Motor und Motorkühlung:Motor
Die Ventildeckeldichtung kann sich verschieben und einen Motorölaustritt an der Dichtung verursachen.
🔔 Kostenloses Konto anlegen und Benachrichtigungen zu Dodge Aries (alle generationen) erhalten
Die Ventildeckeldichtung kann sich verschieben und einen Motorölaustritt an der Dichtung verursachen.
Bei Fahrzeugen mit 2,2-Liter- oder 2,5-Liter-EFI-Motor (ohne Turbolader) kann die Ventildeckeldichtung undicht werden und Öl austreten lassen, wodurch die Gefahr eines Motorraumbrandes entsteht. Korrektur: Die Ventildeckeldichtung wird durch einen überarbeiteten Ventildeckel ersetzt, und anstelle der Dichtung wird RTV-Dichtmasse aufgetragen.
Fahrzeuge mit 2,2-Liter-Propanmotoren können Korrosion der Füll- und Ausfallanschlussanschlüsse (80 % Füllwert) am Einfüllventil erleben. Im Vorhandensein einer Zündquelle kann es zu einem Brand oder einer Explosion kommen. Berichtigung: Für verdächtige Fahrzeuge werden die Füll- und Ausfallschläuche ersetzt, ein verbesserter Schutzschirm und Rostschutz an den Anschlüssen angebracht.
Note: These vehicles were sold to bell, d.N.D., and r.C.M.P. These vehicles were built with a fuel hose which may have had its fittings aligned in a manner which could cause abrasion damage due to engine rocking and result in a fuel leak, thereby creating the risk of fire.
The potential for fuel leakage exists in the engine compartment at the fuel reservoir seam and its hose connections. The fuel reservoir is a silver colored can mounted to the air cleaner.
On certain vehicles, the hydraulic brake line may come into contact with the exhaust system hanger bolt, which can eventually lead to brake fluid leakage. This could result in a partial loss of braking capability. Should this occur, the brake warning light on the instrument panel will alert the driver.
Hydraulic brake tube routing to the rear wheels may alloow interference between the tube and the rear park brake cable. Resulting abrasion could cause tube failure and partial loss of braking capability. The instrument panel light will provide warning of the partial loss.
Brake fluid may contain an excessive amount of water. This can cause degradation of braking performance or brake failure under a variety of circumstances.
Das Querträger der Vorderachse kann an den hinteren Querträgern des unteren Querarms korrodieren und versagen, wenn es dort betrieben wird, wo Salz zur Unterstützung der Schneeräumung verwendet wird.
On certain vehicles, the crossmember can become abnormally corroded at the lower control arm attachment. This could result in lower control arm separation and loss of vehicle control. Correction: crossmembers will be inspected and replaced if corrosion is excessive. Remainder will have crossmember retaining brackets installed. Wait, I need to actually translate this into German. Here is the translation: Bei bestimmten Fahrzeugen kann der Querträger an der Befestigung des unteren Querlenkers ungewöhnlich stark korrodieren. Dies kann zum Lösen des unteren Querlenkers und zum Verlust der Fahrzeugkontrolle führen. Korrektur: Querträger werden überprüft und bei übermäßiger Korrosion ersetzt. Bei den übrigen Fahrzeugen werden Haltehalterungen für den Querträger montiert.
Diese Fahrzeuge entsprechen nicht c.M.V.S.S. 1103 – Abgasemissionen. Verstopftes Choke-Unterdruckverzögerungsventil. Hinweis: Betroffen sind Fahrzeuge mit Vergasermotoren mit 2,2 Liter Hubraum.
Die Entlüftungsöffnungen der Batteriedeckel können teilweise oder vollständig durch Kunststoffgrat verstopft sein. Folge des Mangels: Es könnte sich im Inneren ein Gasdruck aufbauen, der zum Bersten des Batteriegehäuses führen kann, insbesondere beim Nachladen. Befindet sich eine Person in der Nähe der Batterie, wenn das Gehäuse birst, kann sie durch die austretenden Gase und/oder die Säure verletzt werden.
These vehicles may not comply with cmvss 1103 - exhaust emissions.
These vehicles may not comply with cmvss 1103 - exhaust emissions.
Location of hydraulic brake tube to both rear wheels causes interference and chafing between the tubes and rear suspension trailing arm pivot brackets.
Die Hydraulikbremsleitung, die zum Bremssystem des linken Hinterrads verlegt ist, könnte bei der Montage verbogen worden sein und an der Befestigungsschraube des Abgasanlagenhalters scheuern.
On the involved vehicles, improper routing of the hydraulic brake tube could cause it to chafe against the park brake cables. Eventually, the brake tube may fail and brake fluid leakage may occur.
The brake hydraulic system bay be equipped with brake fluid containing an excess of water.
Involved vehicles may have been built with improperly forged or heat treated bolts used to attach the front suspension ball joints to the steering knuckles. Some of the bolts may eventually fail which could result in ball joint separation and affect vehicle directional controllability.
Clamp bolts installed on certain vehicles may contain cracks. Eventually these bolts may break through, causing separation of the ball joint from the steering knuckle.
The automatic speed control switch may stick in the "resume" position restricting return movement. This will not allow the normal brake pedal operation to deactivate the system.
The stop lamp switches installed on the subject vehicles may have inadequate internal switch contact pressure due to an incorrect formation of the switch contact terminals. This lack of switch contact continuity may render the (stop) brake warning lights inoperative.
Quellen: NHTSA (USA, gemeinfrei), Transport Canada (Open Government Licence – Canada), DVSA (Vereinigtes Königreich, Open Government Licence v3.0), RappelConso und EU-Safety-Gate (Frankreich, Licence Ouverte 2.0).