js updated 1/13/15. *pe

NHTSA · Herstellerbulletin10050239Modelljahre 2012Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
BulletinMittelInnenraumNA

Bulletin

Gm: See document search button for owner letter. Driver airbag inspection. *kb updated 5/23/12. *pe

NHTSA · Herstellerbulletin10043905Modelljahre 2012Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
BulletinMittelSonstigesNA

Bulletin

Gm: See document search button for owner letter. Carpeted floor mats missing. Dealers are to install carpeted floor mats when mats become available. *js

NHTSA · Herstellerbulletin10043856Modelljahre 2012Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
BulletinMittelFahrwerkNA

Bulletin

General motors: Reservoir for power steering fluid is heat damaged and leaking. May caused problems with power steering pump. *pe

NHTSA · Herstellerbulletin10043629Modelljahre 2012Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
BulletinMittelFahrwerkNA

Bulletin

Buick/chevrolet: It is hard to remove driver's side air bag due to revised spring design, which causes higher retaining force between driver's side air bag and steering wheel. *pe

NHTSA · Herstellerbulletin10043315Modelljahre 2012Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
BulletinMittelElektrikNA

Bulletin

Chevrolet: On certain vehicles, after updated calibrations were installed, may exhibit a possible and an estimated electric range drop. *pe updated 12/7/11. *pe

NHTSA · Herstellerbulletin10042364Modelljahre 2011Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
BulletinMittelFahrwerkNA

Bulletin

Gm: The steering wheel adjustment is binding or sticking. This is caused by the steering wheel lever adjustment nut tightening. *rm

NHTSA · Herstellerbulletin10038705Modelljahre 2011Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
BulletinMittelMotorNA

Bulletin

Gm: There is an engine oil leak at the front engine cover. 2011 volt. *rm updated 6/27/11. *pe

NHTSA · Herstellerbulletin10038466Modelljahre 2011Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
BulletinMittelInnenraumNA

Bulletin

Gm: There are seat belt problems: Difficulty latching and unlatching buckle. Buckle release button is sticking. Seat belt warning light illuminated. Likely caused by sticky beverages that are spilled into the buckle assembly. *rm updated 4/3/12. *pe

NHTSA · Herstellerbulletin10038294Modelljahre 2011Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
Ältere →

Quellen: NHTSA (USA, gemeinfrei), Transport Canada (Open Government Licence – Canada), DVSA (Vereinigtes Königreich, Open Government Licence v3.0), RappelConso und EU-Safety-Gate (Frankreich, Licence Ouverte 2.0), MLIT (Japan, Public Data License 1.0) und MOLIT (Südkorea, car.go.kr).